Datasheet

DescriptionResetTypeNameBit/Field
RTC Wake-up Enable
DescriptionValue
Disabled0
Enabled1
When set, an RTC match event (RTCM0 or RTCM1) will re-power the
device based on the RTC counter value matching the corresponding
match register 0 or 1.
0R/WRTCWEN3
Hibernation Module Clock Select
DescriptionValue
Use Divide by 128 output. Use this value for a
4.194304-MHz crystal.
0
Use raw output. Use this value for a 32.768-kHz
oscillator.
1
0R/WCLKSEL2
Hibernation Request
DescriptionValue
Disabled0
Hibernation initiated1
After a wake-up event, this bit is cleared by hardware.
0R/WHIBREQ1
RTC Timer Enable
DescriptionValue
Disabled0
Enabled1
0R/WRTCEN0
June 18, 2012256
Texas Instruments-Production Data
Hibernation Module
NRND: Not recommended for new designs.