Low Phase Noise Clock Evaluation Board User's Guide
1 General Description
User's Guide
SCAU020 – March 2007
10.9MHz–1175MHz Low Phase Noise Clock Evaluation
Board
Figure 1. CDCE421EVM Evaluation Board
Features:
• Easy-to-use evaluation module generates low phase noise clocks between
10.9MHz—1175MHz
• Simple device programming via host-powered USB port
• Fast configuration through provided software GUI
• Total board power provided either through USB port or separate 3.3V and ground
connections
• LVCMOS input interface or crystal input
• Standard 6-pin XO package connection available (for CDCE421-enabled XO
devices)
The CDCE421 is a high-performance, low phase noise clock generator. It has two fully integrated,
low-noise, liquid crystal (LC)-based voltage-controlled oscillators (VCOs) that operate in the
1.75GHz–2.35GHz range.
The CDCE421 has an integrated crystal oscillator circuitry that operates in conjunction with an external
AT-cut crystal to produce a stable frequency reference for the PLL-based frequency synthesizer. A 3.3V
LVCMOS level input can also be used instead of a crystal to provide a PLL frequency reference.
The evaluation module (EVM) is designed to quickly demonstrate the electrical performance of the device.
This fully assembled and factory-tested EVM allows complete validation of all device functions for a variety
of applications. Throughout this document, the acronym EVM and the phrases evaluation module and
evaluation board are synonymous with the CDCE421EVM. Figure 1 illustrates the CDCE421EVM.
For optimum performance, the board is equipped with 50 Ω SMA connectors and well-controlled 50 Ω
impedance microstrip transmission lines.
Windows, Windows XP are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective owners.
SCAU020 – March 2007 10.9MHz–1175MHz Low Phase Noise Clock Evaluation Board 5
Submit Documentation Feedback