User manual

www.ti.com

Software Examples

3.2 Development Environment Requirements

To use any of the below software examples with the MSP430FR5969 LaunchPad, you must have an

integrated development environment (IDE) that supports the MSP430FR5969 device.

Table 6. IDE Minimum Requirements for MSP430FR5969

Code Composer Studio™ IDE IAR Embedded Workbench™ IDE

CCS v5.5 or later IAR EW430 v5.60 or later

For more details on where to download the latest IDE, see Section 4.3.

3.2.1 Pre-Compiled Binary

The /Binary/ folder inside the software zip package includes pre-compiled TI-TXT binary files for each of

the above projects that are ready to be flashed onto the LaunchPad. A copy of the MSP430Flasher tool is

also shipped to interface with the eZ-FET Emulator.

To quickly program a demo onto the LaunchPad, simply navigate into the corresponding demo project's

directory and double click the "Program <Example>.bat" file.

Figure 16. Program <Example>.bat

If desired, the "Program <Example>.bat" file can be modified to point to your own project's binary file.

NOTE: After importing and compiling the software source code in an IDE such as CCS or IAR, the

TI-TXT binary files located in the /Binary/ folder will not be updated automatically. You must

copy your newly compiled binary from your IDE's /Workspace/Project/ directory and replace

the "<Example>.txt" in /Binary/ for the batch file to program your own binary file.

SLAU535A–February 2014–Revised June 2014 MSP-EXP430FR5969 LaunchPad™ Development Kit User's Guide

Submit Documentation Feedback