Datasheet
V
IN
V
EN
GND
V
OUT
OUTPUT
0.47 PF
0.47 PF
INPUT
ENABLE
GND
LP5900
LP5900
www.ti.com
SNVS358O –JULY 2005–REVISED MAY 2013
LP5900 Ultra Low Noise, 150 mA Linear Regulator for RF/Analog Circuits Requires No
Bypass Capacitor
Check for Samples: LP5900
1
FEATURES
PACKAGE
2
• Stable with 0.47 μF Ceramic Input and Output
• 4-Bump DSBGA (YZR), 1.057 mm x 1.083 mm x
Capacitors 0.600 mm
(lead free)
• No Noise Bypass Capacitor Required
• Extreme Thin 4-Bump DSBGA (YPF), 1.067 mm
• Logic Controlled Enable
x 1.092 mm x 0.250 mm
• Thermal-Overload and Short-Circuit Protection
(lead free)
• −40°C to +125°C Junction Temperature Range
• 6-Pin WSON, 2.2 mm x 2.5 mm x 0.8 mm
for Operation
(SC70 footprint, halogen free)
KEY SPECIFICATIONS
APPLICATIONS
• Input Voltage Range, 2.5V to 5.5V
• Cellular Phones
• Output Voltage Range, 1.5V to 4.5V
• PDA Handsets
• Output Current, 150 mA
• Wireless LAN Devices
• Low Output Voltage Noise, 6.5 μV
RMS
• PSRR, 75 dB at 1 kHz
DESCRIPTION
• Output Voltage Tolerance, ± 2%
The LP5900 is a linear regulator capable of supplying
150 mA output current. Designed to meet the
• Virturally Zero I
Q
(Disabled), <1 µA
requirements of RF/Analog circuits, the LP5900
• Very Low I
Q
(Enabled), 25 μA
device provides low noise, high PSRR, low quiescent
• Startup Time, 150 μs
current, and low line transient response figures. Using
new innovative design techniques the LP5900 offers
• Low Dropout, 80 mV Typ.
class-leading device noise performance without a
noise bypass capacitor.
Typical Application Circuit
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.