Datasheet

MSP430FR573x
MSP430FR572x
www.ti.com SLAS639H –JULY 2011–REVISED SEPTEMBER 2013
Mixed Signal Microcontroller
1
FEATURES
23
• Embedded Microcontroller
• Enhanced Serial Communication
– 16-Bit RISC Architecture up to 24-MHz – eUSCI_A0 and eUSCI_A1 Support:
Clock
– UART With Automatic Baud-Rate
– Wide Supply Voltage Range (2 V to 3.6 V) Detection
– -40°C to 85°C Operation – IrDA Encode and Decode
• Optimized Ultralow-Power Modes – SPI at Rates up to 10 Mbps
– eUSCI_B0 Supports:
Consumption
Mode
– I
2
C With Multiple Slave Addressing
(Typical)
– SPI at Rates up to 10 Mbps
Active Mode 81.4 µA/MHz
Standby (LPM3 With VLO) 6.3 µA
– Hardware UART Bootstrap Loader (BSL)
Real-Time Clock (LPM3.5 With Crystal) 1.5 µA
• Power Management System
Shutdown (LPM4.5) 0.32 µA
– Fully Integrated LDO
– Supply Voltage Supervisor for Core and
• Ultralow-Power Ferroelectric RAM
Supply Voltages With Reset Capability
– Up to 16KB Nonvolatile Memory
– Always-On Zero-Power Brownout Detection
– Ultralow-Power Writes
– Serial On-Board Programming With No
– Fast Write at 125 ns per Word (16KB in
External Voltage Needed
1 ms)
• Flexible Clock System
– Built in Error Coding and Correction (ECC)
– Fixed-Frequency DCO With Six Selectable
and Memory Protection Unit (MPU)
Factory-Trimmed Frequencies (Device
– Universal Memory = Program + Data +
Dependent)
Storage
– Low-Power Low-Frequency Internal Clock
– 10
15
Write Cycle Endurance
Source (VLO)
– Radiation Resistant and Nonmagnetic
– 32-kHz Crystals (LFXT)
• Intelligent Digital Peripherals
– High-Frequency Crystals (HFXT)
– 32-Bit Hardware Multiplier (MPY)
• Development Tools and Software
– Three-Channel Internal DMA
– Free Professional Development
– Real-Time Clock (RTC) With Calendar and
Environment ( Code Composer Studio™)
Alarm Functions
– Low-Cost Full-Featured Kit (MSP-
– Five 16-Bit Timers With up to Three
EXP430FR5739)
Capture/Compare
– Full Development Kit (MSP-FET430U40A)
– 16-Bit Cyclic Redundancy Checker (CRC)
– Target Board (MSP-TS430RHA40A)
• High-Performance Analog
• Family Members
– 16-Channel Analog Comparator With
– 20 Different Variants and 5 Available
Voltage Reference and Programmable
Packages Summarized in Table 1
Hysteresis
– For Complete Module Descriptions, See the
– 14-Channel 10-Bit Analog-to-Digital
MSP430FR57xx Family User's Guide
Converter (ADC) With Internal Reference
(SLAU272)
and Sample-and-Hold
– 200 ksps at 100-µA Consumption
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2Code Composer Studio, MSP430 are trademarks of Texas Instruments.
3All other trademarks are the property of their respective owners.
UNLESS OTHERWISE NOTED this document contains
Copyright © 2011–2013, Texas Instruments Incorporated
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.