Datasheet
LM7341
www.ti.com
SNOSAW9B –MAY 2008–REVISED MARCH 2013
LM7341 Rail-to-Rail Input/Output ±15V, 4.6 MHz GBW, Operational Amplifier in SOT-23
Package
Check for Samples: LM7341
1
FEATURES
DESCRIPTION
The LM7341 is a rail-to-rail input and output amplifier
2
• (V
S
= ±15V, T
A
= 25°C, Typical Values.)
in a small SOT-23 package with a wide supply
• Tiny 5-pin SOT-23 Package Saves Space
voltage and temperature range. The LM7341 has a
• Greater than Rail-to-Rail Input CMVR −15.3V to
4.6 MHz gain bandwidth and a 1.9 volt per
15.3V
microsecond slew rate, and draws 0.75 mA of supply
current at no load.
• Rail-to-Rail Output Swing −14.84V to 14.86V
The LM7341 is tested at −40°C, 125°C and 25°C with
• Supply Current 0.7 mA
modern automatic test equipment. Detailed
• Gain Bandwidth 4.6 MHz
performance specifications at 2.7V, ±5V, and ±15V
• Slew Rate 1.9 V/µs
and over a wide temperature range make the
• Wide Supply Range 2.7V to 32V
LM7341 a good choice for automotive, industrial, and
other demanding applications.
• High Power Supply Rejection Ratio 106 dB
Greater than rail-to-rail input common mode range
• High Common Mode Rejection Ratio 115 dB
with a minimum 76 dB of common mode rejection at
• Excellent Gain 106 dB
±15V makes the LM7341 a good choice for both high
• Temperature Range −40°C to 125°C
and low side sensing applications.
• Tested at −40°C, 125°C and 25°C at 2.7V, ±5V
LM7341 performance is consistent over a wide
and ±15V
voltage range, making the part useful for applications
where the supply voltage can change, such as
APPLICATIONS
automotive electrical systems and battery powered
electronics.
• Automotive
• Industrial Robotics
The LM7341 uses a small SOT23-5 package, which
takes up little board space, and can be placed near
• Sensor Output Buffers
signal sources to reduce noise pickup.
• Multiple Voltage Power Supplies
• Reverse Biasing of Photodiodes
• Low Current Optocouplers
• High Side Sensing
• Comparator
• Battery Chargers
• Test Point Output Buffers
• Below Ground Current Sensing
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2008–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.