Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsPMICsLMZ30606RKGT

100

0 1 2 3 4 5 6

Output Current (A)

Efficiency (%)

= 5.0 V, V

OUT

= 3.3 V, f

= 1 MHz

= 3.3 V, V

OUT

= 1.8 V, f

= 1 MHz

G000

VOUT

VIN

LMZ30606

SENSE+

VADJ

AGNDPGND

OUT

PWRGD

RT/CLK

INH/UVLO

SS/TR

STSEL

SET

OUT

LMZ30606

www.ti.com

SNVS995 –JULY 2013

6A SIMPLE SWITCHER

Power Module with 2.95V-6V Input in QFN Package

Check for Samples: LMZ30606

FEATURES

DESCRIPTION

• Complete Integrated Power Solution Allows

The LMZ30606 SIMPLE SWITCHER® power module

Small Footprint, Low-Profile Design

is an easy-to-use integrated power solution that

• 9mm x 11mm x 2.8mm package

combines a 6-A DC/DC converter with power

- Pin Compatible with LMZ30602 & LMZ30604

MOSFETs, a shielded inductor, and passives into a

• Efficiencies Up To 96%

low profile, QFN package. This total power solution

requires as few as 3 external components and

• Wide-Output Voltage Adjust

eliminates the loop compensation and magnetics part

0.8 V to 3.6 V, with ±1% Reference Accuracy

selection process.

• Adjustable Switching Frequency

The 9×11×2.8 mm QFN package is easy to solder

(500 kHz to 2 MHz)

onto a printed circuit board and allows a compact

• Synchronizes to an External Clock

point-of-load design with greater than 90% efficiency

• Adjustable Slow-Start

and excellent power dissipation with a thermal

impedance of 12°C/W junction to ambient. The

• Output Voltage Sequencing / Tracking

device delivers the full 6-A rated output current at

• Power Good Output

85°C ambient temperature without airflow.

• Programmable Undervoltage Lockout (UVLO)

The LMZ30606 offers the flexibility and the feature-

• Output Overcurrent Protection

set of a discrete point-of-load design and is ideal for

• Over Temperature Protection

powering performance DSPs and FPGAs. Advanced

packaging technology afford a robust and reliable

• Operating Temperature Range: –40°C to 85°C

power solution compatible with standard QFN

• Enhanced Thermal Performance: 12°C/W

mounting and testing techniques.

• Meets EN55022 Class B Emissions

- Integrated Shielded Inductor

SIMPLIFIED APPLICATION

APPLICATIONS

• Broadband and Communications

Infrastructure

• Automated Test and Medical Equipment

• Compact PCI / PCI Express / PXI Express

• DSP and FPGA Point of Load Applications

• High Density Distributed Power Systems

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2SIMPLE SWITCHER is a registered trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (28 pages)

PAGE 1
LMZ30606 www.ti.com SNVS995 – JULY 2013 6A SIMPLE SWITCHER® Power Module with 2.95V-6V Input in QFN Package Check for Samples: LMZ30606 FEATURES 1 • 2 • • • • • • • • • • • • • • Complete Integrated Power Solution Allows Small Footprint, Low-Profile Design 9mm x 11mm x 2.8mm package - Pin Compatible with LMZ30602 & LMZ30604 Efficiencies Up To 96% Wide-Output Voltage Adjust 0.8 V to 3.
PAGE 2
LMZ30606 SNVS995 – JULY 2013 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure.
PAGE 3
LMZ30606 www.ti.com SNVS995 – JULY 2013 ELECTRICAL CHARACTERISTICS Over -40°C to 85°C free-air temperature, VIN = 3.3 V, VOUT = 1.8 V, IOUT = 6A, CIN1 = 47 µF ceramic, CIN2 = 220 µF poly-tantalum, COUT1 = 47 µF ceramic, COUT2 = 100 µF poly-tantalum (unless otherwise noted) PARAMETER TEST CONDITIONS IOUT Output current TA = 85°C, natural convection VIN Input voltage range Over IOUT range UVLO VIN Undervoltage lockout VOUT(adj) VOUT Over IOUT range 0.
PAGE 4
LMZ30606 SNVS995 – JULY 2013 www.ti.com ELECTRICAL CHARACTERISTICS (continued) Over -40°C to 85°C free-air temperature, VIN = 3.3 V, VOUT = 1.
PAGE 5
LMZ30606 www.ti.com SNVS995 – JULY 2013 PIN DESCRIPTIONS TERMINAL NAME DESCRIPTION NO. 1 5 AGND 29 33 Zero VDC reference for the analog control circuitry. These pins should be connected directly to the PCB analog ground plane. Not all pins are connected together internally. All pins must be connected together externally with a copper plane or pour directly under the module. Connect the AGND copper area to the PGND copper area at a single point; directly at the pin 37 PowerPAD using multiple vias.
PAGE 6
LMZ30606 SNVS995 – JULY 2013 www.ti.
PAGE 7
LMZ30606 www.ti.com SNVS995 – JULY 2013 TYPICAL CHARACTERISTICS (VIN = 5 V) 15 100 VOUT = 3.3 V, fSW = 1 MHz VOUT = 2.5 V, fSW = 1 MHz VOUT = 1.8 V, fSW = 1 MHz VOUT = 1.2 V, fSW = 750 kHz VOUT = 0.8 V, fSW = 650 kHz Output Voltage Ripple (mV) 95 Efficiency (%) 90 85 80 75 70 VOUT = 3.3 V, fSW = 1 MHz VOUT = 2.5 V, fSW = 1 MHz VOUT = 1.8 V, fSW = 1 MHz VOUT = 1.2 V, fSW = 750 kHz VOUT = 0.
PAGE 8
LMZ30606 SNVS995 – JULY 2013 www.ti.com TYPICAL CHARACTERISTICS (VIN = 3.3 V) 12 100 VOUT = 1.8 V, fSW = 1 MHz VOUT = 1.2 V, fSW = 750 kHz VOUT = 0.8 V, fSW = 650 kHz Output Voltage Ripple (mV) 95 Efficiency (%) 90 85 80 75 70 65 VOUT = 1.8 V, fSW = 1 MHz VOUT = 1.2 V, fSW = 750 kHz VOUT = 0.8 V, fSW = 650 kHz 60 55 50 0 1 2 3 4 Output Current (A) 5 11 10 9 8 7 6 0 1 2 G000 Figure 6. Efficiency vs. Output Current 3 4 Output Current (A) 6 G000 90 VOUT = 1.
PAGE 9
LMZ30606 www.ti.com SNVS995 – JULY 2013 APPLICATION INFORMATION ADJUSTING THE OUTPUT VOLTAGE The VADJ control sets the output voltage of the LMZ30606. The output voltage adjustment range is from 0.8V to 3.6V. The adjustment method requires the addition of RSET, which sets the output voltage, the connection of SENSE+ to VOUT, and in some cases RRT which sets the switching frequency. The RSET resistor must be connected directly between the VADJ (pin 35) and AGND (pin 33 & 34).
PAGE 10
LMZ30606 SNVS995 – JULY 2013 www.ti.com CAPACITOR RECOMMENDATIONS FOR THE LMZ30606 POWER SUPPLY Capacitor Technologies Electrolytic, Polymer-Electrolytic Capacitors When using electrolytic capacitors, high-quality, computer-grade electrolytic capacitors are recommended. Polymer-electrolytic type capacitors are recommended for applications where the ambient operating temperature is less than 0°C.
PAGE 11
LMZ30606 www.ti.com SNVS995 – JULY 2013 Table 4. Recommended Input/Output Capacitors (1) CAPACITOR CHARACTERISTICS VENDOR SERIES PART NUMBER WORKING VOLTAGE (V) CAPACITANCE (µF) ESR (2) (mΩ) Murata X5R GRM32ER61C476K 16 47 2 TDK X5R C3225X5R0J107M 6.3 100 2 Murata X5R GRM32ER60J107M 6.3 100 2 TDK X5R C3225X5R0J476K 6.3 47 2 Murata X5R GRM32ER60J476M 6.
PAGE 12
LMZ30606 SNVS995 – JULY 2013 www.ti.com Transient Waveforms 12 Figure 11. VIN = 5V, VOUT = 0.8V, 2A Load Step Figure 12. VIN = 3.3V, VOUT = 0.8V, 2A Load Step Figure 13. VIN = 5V, VOUT = 1.2V, 2A Load Step Figure 14. VIN = 3.3V, VOUT = 1.
PAGE 13
LMZ30606 www.ti.com SNVS995 – JULY 2013 Figure 15. VIN = 5V, VOUT = 1.8V, 2A Load Step Figure 16. VIN = 3.3V, VOUT = 1.8V, 2A Load Step Figure 17. VIN = 5V, VOUT = 2.5V, 2A Load Step Figure 18. VIN = 5V, VOUT = 3.
PAGE 14
LMZ30606 SNVS995 – JULY 2013 www.ti.com Application Schematics VIN 2.95 V to 6 V VIN + CIN2 220 F LMZ30606 PWRGD CIN1 47 F VOUT 1.2 V SENSE+ VOUT INH/UVLO COUT1 + 47 F COUT2 100 F RT/CLK RRT 715 k SS/TR VADJ STSEL PGND AGND RSET 2.87 k Figure 19. Typical Schematic VIN = 2.95 V to 6.0 V, VOUT = 1.2 V VIN 4.4 V to 6 V VIN + CIN2 220 F LMZ30606 PWRGD CIN1 47 F VOUT 3.3 V SENSE+ VOUT INH/UVLO COUT1 47 F COUT2 47 F RT/CLK RRT 348 k SS/TR VADJ STSEL PGND AGND RSET 459 Figure 20.
PAGE 15
LMZ30606 www.ti.com SNVS995 – JULY 2013 Power Good (PWRGD) The PWRGD pin is an open drain output. Once the voltage on the SENSE+ pin is between 93% and 107% of the set voltage, the PWRGD pin pull-down is released and the pin floats. The recommended pull-up resistor value is between 10 kΩ and 100 kΩ to a voltage source that is 6 V or less. The PWRGD pin is in a defined state once VIN is greater than 1.2 V, but with reduced current sinking capability.
PAGE 16
LMZ30606 SNVS995 – JULY 2013 www.ti.com Output On/Off Inhibit (INH) The INH pin provides electrical on/off control of the device. Once the INH pin voltage exceeds the threshold voltage, the device starts operation. If the INH pin voltage is pulled below the threshold voltage, the regulator stops switching and enters low quiescent current state. The INH pin has an internal pull-up current source, allowing the user to float the INH pin for enabling the device.
PAGE 17
LMZ30606 www.ti.com SNVS995 – JULY 2013 Slow Start (SS/TR) Connecting the STSEL pin to AGND and leaving SS/TR pin open enables the internal SS capacitor with a slow start interval of approximately 1.1 ms. Adding additional capacitance between the SS pin and AGND increases the slow start time. Table 6 shows an additional SS capacitor connected to the SS/TR pin and the STSEL pin connected to AGND. See Table 6 below for SS capacitor values and timing interval.
PAGE 18
LMZ30606 SNVS995 – JULY 2013 www.ti.com Synchronization (CLK) An internal phase locked loop (PLL) has been implemented to allow synchronization between 500 kHz and 2 MHz, and to easily switch from RT mode to CLK mode. To implement the synchronization feature, connect a square wave clock signal to the RT/CLK pin with a minimum pulse width of 75 ns. The maximum clock pulse width must be calculated using Equation 2. The clock signal amplitude must transition lower than 0.4 V and higher than 2.2 V.
PAGE 19
LMZ30606 www.ti.com SNVS995 – JULY 2013 Sequencing (SS/TR) Many of the common power supply sequencing methods can be implemented using the SS/TR, INH and PWRGD pins. The sequential method is illustrated in Figure 29 using two LMZ30606 devices. The PWRGD pin of the first device is coupled to the INH pin of the second device which enables the second power supply once the primary supply reaches regulation. Figure 30 shows sequential turn-on waveforms of two LMZ30606 devices.
PAGE 20
LMZ30606 SNVS995 – JULY 2013 www.ti.com Programmable Undervoltage Lockout (UVLO) The LMZ30606 implements internal UVLO circuitry on the VIN pin. The device is disabled when the VIN pin voltage falls below the internal VIN UVLO threshold. The internal VIN UVLO rising threshold is 3.135 V(max) with a typical hysteresis of 300 mV. If an application requires a higher UVLO threshold on the VIN pin, the UVLO pin can be configured as shown in Figure 33.
PAGE 21
LMZ30606 www.ti.com SNVS995 – JULY 2013 Layout Considerations To achieve optimal electrical and thermal performance, an optimized PCB layout is required. Figure 36, shows a typical PCB layout. Some considerations for an optimized layout are: • Use large copper areas for power planes (VIN, VOUT, and PGND) to minimize conduction loss and thermal stress. • Place ceramic input and output capacitors close to the module pins to minimize high frequency noise.
PAGE 22
PACKAGE OPTION ADDENDUM www.ti.
PAGE 23
PACKAGE OPTION ADDENDUM www.ti.com 20-Feb-2014 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
PAGE 24
PAGE 25
PAGE 26
PAGE 27
PAGE 28
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.