Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Op-amp LM 3900 N Multi-purpose PDIP 14

LM2900, LM3900

QUADRUPLE NORTON OPERATIONAL AMPLIFIERS

SLOS059 – JULY 1979 – REVISED SEPTEMBER 1990

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Wide Range of Supply Voltages, Single or

Dual Supplies

Wide Bandwidth

Large Output Voltage Swing

Output Short-Circuit Protection

Internal Frequency Compensation

Low Input Bias Current

Designed to Be Interchangeable With

National Semiconductor LM2900 and

LM3900, Respectively

description

These devices consist of four independent, high-

gain frequency-compensated Norton operational

amplifiers that were designed specifically to

operate from a single supply over a wide range of

voltages. Operation from split supplies is also

possible. The low supply current drain is

essentially independent of the magnitude of the

supply voltage. These devices provide wide band-

width and large output voltage swing.

The LM2900 is characterized for operation from

–40°C to 85°C, and the LM3900 is characterized

for operation from 0°C to 70°C.

schematic (each amplifier)

Constant

Current

Generator

200 µA

OUT

1.3 mA

IN +

IN –

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

–

IN+

IN–

OUT

1IN+

2IN+

2IN–

2OUT

1OUT

1IN–

GND

3IN+

4IN+

4IN–

4OUT

3OUT

3IN–

N PACKAGE

(TOP VIEW)

symbol (each amplifier)

Summary of content (23 pages)

PAGE 1
LM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS SLOS059 – JULY 1979 – REVISED SEPTEMBER 1990 D D D D D D D N PACKAGE (TOP VIEW) Wide Range of Supply Voltages, Single or Dual Supplies Wide Bandwidth Large Output Voltage Swing Output Short-Circuit Protection Internal Frequency Compensation Low Input Bias Current Designed to Be Interchangeable With National Semiconductor LM2900 and LM3900, Respectively 1IN + 2IN + 2IN – 2OUT 1OUT 1IN – GND 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 3IN + 4I
PAGE 2
LM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS SLOS059 – JULY 1979 – REVISED SEPTEMBER 1990 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) LM2900 LM3900 UNIT Supply voltage, VCC (see Note 1) 36 36 V Input current 20 20 mA unlimited unlimited Duration of output short circuit (one amplifier) to ground at (or below) 25°C free-air temperature (see Note 2) Continuous total dissipation See Dissipation Rating Table Operating free-air temperature
PAGE 3
LM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS SLOS059 – JULY 1979 – REVISED SEPTEMBER 1990 electrical characteristics, VCC = 15 V, TA = 25°C (unless otherwise noted) IIB LM2900 TEST CONDITIONS† PARAMETER Input bias current (inverting input) II + = 0 MIN Change in mirror gain MAX 30 200 TA = 25°C TA = Full range II+ = 20 µA to 200 µA TA = Full range, range See Note 4 Mirror gain LM3900 TYP MIN 300 09 0.9 TYP MAX 30 200 300 11 1.1 09 0.9 11 1.
PAGE 4
LM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS SLOS059 – JULY 1979 – REVISED SEPTEMBER 1990 TYPICAL CHARACTERISTICS† INPUT BIAS CURRENT (INVERTING INPUT) vs FREE-AIR TEMPERATURE MIRROR GAIN vs FREE-AIR TEMPERATURE 1.2 80 VCC = 15 V VO = 7.5 V II + = 0 VCC = 15 V II + = 10 µA 1.15 1.1 60 II – /I + – Mirror Gain IIB – Input Bias Current – nA 70 50 40 30 1.05 1 0.95 20 0.9 10 0.85 0 – 75 – 50 – 25 0 25 50 75 TA – Free-Air Temperature – °C 0.
PAGE 5
LM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS SLOS059 – JULY 1979 – REVISED SEPTEMBER 1990 TYPICAL CHARACTERISTICS† LARGE SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE SUPPLY VOLTAGE REJECTION RATIO vs FREQUENCY 100 KSVR – Supply Voltage Rejection Ratio – dB AVD – Differential Voltage Amplification 104 103 102 10 VCC = 15 V VO = 10 V RL = 10 kΩ 1 – 75 – 50 – 25 0 25 50 75 100 VCC = 15 V TA = 25°C 90 80 70 60 50 40 30 20 10 0 100 125 400 1 k TA – Free-Air Tempe
PAGE 6
LM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS SLOS059 – JULY 1979 – REVISED SEPTEMBER 1990 TYPICAL CHARACTERISTICS† LOW-LEVEL OUTPUT CURRENT vs SUPPLY VOLTAGE PULLDOWN CURRENT vs SUPPLY VOLTAGE 2 VOL = 1 V II + = 0 TA = 25°C 50 1.8 II – = 100 µA 40 30 20 II – = 10 µA 10 0 5 1.4 TA = 25°C 1.2 1 TA = 85°C 0.8 0.6 0.4 II – = 5 µA 0 TA = – 40°C 1.6 Pulldown Current – mA IOL– Low-Level Output Current – mA 60 0.
PAGE 7
LM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS SLOS059 – JULY 1979 – REVISED SEPTEMBER 1990 APPLICATION INFORMATION Norton (or current-differencing) amplifiers can be used in most standard general-purpose operational amplifier applications. Performance as a dc amplifier in a single-power-supply mode is not as precise as a standard integrated-circuit operational amplifier operating from dual supplies.
PAGE 8
LM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS SLOS059 – JULY 1979 – REVISED SEPTEMBER 1990 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PAGE 9
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
PAGE 10
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
PAGE 11
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
PAGE 12
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
PAGE 13
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
PAGE 14
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
PAGE 15
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
PAGE 16
PACKAGE OPTION ADDENDUM www.ti.
PAGE 17
PACKAGE OPTION ADDENDUM www.ti.
PAGE 18
PACKAGE OPTION ADDENDUM www.ti.com 23-Apr-2007 TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
PAGE 19
PACKAGE MATERIALS INFORMATION www.ti.
PAGE 20
PACKAGE MATERIALS INFORMATION www.ti.com Device 19-May-2007 Package Pins Site Reel Diameter (mm) Reel Width (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM2900DR D 14 MLA 330 16 6.5 9.0 2.1 8 16 Q1 LM3900DR D 14 MLA 330 16 6.5 9.0 2.1 8 16 Q1 TAPE AND REEL BOX INFORMATION Device Package Pins Site Length (mm) Width (mm) Height (mm) LM2900DR D 14 MLA 342.9 336.6 28.58 LM3900DR D 14 MLA 342.9 336.6 28.
PAGE 21
PAGE 22
PAGE 23
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.