User manual

www.ti.com

Software Examples

Figure 13. Out-of-Box GUI Running From TI Cloud Tools

Click on the Connect button to connect to the LaunchPad then open the serial COM port. Once the

connection has been established and the GUI indicates, “Target Status: Running…,” you can use the color

wheel or the Red, Green, and Blue color sliders to set the color of the LaunchPad RGB LED. Changing

the LED Beats Per Minute input box sets the RGB LED blink rate.

3.2 CC3100BOOST MQTT-Twitter LED Control Example

This section describes the functionality and structure of the CC3100BOOST MQTT-Twitter LED Control

demo that is included in the MSP‑EXP432P401R Software Examples download, or more easily accessible

through MSPWare (See 4.3).

Note: This CC3100BOOST MQTT-Twitter LED Control demo requires the CC3100BOOST BoosterPack

to function properly.

This demo uses the MQTT connectivity protocol to realize a simple Internet-of-Things application that

allows user to control MSP432 LaunchPad RGB LED wirelessly via Twitter tweets.

SLAU597–March 2015 MSP

‑

EXP432P401R LaunchPad™ Evaluation Kit

Submit Documentation Feedback