CCD Camera User's Guide MC-780PIx

3-1

Using the External SYNC Mode

The camera can be synchronized externally by inputting an external sync sig-

nal. When using external sync, set the clock board’s sync signal input/output

switch (SW1) to the external sync signal in (upper switch position) and

switches 3 and 4 to the mode switch (SW3), located on the rear panel, to ON.

Topic Page

3.1 External Sync With Interface 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 External Sync With No Interface 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 3