Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - receivers RS422, RS423 0/4 SOIC 16 N

MC3486

QUADRUPLE DIFFERENTIAL LINE RECEIVER

WITH 3-STATE OUTPUTS

SLLS097C – JUNE 1980 – REVISED FEBRUARY 2002

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Meets or Exceeds the Requirements of

ANSI Standards EIA/TIA-422-B and

EIA/TIA-423-B and ITU Recommendations

V.10 and V.11

3-State, TTL-Compatible Outputs

Fast Transition Times

Operates From Single 5-V Supply

Designed to Be Interchangeable With

Motorola MC3486

description

The MC3486 is a monolithic quadruple differential line receiver designed to meet the specifications of ANSI

Standards TIA/EIA-422-B and TIA/EIA-423-B and ITU Recommendations V.10 and V.11. The MC3486 offers

four independent differential-input line receivers that have TTL-compatible outputs. The outputs utilize 3-state

circuitry to provide a high-impedance state at any output when the appropriate output enable is at a low logic

level.

The MC3486 is designed for optimum performance when used with the MC3487 quadruple differential line

driver. It is supplied in a 16-pin package and operates from a single 5-V supply.

The MC3486 is characterized for operation from 0°C to 70°C.

AVAILABLE OPTIONS

PACKAGED DEVICES

PLASTIC

SMALL OUTLINE

(D, NS)

PLASTIC

DIP

(N)

0°C to 70°C

MC3486D

MC3486NS

MC3486N

The D package is available taped and reeled. Add the suffix R

to the device type (e.g., MC3486DR). The NS package is only

available taped and reeled.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Motorola is a trademark of Motorola, Incorporated.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

1,2EN

GND

3,4EN

D, N, OR NS PACKAGE

(TOP VIEW)

Summary of content (16 pages)

PAGE 1
MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C – JUNE 1980 – REVISED FEBRUARY 2002 D D D D D D, N, OR NS PACKAGE (TOP VIEW) Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.
PAGE 2
MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C – JUNE 1980 – REVISED FEBRUARY 2002 FUNCTION TABLE (each receiver) DIFFERENTIAL INPUTS A–B ENABLE OUTPUT Y VID ≤ 0.2 V – 0.2 V < VID < 0.2 V H H H ? VID ≤ – 0.
PAGE 3
MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C – JUNE 1980 – REVISED FEBRUARY 2002 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 V Input voltage, VI (A or B inputs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C – JUNE 1980 – REVISED FEBRUARY 2002 electrical characteristics over recommended ranges of common-mode input voltage, supply voltage, and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS VIT + VIT – Differential input high-threshold voltage Differential input low-threshold voltage VO = 2.7 V, VO = 0.
PAGE 5
MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C – JUNE 1980 – REVISED FEBRUARY 2002 PARAMETER MEASUREMENT INFORMATION 500 Ω VID 500 Ω VOH IOH (–) IOL (+) VOL 2V Figure 1. VOH, VOL 3V Generator (see Note A) Output 51 Ω Input 1.5 V 1.5 V 0V CL = 15 pF (see Note B) tPLH tPHL VOH 1.5 V 1.3 V Output 1.3 V 2V VOL TEST CIRCUIT VOLTAGE WAVEFORMS NOTES: A.
PAGE 6
MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C – JUNE 1980 – REVISED FEBRUARY 2002 PARAMETER MEASUREMENT INFORMATION – 1.5 V 1.5 V SW1 Output SW2 2 kΩ 5 kΩ See Note C CL = 15 pF (see Note B) Generator (see Note A) 5V SW3 51 Ω TEST CIRCUIT tPZH Input SW1 to 1.5 V 1.5 V SW2 Open SW3 Closed 0V 1.5 V Input VOH 1.5 V tPZL 4.5 V Output 1.5 V VOL 1.3 V tPHZ tPLZ 3V Input 0V SW1 to 1.5 V SW2 Closed SW3 Closed 1.5 V Input 0V tPHZ 3V SW1 to – 1.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant MC3486DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 MC3486NSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.
PAGE 10
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) MC3486DR MC3486NSR SOIC D 16 2500 333.2 345.9 28.6 SO NS 16 2000 367.0 367.0 38.
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.