Computer Accessories User Manual
3-1
Digital Interface
Digital Interface
The Modular MSOP8 EVM is designed for easy interfacing to multiple control
platforms. Samtec part numbers, SSW-110-22-F-D-VS-K and
TSM-110-01-T-DV-P, provide a convenient 10-pin dual row header/socket
combination at J2. This header/socket provides access to the digital control
and serial data pins of the MSOP8 EVM. Consult Samtec at www.samtec.com
or 1-800-SAMTEC-9 for a variety of mating connector options.
Table 3-1.Digital Interface Pin Out
Pin Number Signal Description
J2.1 CS Chip Select – Active low signal, enables data transfer – jumper configurable
(see schematic)
J2.3 SCLK Serial Clock
J2.5 SCLKR Serial Clock Return (for DSP Host systems)
J2.7 FS Frame Sync for DSP host systems – alternate Chip Select through JMP2 (see
schematic)
J2.9 FSR Frame Sync Return (for DSP Host systems)
J2.11 Unused
J2.13 SDO Serial Data Output
J2.15 Unused
J2.17 Unused
J2.19 SPARE
Chapter 3