Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Op-amp Multi-purpose SOIC 14

1OUT

1IN–

1IN+

CC+

2IN+

2IN–

2OUT

4OUT

4IN–

4IN+

GND

3IN+

3IN–

3OUT

LMV324 . . . D (SOIC) OR PW (TSSOP) PACKAGE

(TOP VIEW)

LMV358 . . . D (SOIC), DDU (VSSOP),

DGK (MSOP), OR PW (TSSOP) PACKAGE

(TOP VIEW)

1OUT

1IN–

1IN+

GND

CC+

2OUT

2IN–

2IN+

LMV321 . . . DBV (SOT-23) OR DCK (SC-70) PACKAGE

(TOP VIEW)

CC+

OUT

1IN+

GND

1IN–

1OUT

1IN–

1IN+

2IN+

2IN–

2OUT

1/2 SHDN

4OUT

4IN–

4IN+

GND

3IN+

3IN–

3OUT

3/4 SHDN

LMV324S . . . D (SOIC) OR PW (TSSOP) PACKAGE

(TOP VIEW)

LMV321 SINGLE, LMV358 DUAL

LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN

www.ti.com

SLOS263U –AUGUST 1999–REVISED JULY 2012

LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS

Check for Samples: LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN

FEATURES

• 2.7-V and 5-V Performance

• –40°C to 125°C Operation

• Low-Power Shutdown Mode (LMV324S)

• No Crossover Distortion

• Low Supply Current

– LMV321 . . . 130 μA Typ

– LMV358 . . . 210 μA Typ

– LMV324 . . . 410 μA Typ

– LMV324S . . . 410 μA Typ

• Rail-to-Rail Output Swing

• ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 1000-V Charged-Device Model (C101)

DESCRIPTION/

ORDERING INFORMATION

The LMV321, LMV358, and LMV324/LMV324S are

single, dual, and quad low-voltage (2.7 V to 5.5 V)

operational amplifiers with rail-to-rail output swing.

The LMV324S, which is a variation of the standard

LMV324, includes a power-saving shutdown feature

that reduces supply current to a maximum of 5 μA

per channel when the amplifiers are not needed.

Channels 1 and 2 together are put in shutdown, as

are channels 3 and 4. While in shutdown, the outputs

actively are pulled low.

The LMV321, LMV358, LMV324, and LMV324S are

the most cost-effective solutions for applications

where low-voltage operation, space saving, and low

cost are needed. These amplifiers are designed

specifically for low-voltage (2.7 V to 5 V) operation,

with performance specifications meeting or exceeding

the LM358 and LM324 devices that operate from 5 V

to 30 V. Additional features of the LMV3xx devices

are a common-mode input voltage range that

includes ground, 1-MHz unity-gain bandwidth, and 1-

V/μs slew rate.

The LMV321 is available in the ultra-small DCK (SC-

70) package, which is approximately one-half the size

of the DBV (SOT-23) package. This package saves

space on printed circuit boards and enables the

design of small portable electronic devices. It also

allows the designer to place the device closer to the

signal source to reduce noise pickup and increase

signal integrity.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (46 pages)

PAGE 1
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN www.ti.com SLOS263U – AUGUST 1999 – REVISED JULY 2012 LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS Check for Samples: LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN FEATURES 1 • • • • • • • 2.7-V and 5-V Performance –40°C to 125°C Operation Low-Power Shutdown Mode (LMV324S) No Crossover Distortion Low Supply Current – LMV321 . . . 130 μA Typ – LMV358 . . . 210 μA Typ – LMV324 . . . 410 μA Typ – LMV324S .
PAGE 2
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN SLOS263U – AUGUST 1999 – REVISED JULY 2012 www.ti.
PAGE 3
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN www.ti.
PAGE 4
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN SLOS263U – AUGUST 1999 – REVISED JULY 2012 www.ti.com Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN (2) VCC Supply voltage VID Differential input voltage (3) VI Input voltage range (either input) Duration of output short circuit (one amplifier) to ground (4) –0.2 At or below TA = 25°C, VCC ≤ 5.
PAGE 5
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN www.ti.com SLOS263U – AUGUST 1999 – REVISED JULY 2012 Electrical Characteristics VCC+ = 2.7 V, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (1) MAX 1.7 7 UNIT VIO Input offset voltage αVIO Average temperature coefficient of input offset voltage IIB Input bias current IIO Input offset current CMRR Common-mode rejection ratio VCM = 0 to 1.
PAGE 6
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN SLOS263U – AUGUST 1999 – REVISED JULY 2012 www.ti.com Electrical Characteristics VCC+ = 5 V, at specified free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS TA (1) MIN 25°C TYP (2) MAX 1.
PAGE 7
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN www.ti.com SLOS263U – AUGUST 1999 – REVISED JULY 2012 Shutdown Characteristics (LMV324S) VCC+ = 5 V, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (1) MAX UNIT ICC(SHDN) Supply current in shutdown mode (per channel) SHDN ≤ 0.
PAGE 8
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN SLOS263U – AUGUST 1999 – REVISED JULY 2012 www.ti.com TYPICAL CHARACTERISTICS LMV321 FREQUENCY RESPONSE vs RESISTIVE LOAD LMV321 FREQUENCY RESPONSE vs RESISTIVE LOAD Vs = 2.
PAGE 9
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN www.ti.com SLOS263U – AUGUST 1999 – REVISED JULY 2012 TYPICAL CHARACTERISTICS (continued) STABILITY vs CAPACITIVE LOAD LMV321 FREQUENCY RESPONSE vs TEMPERATURE 120 80 Vs = 5.0 V RL = 2 kΩ 60 Gain − dB 75 25°C 60 40 −40°C 45 Gain 20 30 85°C 25°C 10 −10 1k 10 k 100 VCC = ±2.5 V AV = +1 RL = 2 kΩ VO = 100 mVPP 10 −2 −15 10 M 100 k 1M Frequency − Hz −1.5 −1 10000 2.
PAGE 10
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN SLOS263U – AUGUST 1999 – REVISED JULY 2012 www.ti.com TYPICAL CHARACTERISTICS (continued) SLEW RATE vs SUPPLY VOLTAGE STABILITY vs CAPACITIVE LOAD 10000 1.500 RL = 100 kΩ 1.400 LMV3xx (25% Overshoot) 1.300 Slew Rate − V/µs Capacitive Load − nF VCC = ±2.5 V RL = 1 MΩ AV = 10 VO = 100 mVPP 1000 LMV324S (25% Overshoot) 100 134 kΩ 1.21 MΩ Gain 1.200 NSLEW 1.100 1.000 LMV3xx PSLEW 0.900 0.800 +2.5 V NSLEW _ VI VO + RL 0.
PAGE 11
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN www.ti.com SLOS263U – AUGUST 1999 – REVISED JULY 2012 TYPICAL CHARACTERISTICS (continued) SOURCE CURRENT vs OUTPUT VOLTAGE SOURCE CURRENT vs OUTPUT VOLTAGE 100 100 VCC = 2.7 V VCC = 5 V 10 Sourcing Current − mA Sourcing Current − mA 10 LMV3xx 1 LMV324S 0.1 1 LMV324S 0.1 0.01 0.01 0.001 0.001 LMV3xx 0.01 0.1 1 0.001 0.001 10 0.01 Output Voltage Referenced to VCC+ − V Figure 13.
PAGE 12
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN SLOS263U – AUGUST 1999 – REVISED JULY 2012 www.ti.com TYPICAL CHARACTERISTICS (continued) SHORT-CIRCUIT CURRENT vs TEMPERATURE SHORT-CIRCUIT CURRENT vs TEMPERATURE 120 300 LMV324S VCC = 5 V 270 Sinking Current − mA LMV324S VCC = 5 V 210 Sourcing Current − mA 100 240 LMV3xx VCC = 5 V 180 150 120 LMV3xx VCC = 2.7 V 90 60 LMV324S VCC = 2.7 V 80 LMV3xx VCC = 5 V 60 LMV3xx VCC = 2.7 V 40 LMV324S VCC = 2.
PAGE 13
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN www.ti.com SLOS263U – AUGUST 1999 – REVISED JULY 2012 TYPICAL CHARACTERISTICS (continued) +kSVR vs FREQUENCY −kSVR vs FREQUENCY 80 80 VCC = −2.7 V RL = 10 kΩ LMV324S 70 70 LMV3xx +k SVR − dB 50 40 30 50 30 20 10 10 100 1k 10k 100k 0 100 1M LMV3xx 40 20 0 1k 10k Frequency − Hz Figure 21. Figure 22.
PAGE 14
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN SLOS263U – AUGUST 1999 – REVISED JULY 2012 www.ti.com TYPICAL CHARACTERISTICS (continued) OPEN-LOOP OUTPUT IMPEDANCE vs FREQUENCY CROSSTALK REJECTION vs FREQUENCY 150 110 LMV3xx VCC = 5 V Impedance − Ω 90 80 70 LMV324S VCC = 2.7 V 60 50 LMV324S VCC = 5 V 40 VCC = 5 V RL = 5 kΩ AV = 1 VO = 3 VPP 140 Crosstalk Rejection − dB 100 LMV3xx VCC = 2.
PAGE 15
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN www.ti.com SLOS263U – AUGUST 1999 – REVISED JULY 2012 TYPICAL CHARACTERISTICS (continued) NONINVERTING LARGE-SIGNAL PULSE RESPONSE NONINVERTING SMALL-SIGNAL PULSE RESPONSE Input Input LMV3xx LMV324S 50 mV/Div 1 V/Div LMV3xx LMV324S VCC = ±2.5 V RL = 2 kΩ TA = −40°C VCC = ±2.5 V RL = 2 kΩ TA = 25°C 1 µs/Div 1 µs/Div Figure 29. Figure 30.
PAGE 16
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN SLOS263U – AUGUST 1999 – REVISED JULY 2012 www.ti.com TYPICAL CHARACTERISTICS (continued) INVERTING LARGE-SIGNAL PULSE RESPONSE INVERTING LARGE-SIGNAL PULSE RESPONSE Input Input LMV3xx 1 V/Div 1 V/Div LMV3xx LMV324S LMV324S VCC = ±2.5 V RL = 2 kΩ TA = 25°C VCC = ±2.5 V RL = 2 kΩ TA = 85°C 1 µs/Div 1 µs/Div Figure 33. Figure 34.
PAGE 17
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN www.ti.com SLOS263U – AUGUST 1999 – REVISED JULY 2012 TYPICAL CHARACTERISTICS (continued) INVERTING SMALL-SIGNAL PULSE RESPONSE Input Input LMV3xx LMV3xx 50 mV/Div 50 mV/Div INVERTING SMALL-SIGNAL PULSE RESPONSE LMV324S LMV324S VCC = ±2.5 V RL = 2 kΩ TA = −40°C VCC = ±2.5 V RL = 2 kΩ TA = 85°C 1 µs/Div 1 µs/Div Figure 37. Figure 38. INPUT CURRENT NOISE vs FREQUENCY INPUT CURRENT NOISE vs FREQUENCY 0.50 0.80 0.60 0.40 0.
PAGE 18
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN SLOS263U – AUGUST 1999 – REVISED JULY 2012 www.ti.com TYPICAL CHARACTERISTICS (continued) THD + N vs FREQUENCY INPUT VOLTAGE NOISE vs FREQUENCY 10.000 200 160 1.000 140 THD − % Input Voltage Noise − nV/ Hz 180 VCC = 2.7 V RL = 10 kΩ AV = 1 VO = 1 VPP 120 100 LMV3xx 0.100 80 VCC = 2.7 V 60 0.010 LMV324S 40 VCC = 5 V 0.001 20 10 100 1k 10 10k 100 10000 Frequency − Hz Figure 41. Figure 42.
PAGE 19
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN www.ti.com SLOS263U – AUGUST 1999 – REVISED JULY 2012 TYPICAL CHARACTERISTICS (continued) THD + N vs FREQUENCY 10.000 VCC = 5 V RL = 10 kΩ AV = 10 VO = 2.5 VPP 1.000 THD − % LMV324S 0.100 0.010 LMV3xx 0.001 10 100 1000 10000 100000 Frequency − Hz Figure 45.
PAGE 20
LMV321 SINGLE, LMV358 DUAL LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN SLOS263U – AUGUST 1999 – REVISED JULY 2012 www.ti.com REVISION HISTORY Changes from Revision T (September 2007) to Revision U • 20 Page Updated θJA value for DDU package. ...................................................................................................................................
PAGE 21
PACKAGE OPTION ADDENDUM www.ti.
PAGE 22
PACKAGE OPTION ADDENDUM www.ti.
PAGE 23
PACKAGE OPTION ADDENDUM www.ti.
PAGE 24
PACKAGE OPTION ADDENDUM www.ti.
PAGE 25
PACKAGE OPTION ADDENDUM www.ti.com (4) 18-Oct-2013 There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device.
PAGE 26
PACKAGE MATERIALS INFORMATION www.ti.com 15-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) LMV321IDBVR SOT-23 DBV 5 3000 180.0 9.2 LMV321IDBVR SOT-23 DBV 5 3000 178.0 LMV321IDBVT SOT-23 DBV 5 250 180.
PAGE 27
PACKAGE MATERIALS INFORMATION www.ti.com 15-Oct-2013 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LMV358IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 LMV358IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 LMV358IDRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 LMV358IDRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.
PAGE 28
PACKAGE MATERIALS INFORMATION www.ti.com 15-Oct-2013 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LMV324IDR SOIC D 14 2500 364.0 364.0 27.0 LMV324IDRG4 SOIC D 14 2500 333.2 345.9 28.6 LMV324IPWR TSSOP PW 14 2000 364.0 364.0 27.0 LMV324IPWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 LMV324QDR SOIC D 14 2500 367.0 367.0 38.0 LMV324QPWR TSSOP PW 14 2000 367.0 367.0 35.0 LMV358IDDUR VSSOP DDU 8 3000 202.0 201.0 28.
PAGE 29
PAGE 30
PAGE 31
PAGE 32
PAGE 33
PAGE 34
PAGE 35
PAGE 36
PAGE 37
PAGE 38
PAGE 39
PAGE 40
PAGE 41
PAGE 42
PAGE 43
PAGE 44
PAGE 45
PAGE 46
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.