Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsPMICsPMIC - voltage reference Shunt Adjustable SOT 23-3

LM4040-N, LM4040Q-N

www.ti.com

SNOS633H –OCTOBER 2000–REVISED APRIL 2013

LM4040-N/LM4040Q-N Precision Micropower Shunt Voltage Reference

Check for Samples: LM4040-N, LM4040Q-N

FEATURES

DESCRIPTION

Ideal for space critical applications, the LM4040-N

• 2.5V/SOT-23 AEC Q-100 Grades 1 and 3

precision voltage reference is available in the sub-

available

miniature SC70 and SOT-23 surface-mount package.

• Small Packages: SOT-23, TO-92 and SC70

The LM4040-N's advanced design eliminates the

• No Output Capacitor Required

need for an external stabilizing capacitor while

ensuring stability with any capacitive load, thus

• Tolerates Capacitive Loads

making the LM4040-N easy to use. Further reducing

• Fixed Reverse Breakdown Voltages of 2.048V,

design effort is the availability of several fixed reverse

2.500V,3.000V, 4.096V, 5.000V, 8.192V, and

breakdown voltages: 2.048V, 2.500V, 3.000V,

10.000V

4.096V, 5.000V, 8.192V, and 10.000V. The minimum

operating current increases from 60 μA for the 2.5-V

APPLICATIONS

LM4040-N to 100 μA for the 10.0-V LM4040-N. All

versions have a maximum operating current of

• Portable, Battery-Powered Equipment

15 mA.

• Data Acquisition Systems

The LM4040-N utilizes fuse and zener-zap reverse

• Instrumentation

breakdown voltage trim during wafer sort to ensure

• Process Control

that the prime parts have an accuracy of better than

±0.1% (A grade) at 25°C. Bandgap reference

• Energy Management

temperature drift curvature correction and low

• Product Testing

dynamic impedance ensure stable reverse

• Automotive

breakdown voltage accuracy over a wide range of

operating temperatures and currents.

• Precision Audio Components

Also available is the LM4041-N with two reverse

breakdown voltage versions: adjustable and 1.2V.

Please see the LM4041-N data sheet.

Key Specifications (2.5-V LM4040-N)

VALUE UNIT

Output voltage tolerance (A grade, 25°C) ±0.1 % (max)

Low output noise (10 Hz to 10 kHz) 35 μV

rms

(typ)

Wide operating current range 60 to 15 μA to mA

Industrial temperature range −40 to +85 °C

Extended temperature range −40 to +125 °C

Low temperature coefficient 100 ppm/°C (max)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (51 pages)

PAGE 1
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 LM4040-N/LM4040Q-N Precision Micropower Shunt Voltage Reference Check for Samples: LM4040-N, LM4040Q-N FEATURES DESCRIPTION • Ideal for space critical applications, the LM4040-N precision voltage reference is available in the subminiature SC70 and SOT-23 surface-mount package.
PAGE 2
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com Connection Diagrams - 1 5 N/C 2 N/C* 3 *This pin must be left floating or connected to pin 2. + 4 N/C *This pin must be left floating or connected to pin 1. Figure 1. SOT-23 (Top View) See Package Number DBZ (JEDEC Registration TO-236AB) Figure 2. TO-92 (Bottom View) See Package Number LP Figure 3.
PAGE 3
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 R8C (SOT-23 only) Reference, 8.192V, ±0.5% R0C (SOT-23 only) Reference, 10.000V, ±0.5% RJD Reference, 2.048V, ±1.0% R2D Reference, 2.500V, ±1.0% RKD Reference, 3.000V, ±1.0% R4D Reference, 4.096V, ±1.0% R5D Reference, 5.000V, ±1.0% R8D (SOT-23 only) Reference, 8.192V, ±1.0% R0D (SOT-23 only) Reference, 10.000V, ±1.0% RJE Reference, 2.048V, ±2.0% R2E Reference, 2.500V, ±2.0% RKE Reference, 3.000V, ±2.
PAGE 4
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com Operating Ratings (1) (2) Temperature Range (Tmin ≤ TA ≤ Tmax) Reverse Current (1) (2) 4 Industrial Temperature Range −40°C ≤ TA ≤ +85°C Extended Temperature Range −40°C ≤ TA ≤ +125°C LM4040-N-2.0 60 μA to 15 mA LM4040-N-2.5 60 μA to 15 mA LM4040-N-3.0 62 μA to 15 mA LM4040-N-4.1 68 μA to 15 mA LM4040-N-5.0 74 μA to 15 mA LM4040-N-8.2 91 μA to 15 mA LM4040-N-10.
PAGE 5
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 2.0-V LM4040-N Electrical Characteristics VR Tolerance Grades 'A' and 'B'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and ±0.2%, respectively.
PAGE 6
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com 2.0-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C', 'D', and 'E'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1.0% and ±2.0%, respectively.
PAGE 7
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 2.0-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C', 'D', and 'E'; Temperature Grade 'E' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1.0% and ±2.0%, respectively.
PAGE 8
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com 2.5-V LM4040-N Electrical Characteristics VR Tolerance Grades 'A' and 'B'; Temperature Grade 'I' (AEC Grade 3) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and ±0.2%, respectively.
PAGE 9
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 2.5-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C', 'D', and 'E'; Temperature Grade 'I' (AEC Grade 3) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1.0% and ±2.0%, respectively.
PAGE 10
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com 2.5-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C', 'D', and 'E'; Temperature Grade 'E' (AEC Grade 1) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1.0% and ±2.0%, respectively.
PAGE 11
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 3.0-V LM4040-N Electrical Characteristics VR Tolerance Grades 'A' and 'B'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and ±0.2%, respectively.
PAGE 12
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com 3.0-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C', 'D', and 'E'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1.0% and ±2.0%, respectively.
PAGE 13
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 3.0-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C', 'D', and 'E'; Temperature Grade 'E' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1.0% and ±2.0%, respectively.
PAGE 14
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com 4.1-V LM4040-N Electrical Characteristics VR Tolerance Grades 'A' and 'B'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and ±0.2%, respectively.
PAGE 15
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 4.1-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C' and 'D'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and ±1.0%, respectively.
PAGE 16
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com 5.0-V LM4040-N Electrical Characteristics VR Tolerance Grades 'A' and 'B'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and ±0.2%, respectively.
PAGE 17
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 5.0-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C' and 'D'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and ±1.0%, respectively.
PAGE 18
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com 5.0-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C' and 'D'; Temperature Grade 'E' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and ±1.0%, respectively.
PAGE 19
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 8.2-V LM4040-N Electrical Characteristics VR Tolerance Grades 'A' and 'B'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and ±0.2%, respectively.
PAGE 20
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com 8.2-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C' and 'D'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and ±1.0%, respectively.
PAGE 21
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 10-V LM4040-N Electrical Characteristics VR Tolerance Grades 'A' and 'B'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and ±0.2%, respectively.
PAGE 22
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com 10.0-V LM4040-N Electrical Characteristics VR Tolerance Grades 'C' and 'D'; Temperature Grade 'I' Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and ±1.0%, respectively.
PAGE 23
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 Typical Performance Characteristics Temperature Drift for Different Average Temperature Coefficient Output Impedance vs Frequency Figure 4. Figure 5. Output Impedance vs Frequency Reverse Characteristics and Minimum Operating Current Figure 6. Figure 7. Noise Voltage vs Frequency Figure 8.
PAGE 24
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com Start-Up Characteristics LM4040-N-2.5 Figure 9. LM4040-N-5.0 Figure 10. RS = 30k LM4040-N-10.0 Figure 11. 24 Submit Documentation Feedback RS = 30k RS = 30k Figure 12.
PAGE 25
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 Functional Block Diagram APPLICATIONS INFORMATION The LM4040-N is a precision micro-power curvature-corrected bandgap shunt voltage reference. For space critical applications, the LM4040-N is available in the sub-miniature SOT-23 and SC70 surface-mount package. The LM4040-N has been designed for stable operation without the need of an external capacitor connected between the “+” pin and the “−” pin.
PAGE 26
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com Typical Applications Figure 13. Shunt Regulator **Ceramic monolithic *Tantalum Figure 14. 4.1-V LM4040-N's Nominal 4.
PAGE 27
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 Nominal clamping voltage is ±11.5V (LM4040-N's reverse breakdown voltage +2 diode VF). Figure 15. Bounded amplifier reduces saturation-induced delays and can prevent succeeding stage damage. The bounding voltage is ±4V with the 2.5-V LM4040-N (LM4040-N's reverse breakdown voltage + 3 diode VF). Figure 16. Protecting Op Amp input.
PAGE 28
LM4040-N, LM4040Q-N SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 www.ti.com Figure 17. Precision ±4.096V Reference Figure 18.
PAGE 29
LM4040-N, LM4040Q-N www.ti.com SNOS633H – OCTOBER 2000 – REVISED APRIL 2013 REVISION HISTORY Changes from Revision G (April 2013) to Revision H • Page Changed layout of National Data Sheet to TI format ..........................................................................................................
PAGE 30
PACKAGE OPTION ADDENDUM www.ti.com 2-Jun-2014 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040AIM3-10.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R0A LM4040AIM3-10.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R0A LM4040AIM3-2.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI RJA LM4040AIM3-2.
PAGE 31
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 2-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040AIZ-10.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040A IZ10 LM4040AIZ-2.5/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040A IZ2.5 LM4040AIZ-4.
PAGE 32
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 2-Jun-2014 Status (1) LM4040BIM3X-3.0/NOPB Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKB (4/5) ACTIVE SOT-23 DBZ 3 3000 LM4040BIM3X-4.1 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R4B LM4040BIM3X-4.
PAGE 33
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 2-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040CEM3X-5.0 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R5C LM4040CEM3X-5.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5C LM4040CIM3-10.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R0C LM4040CIM3-10.
PAGE 34
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 2-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040CIM3X-4.1 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R4C LM4040CIM3X-4.1/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R4C LM4040CIM3X-5.0 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R5C LM4040CIM3X-5.
PAGE 35
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 2-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040DIM3-10.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R0D LM4040DIM3-10.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R0D LM4040DIM3-2.
PAGE 36
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 2-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040DIM7-2.0/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJD LM4040DIM7-2.5/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2D LM4040DIM7-5.
PAGE 37
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 2-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040QAIM3X2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6A LM4040QBIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6B LM4040QBIM3X2.
PAGE 38
PACKAGE OPTION ADDENDUM www.ti.com 2-Jun-2014 Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.
PAGE 39
PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ SOT-23 DBZ 3 1000 178.0 8.4 LM4040AIM3-10.0/NOPB SOT-23 LM4040AIM3-10.0 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.3 2.9 1.22 4.0 8.0 Q3 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3-2.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.
PAGE 40
PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 Device Package Package Pins Type Drawing LM4040AIM3X-4.1/NOPB SOT-23 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3X-5.0/NOPB SOT-23 LM4040AIM3X-5.0 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.
PAGE 41
PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) LM4040CIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 LM4040CIM3-3.0 SOT-23 DBZ 3 1000 178.0 8.4 LM4040CIM3-3.0/NOPB SOT-23 DBZ 3 1000 178.0 LM4040CIM3-4.1 SOT-23 DBZ 3 1000 178.0 LM4040CIM3-4.1/NOPB SOT-23 DBZ 3 1000 W Pin1 (mm) Quadrant 3.3 2.9 1.22 4.0 8.0 Q3 3.3 2.9 1.22 4.0 8.0 Q3 8.4 3.
PAGE 42
PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 Device Package Package Pins Type Drawing LM4040DIM3X-2.0/NOPB SOT-23 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3X-2.5/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3X-3.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.
PAGE 43
PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040AIM3-10.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-10.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-2.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-2.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-2.5 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-2.
PAGE 44
PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040AIM3X-5.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040BIM3-10.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-10.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-2.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-2.5 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.
PAGE 45
PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040CIM3-4.1 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-4.1/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-5.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-5.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-8.2 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-8.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.
PAGE 46
PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040DIM3X-4.1 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-4.1/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-5.0 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-5.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM7-2.0/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4040DIM7-2.5/NOPB SC70 DCK 5 1000 210.0 185.0 35.
PAGE 47
PAGE 48
PAGE 49
PAGE 50
PAGE 51
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.