Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - telecommunication SOIC 8

LM567, LM567C

www.ti.com

SNOSBQ4D –MAY 1999–REVISED MARCH 2013

LM567/LM567C Tone Decoder

Check for Samples: LM567, LM567C

FEATURES

APPLICATIONS

• 20 to 1 Frequency Range with an External

• Touch Tone Decoding

Resistor

• Precision Oscillator

• Logic Compatible Output with 100 mA Current

• Frequency Monitoring and Control

Sinking Capability

• Wide Band FSK Demodulation

• Bandwidth Adjustable from 0 to 14%

• Ultrasonic Controls

• High Rejection of Out of Band Signals and

• Carrier Current Remote Controls

Noise

• Communications Paging Decoders

• Immunity to False Signals

• Highly Stable Center Frequency

DESCRIPTION

• Center Frequency Adjustable from 0.01 Hz to

The LM567 and LM567C are general purpose tone

500 kHz

decoders designed to provide a saturated transistor

switch to ground when an input signal is present

within the passband. The circuit consists of an I and

Q detector driven by a voltage controlled oscillator

which determines the center frequency of the

decoder. External components are used to

independently set center frequency, bandwidth and

output delay.

CONNECTION DIAGRAM

Figure 1. Metal Can Package Figure 2. PDIP and SOIC Packages

Top View Top View

See Package Number LMC0008C See Package Number D0008A

OBSOLETE See Package Number P0008E

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (18 pages)

PAGE 1
LM567, LM567C www.ti.com SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 LM567/LM567C Tone Decoder Check for Samples: LM567, LM567C FEATURES APPLICATIONS • • • • • • • • 1 2 • • • • • • 20 to 1 Frequency Range with an External Resistor Logic Compatible Output with 100 mA Current Sinking Capability Bandwidth Adjustable from 0 to 14% High Rejection of Out of Band Signals and Noise Immunity to False Signals Highly Stable Center Frequency Center Frequency Adjustable from 0.
PAGE 2
LM567, LM567C SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. ABSOLUTE MAXIMUM RATINGS (1) (2) (3) Supply Voltage Pin Power Dissipation 9V (4) 1100 mW V8 15V V3 −10V V3 V4 + 0.
PAGE 3
LM567, LM567C www.ti.com SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 ELECTRICAL CHARACTERISTICS (continued) AC Test Circuit, TA = 25°C, V+ = 5V Parameters Center Frequency Stability (4.75–5.75V) Conditions 0 < TA < 70 −55 < TA < +125 Center Frequency Shift with Supply Voltage 4.75V–6.75V 4.75V–9V Fastest ON-OFF Cycling Rate LM567 Min Typ LM567C/LM567CM Max 35 ± 60 35 ± 140 0.5 Min Typ 35 ± 60 35 ± 140 1.0 2.0 fo/20 0.4 Units Max ppm/°C ppm/°C 2.0 2.
PAGE 4
LM567, LM567C SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 www.ti.
PAGE 5
LM567, LM567C www.ti.com SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 TYPICAL PERFORMANCE CHARACTERISTICS Typical Frequency Drift Typical Bandwidth Variation Figure 3. Figure 4. Typical Frequency Drift Typical Frequency Drift Figure 5. Figure 6. Bandwidth vs Input SignalAmplitude Largest Detection Bandwidth Figure 7. Figure 8.
PAGE 6
LM567, LM567C SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 www.ti.com TYPICAL PERFORMANCE CHARACTERISTICS (continued) 6 Detection Bandwidth as a Function of C2 and C3 Typical Supply Current vs Supply Voltage Figure 9. Figure 10. Greatest Number of Cycles Before Output Typical Output Voltage vs Temperature Figure 11. Figure 12.
PAGE 7
LM567, LM567C www.ti.com SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 TYPICAL APPLICATIONS Component values (typ) R1 6.8 to 15k R2 4.7k R3 20k C1 0.10 mfd C2 1.0 mfd 6V C3 2.2 mfd 6V C4 250 mfd 6V Figure 13.
PAGE 8
LM567, LM567C SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 www.ti.com Connect Pin 3 to 2.8V to Invert Output Figure 14. Oscillator with Quadrature Output Figure 15. Oscillator with Double Frequency Output Figure 16.
PAGE 9
LM567, LM567C www.ti.com SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 AC TEST CIRCUIT fi = 100 kHz + 5V *Note: Adjust for fo = 100 kHz. APPLICATIONS INFORMATION The center frequency of the tone decoder is equal to the free running frequency of the VCO.
PAGE 10
LM567, LM567C SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 www.ti.com LM567C MDC MWC ToNE DECODER Figure 17. Die Layout (C - Step) Table 1. Die/Wafer Characteristics Fabrication Attributes General Die Information Physical Die Identification LM567C Bond Pad Opening Size (min) 91µm x 91µm Die Step C Bond Pad Metalization 0.5% COPPER_BAL. ALUMINUM Passivation VOM NITRIDE Physical Attributes Wafer Diameter 150mm Back Side Metal BARE BACK Dise Size (Drawn) 1600µm x 1626µm 63.0mils x 64.
PAGE 11
LM567, LM567C www.ti.com SNOSBQ4D – MAY 1999 – REVISED MARCH 2013 REVISION HISTORY Changes from Revision C (March 2013) to Revision D • Page Changed layout of National Data Sheet to TI format ..........................................................................................................
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.
PAGE 13
PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.
PAGE 14
PACKAGE MATERIALS INFORMATION www.ti.com 26-Mar-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device LM567CMX/NOPB Package Package Pins Type Drawing SOIC D 8 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2500 330.0 12.4 Pack Materials-Page 1 6.5 B0 (mm) K0 (mm) P1 (mm) 5.4 2.0 8.0 W Pin1 (mm) Quadrant 12.
PAGE 15
PACKAGE MATERIALS INFORMATION www.ti.com 26-Mar-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM567CMX/NOPB SOIC D 8 2500 367.0 367.0 35.
PAGE 16
PAGE 17
PAGE 18
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.