Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Amplifier - Video buffering Rail-to-rail 450 MHz VSSOP 10

OPA355

OPA2355

OPA3355

SBOS195D – MARCH 2001 – REVISED JANUARY 2004

www.ti.com

DESCRIPTION

The OPA355 series high-speed, voltage-feedback CMOS

operational amplifiers are designed for video and other

applications requiring wide bandwidth. The OPA355 is unity-

gain stable and can drive large output currents. In addition,

the OPA355 has a digital shutdown (Enable) function. This

feature provides power savings during idle periods and

places the output in a high-impedance state to support output

multiplexing. Differential gain is 0.02% and differential phase

is 0.05°. Quiescent current is only 8.3mA per channel.

The OPA355 is optimized for operation on single or dual

supplies as low as 2.5V (±1.25V) and up to 5.5V (±2.75V).

Common-mode input range for the OPA355 extends 100mV

below ground and up to 1.5V from V+. The output swing is

within 100mV of the rails, supporting wide dynamic range.

The OPA355 series is available in single (SOT23-6 and

SO-8), dual (MSOP-10), and triple (TSSOP-14 and SO-14)

versions. Multichannel versions feature completely indepen-

dent circuitry for lowest crosstalk and freedom from interac-

tion. All are specified over the extended –40°C to +125°C

range.

FEATURES

● UNITY-GAIN BANDWIDTH: 450MHz

● WIDE BANDWIDTH: 200MHz GBW

● HIGH SLEW RATE: 360V/µs

● LOW NOISE: 5.8nV/

√Hz

● EXCELLENT VIDEO PERFORMANCE:

DIFF GAIN: 0.02%, DIFF PHASE: 0.05°

0.1dB GAIN FLATNESS: 75MHz

● INPUT RANGE INCLUDES GROUND

● RAIL-TO-RAIL OUTPUT (within 100mV)

● LOW INPUT BIAS CURRENT: 3pA

● LOW SHUTDOWN CURRENT: 3.4µA

● ENABLE/DISABLE TIME: 100ns/30ns

● THERMAL SHUTDOWN

● SINGLE-SUPPLY OPERATING RANGE: 2.5V to 5.5V

●

Micro

SIZE PACKAGES

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

200MHz, CMOS

OPERATIONAL AMPLIFIER WITH SHUTDOWN

APPLICATIONS

● VIDEO PROCESSING

● ULTRASOUND

● OPTICAL NETWORKING, TUNABLE LASERS

● PHOTODIODE TRANSIMPEDANCE AMPS

● ACTIVE FILTERS

● HIGH-SPEED INTEGRATORS

● ANALOG-TO-DIGITAL (A/D) CONVERTER

INPUT BUFFERS

● DIGITAL-TO-ANALOG (D/A) CONVERTER

OUTPUT AMPLIFIERS

● BARCODE SCANNERS

● COMMUNICATIONS

OPA355 RELATED PRODUCTS

FEATURES PRODUCT

200MHz, Rail-to-Rail Output, CMOS, No Shutdown OPA356

38MHz, Rail-to-Rail Input/Output, CMOS OPAx350

75MHz, Rail-to-Rail Output OPAx631

150MHz, Rail-to-Rail Output OPAx634

Differential Input/Output, 3.3V Supply THS412x

OPA355

Out

V+

V– Enable

–V

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

All trademarks are the property of their respective owners.

Summary of content (27 pages)

PAGE 1
OPA355 OPA2355 OPA3355 OPA 355 OPA2 355 OPA 335 5 ® OPA 33 5 5 SBOS195D – MARCH 2001 – REVISED JANUARY 2004 200MHz, CMOS OPERATIONAL AMPLIFIER WITH SHUTDOWN FEATURES DESCRIPTION ● ● ● ● ● The OPA355 series high-speed, voltage-feedback CMOS operational amplifiers are designed for video and other applications requiring wide bandwidth. The OPA355 is unitygain stable and can drive large output currents. In addition, the OPA355 has a digital shutdown (Enable) function.
PAGE 2
ABSOLUTE MAXIMUM RATINGS(1) Supply Voltage, V+ to V– ................................................................... 7.5V Signal Input Terminals, Voltage(2) .................... (V–) – 0.5V to (V+) + 0.5V Current(2) ..................................................... 10mA Enable Input ...................................................... (V–) – 0.5V to (V+) + 0.5V Output Short-Circuit(3) .............................................................. Continuous Operating Temperature ..................
PAGE 3
ELECTRICAL CHARACTERISTICS: VS = +2.7V to +5.5V Single-Supply Boldface limits apply over the specified temperature range, TA = –40°C to +125°C. At TA = +25°C, RF = 604Ω, RL = 150Ω, and connected to VS/2, unless otherwise noted.
PAGE 4
ELECTRICAL CHARACTERISTICS: VS = +2.7V to +5.5V Single-Supply (Cont.) Boldface limits apply over the specified temperature range, TA = –40°C to +125°C. At TA = +25°C, RF = 604Ω, RL = 150Ω, and connected to VS/2, unless otherwise noted. PARAMETER CONDITION MIN OPA355 OPA2355 OPA3355 TYP MAX UNITS 0.8 V SHUTDOWN Disabled (Logic-LOW Threshold)(2) Enabled (Logic-HIGH Threshold)(2) 2 Enable Time V 100 Disable Time ns 30 Shutdown Current (per amplifier) VS = +5V, Disabled 3.
PAGE 5
TYPICAL CHARACTERISTICS At TA = +25°C, VS = 5V, G = +2, RF = 604Ω, and RL = 150Ω connected to VS/2, unless otherwise noted. NONINVERTING SMALL-SIGNAL FREQUENCY RESPONSE INVERTING SMALL-SIGNAL FREQUENCY RESPONSE 6 3 VO = 0.1Vp-p 0 Normalized Gain (dB) 3 Normalized Gain (dB) VO = 0.1Vp-p G = +1 RF = 0 0 –3 G = +2 –6 G = +5 –9 G = +10 1M 10M Frequency (Hz) –3 G = –5 –6 G = –10 –9 100M –15 100k 1G NON-INVERTING SMALL-SIGNAL STEP RESPONSE 0.1dB GAIN FLATNESS FOR VARIOUS RF 0.5 4.5 2.5 1.
PAGE 6
TYPICAL CHARACTERISTICS (Cont.) At TA = +25°C, VS = 5V, G = +2, RF = 604Ω, and RL = 150Ω connected to VS/2, unless otherwise noted.
PAGE 7
TYPICAL CHARACTERISTICS (Cont.) At TA = +25°C, VS = 5V, G = +2, RF = 604Ω, and RL = 150Ω connected to VS/2, unless otherwise noted. FREQUENCY RESPONSE FOR VARIOUS RL FREQUENCY RESPONSE FOR VARIOUS CL 3 9 RL = 10kΩ 6 Normalized Gain (dB) Normalized Gain (dB) 0 CL = 0pF VO = 0.1Vp-p –3 RL = 50Ω –6 RL = 150Ω –9 RL = 1kΩ –12 0 –3 CL = 5.
PAGE 8
TYPICAL CHARACTERISTICS (Cont.) At TA = +25°C, VS = 5V, G = +2, RF = 604Ω, and RL = 150Ω connected to VS/2, unless otherwise noted. COMPOSITE VIDEO DIFFERENTIAL GAIN AND PHASE INPUT BIAS CURRENT vs TEMPERATURE 0.40 10n Input Bias Current (pA) dG/dP (%/degrees) 0.35 0.30 0.25 0.20 dP 0.15 0.10 1n 100 10 dG 0.
PAGE 9
TYPICAL CHARACTERISTICS (Cont.) At TA = +25°C, VS = 5V, G = +2, RF = 604Ω, and RL = 150Ω connected to VS/2, unless otherwise noted. CLOSED-LOOP OUTPUT IMPEDANCE vs FREQUENCY MAXIMUM OUTPUT VOLTAGE vs FREQUENCY 100 6 10 5 Output Voltage (Vp-p) Output Impedance (Ω) VS = 5.5V 1 OPA355 0.1 ZO 604Ω 0.01 Maximum Output Voltage without Slew-Rate Induced Distortion 4 3 VS = 2.7V 2 1 604Ω 0.
PAGE 10
TYPICAL CHARACTERISTICS (Cont.) At TA = +25°C, VS = 5V, G = +2, RF = 604Ω, and RL = 150Ω connected to VS/2, unless otherwise noted. CHANNEL-TO-CHANNEL CROSSTALK Crosstalk, Input-Referred (dB) 0 –20 –40 OPA3355 (triple) –60 –80 OPA2355 (dual) –100 –120 100k 1M 10M 100M Frequency (Hz) APPLICATIONS INFORMATION The OPA355 series is a CMOS, high-speed, voltage-feedback, operational amplifier designed for video and other general-purpose applications.
PAGE 11
The Enable input can be modeled as a CMOS input gate with a 100kΩ pull-up resistor to V+. Left open, the Enable pin will assume a logic HIGH, and the amplifier will be on. driver. A properly back-terminated 75Ω cable does not appear as capacitance; it presents only a 150Ω resistive load to the OPA355 output. The Enable time is 100ns and the disable time is only 30ns. This allows the OPA355 to be operated as a “gated” amplifier, or to have its output multiplexed onto a common output bus.
PAGE 12
+2.5V + 49.9Ω Signal #1 1µF 10nF 1µF 10nF A OPA355 + –2.5V 1kΩ 49.9Ω VOUT 1kΩ 49.9Ω +2.5V + 49.9Ω Signal #2 1µF 10nF 1µF 10nF B OPA355 + –2.5V 1kΩ 1kΩ HCO4 BON Select AON FIGURE 2. Multiplexed Output. +V CC External Pin Internal Circuitry –V CC FIGURE 3. Internal ESD Protection. 12 OPA355, 2355, 3355 www.ti.
PAGE 13
PACKAGE OPTION ADDENDUM www.ti.
PAGE 14
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
PAGE 15
PACKAGE MATERIALS INFORMATION www.ti.com 19-Nov-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing OPA2355DGSA/250 VSSOP DGS 10 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 250 180.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 OPA3355EA/250 TSSOP PW 14 250 180.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 OPA3355EA/2K5 TSSOP PW 14 2500 330.0 12.4 6.9 5.6 1.6 8.0 12.
PAGE 16
PACKAGE MATERIALS INFORMATION www.ti.com 19-Nov-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) OPA2355DGSA/250 VSSOP DGS 10 250 210.0 185.0 35.0 OPA3355EA/250 TSSOP PW 14 250 210.0 185.0 35.0 OPA3355EA/2K5 TSSOP PW 14 2500 367.0 367.0 35.0 OPA355UA/2K5 SOIC D 8 2500 367.0 367.0 35.
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
PAGE 25
PAGE 26
PAGE 27
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.