Datasheet

LMH6657, LMH6658
www.ti.com
SNOSA35F AUGUST 2002REVISED MARCH 2013
LMH6657/LMH6658 270MHz Single Supply, Single & Dual Amplifiers
Check for Samples: LMH6657, LMH6658
1
FEATURES
DESCRIPTION
The LMH6657/6658 are low-cost operational
2
V
S
= 5V, T
A
= 25°C, R
L
= 100 (Typical Values
amplifiers that operate from a single supply with input
Unless Specified)
voltage range extending below the V
. Based on easy
3dB BW (A
V
= +1) 270MHz
to use voltage feedback topology and boasting fast
Supply Voltage Range 3V to 12V
slew rate (700V/µs) and high speed (140MHz
GBWP), the LMH6657 (Single) and LMH6658 (dual)
Slew Rate, (V
S
= ±5V) 700V/µs
can be used in high speed large signal applications.
Supply Current 6.2mA/amp
These applications include instrumentation,
Output Current +80/90mA
communication devices, set-top boxes, etc.
Input Common Mode volt. 0.5V Beyond V
,
With a -3dB BW of 100MHz (A
V
= +2) and DG & DP
1.7V from V
+
of 0.03% & 0.10° respectively, the LMH6657/6658
are well suited for video applications. The output
Output Voltage Swing (R
L
= 2k) 0.8V from
stage can typically supply 80mA into the load with a
Rails
swing of about 1V from either rail.
Input Voltage Noise 11nV/Hz
For Industrial applications, the LMH6657/6658 are
Input Current Noise 2.1pAHz/
excellent cost-saving choices. Input referred voltage
DG Error 0.03%
noise is low and the input voltage can extend below
DP Error 0.10°
V
to ease amplification of low level signals that could
be at or near the system ground. With low distortion
THD (5MHz) 55dBc
and fast settling, LMH6657/6658 can provide
Settling Time (0.1%) 37ns
buffering for A/D and D/A applications.
Fully Characterized for 5V, and ±5V
The LMH6657/6658 versatility and ease of use is
Output Overdrive Recovery 18ns
extended even further by offering these high slew
Output Short Circuit Protected
(1)
rate , high speed Op Amps in miniature packages
such as SOT-23-5, SC70, SOIC-8, and VSSOP-8.
No Output Phase Reversal with CMVR
Refer to the Ordering Information section for
Exceeded
packaging options available for each device.
APPLICATIONS
CD/DVD ROM
ADC Buffer Amp
Portable Video
Current Sense Buffer
Portable Communications
(1) Short Circuit Test is a momentary test.
See Note 7 under Absolute Maximum Ratings.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2002–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.

Summary of content (29 pages)