Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Op-amp Multi-purpose PDIP 8

1OUT

1IN−

1IN+

−

2OUT

2IN−

2IN+

D, DGK, P, PS, OR PW PACKAGE

(TOP VIEW)

RC4558

www.ti.com

SLOS073F –MARCH 1976–REVISED SEPTEMBER 2010

DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER

Check for Samples: RC4558

FEATURES

• Continuous Short-Circuit Protection

• Wide Common-Mode and Differential Voltage

Ranges

• No Frequency Compensation Required

• Low Power Consumption

• No Latch-Up

• Unity-Gain Bandwidth . . . 3 MHz Typ

• Gain and Phase Match Between Amplifiers

• Low Noise . . . 8 nV/√Hz Typ at 1 kHz

DESCRIPTION/ORDERING INFORMATION

The RC4558 device is a dual general-purpose operational amplifier, with each half electrically similar to the

μA741, except that offset null capability is not provided.

The high common-mode input voltage range and the absence of latch-up make this amplifier ideal for

voltage-follower applications. The device is short-circuit protected, and the internal frequency compensation

ensures stability without external components.

Table 1. ORDERING INFORMATION

PACKAGE

(1)

ORDERABLE PART NUMBER TOP-SIDE MARKING

MSOP/VSSOP – DGK Reel of 2500 RC4558DGKR YR_

(2)

PDIP – P Tube of 50 RC4558P RC4558P

Tube of 75 RC4558D

SOIC – D RC4558

0°C to 70°C Reel of 2500 RC4558DRG3

SOP – PS Reel of 2000 RC4558PSR R4558

Tube of 150 RC4558PW

TSSOP – PW R4558

Reel of 2000 RC4558PWR

MSOP/VSSOP – DGK Reel of 2500 RC4558IDGKR YS_

(2)

PDIP – P Tube of 50 RC4558IP RC4558IP

Tube of 75 RC4558ID

–40°C to 85°C SOIC – D R4558I

Reel of 2500 RC4558IDR

Tube of 150 RC4558IPW

TSSOP – PW R4558I

Reel of 2000 RC4558IPWR

(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

(2) The actual top-side marking has one additional character that designates the assembly/test site.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (22 pages)

PAGE 1
RC4558 SLOS073F – MARCH 1976 – REVISED SEPTEMBER 2010 www.ti.com DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER Check for Samples: RC4558 FEATURES 1 • • • • • • • • D, DGK, P, PS, OR PW PACKAGE (TOP VIEW) Continuous Short-Circuit Protection Wide Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Unity-Gain Bandwidth . . . 3 MHz Typ Gain and Phase Match Between Amplifiers Low Noise . . .
PAGE 2
RC4558 SLOS073F – MARCH 1976 – REVISED SEPTEMBER 2010 www.ti.
PAGE 3
RC4558 SLOS073F – MARCH 1976 – REVISED SEPTEMBER 2010 www.ti.
PAGE 4
RC4558 SLOS073F – MARCH 1976 – REVISED SEPTEMBER 2010 www.ti.
PAGE 5
RC4558 SLOS073F – MARCH 1976 – REVISED SEPTEMBER 2010 www.ti.
PAGE 6
RC4558 SLOS073F – MARCH 1976 – REVISED SEPTEMBER 2010 www.ti.com TYPICAL CHARACTERISTICS (continued) OUTPUT VOLTAGE SWING vs FREQUENCY (VCC = ±15 V, RL = 2 kΩ, TA = 25°C) 15 30 10 25 VOM – Output Voltage Swing – V VOM – Output Voltage Swing – V OUTPUT VOLTAGE SWING vs SUPPLY VOLTAGE (RL = 2 kΩ, TA = 25°C) 5 0 -5 -10 -15 6 8 10 12 14 16 20 15 10 5 0 1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 10 100 10k 100k 1.
PAGE 7
RC4558 SLOS073F – MARCH 1976 – REVISED SEPTEMBER 2010 www.ti.com TYPICAL CHARACTERISTICS (continued) NEGATIVE OUTPUT VOLTAGE SWING vs TEMPERATURE (VCC = ±15 V, RL = 10 kΩ) OPEN LOOP GAIN vs FREQUENCY (VCC = ±15 V, RL = 2 kΩ, CL = 22 pF, TA = 25°C) 120 -12 110 100 -12.5 G M – Open Loop Gain – dB –V OM – Output Voltage Swing – V -12.25 -12.75 -13 -13.25 -13.5 90 80 70 60 50 40 30 20 -13.75 10 -14 -55 -35 -15 5 25 45 65 85 0 100 1.E+02 105 125 1k 1.E+03 10k 1.E+04 100k 1.E+05 1M 1.
PAGE 8
RC4558 SLOS073F – MARCH 1976 – REVISED SEPTEMBER 2010 www.ti.com TYPICAL CHARACTERISTICS (continued) INPUT NOISE VOLTAGE vs FREQUENCY (VCC = ±15 V, TA = 25°C) – Input NoiseVoltage Voltage––nV/rt(Hz) nV/ÖHz Vn V–n Input Noise 14 12 10 8 6 4 2 0 10 1.E+01 100 1.E+02 1k 1.E+03 10k 1.E+04 100k 1.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 15-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant RC4558DGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 RC4558DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 RC4558DRG3 SOIC D 8 2500 330.0 12.8 6.4 5.2 2.1 8.0 12.0 Q1 RC4558DRG4 SOIC D 8 2500 330.
PAGE 14
PACKAGE MATERIALS INFORMATION www.ti.com 15-Oct-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) RC4558DGKR VSSOP DGK 8 2500 364.0 364.0 27.0 RC4558DR SOIC D 8 2500 367.0 367.0 35.0 RC4558DRG3 SOIC D 8 2500 364.0 364.0 27.0 RC4558DRG4 SOIC D 8 2500 367.0 367.0 35.0 RC4558DRG4 SOIC D 8 2500 340.5 338.1 20.6 RC4558IDGKR VSSOP DGK 8 2500 364.0 364.0 27.0 RC4558IDR SOIC D 8 2500 340.
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.