Calculator User Manual

x
Flash Applications
Flash functionality enables the ability to download different
applications to a
TI
-
89 / TI
-
92 Plus
calculator from the enclosed
CD-ROM, the TI web site, or from another calculator.
Before downloading new applications to a
TI
-
89 / TI
-
92 Plus
, please
read and accept the license agreement on the
TI
-
89 / TI
-
92 Plus
Applications CD-ROM.
Before installing Flash applications, you will need:
• A computer with a CD-ROM drive and a serial port.
•
TI™ Connect
or
TI-GRAPH LINK™
software and a
TI-GRAPH LINK
cable. If you need the
TI Connect/ TI-GRAPH LINK
software or a
TI-GRAPH LINK
cable, check the TI web site at
education.ti.com
.
To set up:
1. Insert the small end of the
TI-GRAPH LINK
cable into the port at
the bottom of the
TI
-
89
or the top of the
TI
-
92 Plus
.
2. Connect the other end to the computer’s serial port using a
25-to-9 pin adapter if necessary.
To install an application:
1. Insert the
TI
-
89 / TI
-
92 Plus
Applications CD-ROM into the
computer’s CD-ROM drive.
2. From the computer, start the
TI-GRAPH LINK
software.
3. From the
Link
menu, click
Send Flash Software
8
Applications and
Certificates
.
4. Locate the Flash application on the CD-ROM and double-click.
The Flash application is copied to the calculator.
To run an application:
1. On the
TI
-
89 / TI
-
92 Plus
, press
¥
O to display the
FLASH
APPLICATIONS
menu.
2. Use the cursor keys
CD
to highlight the application and press
¸.
Applications
Hardware/Software
Requirements
Hardware Setup for
the Computer
Installing a Flash
Application from the
CD-ROM
Note: For further
information about
transmitting applications to
and from your computer
using TI Connect, refer to
the TI Connect online help.
Running a Flash
Application