Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - transceivers RS232 4/5 SSOP 28

www.ti.com

FEATURES

DB, DW, OR PW PACKAGE

(TOP VIEW)

DOUT3

DOUT1

DOUT2

RIN2

ROUT2

DIN2

DIN1

ROUT1

RIN1

GND

C1+

V+

C1–

DOUT4

RIN3

ROUT3

SHDN

RIN4

ROUT4

DIN4

DIN3

ROUT5

RIN5

V–

C2–

C2+

APPLICATIONS

DESCRIPTION/ ORDER INFORMATION

MAX213

5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER

WITH ± 15-kV ESD PROTECTION

SLLS680 – DECEMBER 2005

• ESD Protection for RS-232 Bus Pins

– ± 15-kV Human-Body Model (HBM)

• Meets or Exceeds the Requirements of

TIA/EIA-232-F and ITU v.28 Standards

• Operates at 5-V V

Supply

• Four Drivers and Five Receivers

• Operates up to 120 kbit/s

• Low Supply Current in Shutdown

Mode . . . 15 µ A Typ

• External Capacitors . . . 4 × 0.1 F

• Designed to Be Interchangeable With Maxim

MAX213

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• Battery-Powered Systems

• PDAs

• Notebooks

• Laptops

• Palmtop PCs

• Hand-Held Equipment

The MAX213 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with ± 15-kV

ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of

TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the

serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V

supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/ µ s driver output

slew rate.

The MAX213 has an active-low shutdown ( SHDN) and an active-high enable control (EN). In shutdown mode,

the charge pumps are turned off, V+ is pulled down to V

, V– is pulled to GND, and the transmitter outputs are

disabled. This reduces supply current typically to 1 µ A. Two receivers of the MAX213 are active during

shutdown.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (17 pages)

PAGE 1
www.ti.com FEATURES • • • • • • • • • ESD Protection for RS-232 Bus Pins – ±15-kV Human-Body Model (HBM) Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards Operates at 5-V VCC Supply Four Drivers and Five Receivers Operates up to 120 kbit/s Low Supply Current in Shutdown Mode . . . 15 µA Typ External Capacitors . . . 4 × 0.
PAGE 2
MAX213 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION www.ti.
PAGE 3
MAX213 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION www.ti.
PAGE 4
MAX213 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION www.ti.com SLLS680 – DECEMBER 2005 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) VCC Supply voltage range V+ Positive charge-pump voltage range (2) V– Negative charge-pump voltage range (2) VI Input voltage range VO Output voltage range DOUT Short-circuit duration θJA Package thermal impedance (3) (4) Drivers MIN MAX –0.3 6 V VCC – 0.3 14 V 0.
PAGE 5
MAX213 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION www.ti.
PAGE 6
MAX213 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION www.ti.com SLLS680 – DECEMBER 2005 RECEIVER SECTION Electrical Characteristics (1) over operating free-air temperature range (unless otherwise noted) (see Figure 6) PARAMETER TEST CONDITIONS VOH High-level output voltage IOH = –1 mA VOL Low-level output voltage IOH = 1.6 mA TYP (2) MAX VCC – 0.4 Active mode 1.7 2.4 Shutdown mode (R4–R5) 1.5 2.
PAGE 7
MAX213 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION www.ti.com SLLS680 – DECEMBER 2005 PARAMETER MEASUREMENT INFORMATION 0.1 F – + ISHDN 5.5 V 0.1 F + – VCC V+ C1+ 0.1 F + – V– 0.1 F – + C1– C2+ 0.1 F + – C2– VCC 400 kΩ 5.5 V DOUT DIN D1−D4 RIN ROUT 0-V or 5.5-V Drive 5.5 V 3 kΩ 5.5 V EN 5 kΩ R1−R5 SHDN GND Figure 1.
PAGE 8
MAX213 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION www.ti.com SLLS680 – DECEMBER 2005 PARAMETER MEASUREMENT INFORMATION (continued) 5-V SHDN Input Generator (see Note B) RS-232 Output 3V 1.5 V 1.5 V 0V 50 Ω RL tTHL(D) CL (see Note A) Output tTLH(D) –3 V TEST CIRCUIT SR(tr) = 6V tTHL(D) or tTLH(D) VOH 3V –3 V 3V VOL VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B.
PAGE 9
MAX213 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION www.ti.com SLLS680 – DECEMBER 2005 PARAMETER MEASUREMENT INFORMATION (continued) 3V 5-V SHDN VCC S1 GND 1.5 V 0V tPZH (S1 at GND) tPHZ (S1 at GND) RL 3 V or 0 V 1.5 V Input Output Output VOH 3.5 V VOH – 0.1 V CL (see Note A) EN Generator (see Note B) 50 Ω tPZL (S1 at VCC) tPLZ (S1 at VCC) VOL + 0.1 V 0.8 V Output TEST CIRCUIT NOTES: A. B. C. D. VOL VOLTAGE WAVEFORMS CL includes probe and jig capacitance.
PAGE 10
MAX213 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION www.ti.com SLLS680 – DECEMBER 2005 APPLICATION INFORMATION DOUT3 DOUT1 DOUT2 RIN2 1 28 2 27 3 RIN3 5 kΩ 4 26 5 kΩ ROUT2 DOUT4 25 ROUT3 SHDN = 5 V 24 5 EN 23 5V RIN4 5 kΩ 400 kΩ DIN2 6 22 ROUT4 5V 400 kΩ DIN1 ROUT1 RIN1 GND 5V 7 400 kΩ 21 8 9 DIN4 5V 10 5 kΩ 400 kΩ 20 – DIN3 CBYPASS = 0.1 F + 11 VCC C3(1) = – 0.1 F 6.3 V + 18 12 13 C1 = 0.1 F 6.3 V 19 VCC C1+ C4 = 0.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.com 31-Oct-2013 (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device MAX213CDBR Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SSOP DB 28 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 MAX213CDWR SOIC DW 28 1000 330.0 32.4 11.35 18.67 3.1 16.0 32.0 Q1 MAX213IDBR SSOP DB 28 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.
PAGE 14
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) MAX213CDBR SSOP DB 28 2000 367.0 367.0 38.0 MAX213CDWR SOIC DW 28 1000 367.0 367.0 55.0 MAX213IDBR SSOP DB 28 2000 367.0 367.0 38.0 MAX213IDWR SOIC DW 28 1000 367.0 367.0 55.
PAGE 15
PAGE 16
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 17
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.