Computer Hardware User Manual

www.ti.com

MSP-TS430PW24

Table B-5. MSP-TS430PW24 Bill of Materials

No. per

Position Ref Des Description DigiKey Part No. Comment

Board

1 C1, C2 0 12pF, SMD0805 DNP

2 C5 1 2.2nF, SMD0805

3 C3, C7 2 10uF/10V, SMD0805

4 C4, C6, C8 3 100nF, SMD0805 478-3351-2-ND

5 D1 1 green LED, SMD0805 P516TR-ND

DNP: Headers and receptacles

"SAM1029-07-

6 J1, J2 0 12-pin header, TH enclosed with kit. Keep vias free of

NDSAM1213-07-ND"

solder. (Header & Receptacle)

J5, JP1,

JP4, JP5, Place jumper on 1-2 of JP4-JP9

7 8 3-pin header, male, TH SAM1035-03-ND

JP6, JP7, Place on 1-2 on JP1

JP8, JP9

8 JP2, JP3 2 2-pin header, male, TH SAM1035-02-ND Place jumper on header

9 9 Jumper 15-38-1024-ND see Pos 7 an 8

14-pin connector, male,

10 JTAG 1 HRP14H-ND

11 Q1 0 Crystal DNP: keep vias free of solder

12 R1, R7 2 330 Ω, SMD0805 541-330ATR-ND

R5, R6,

13 2 0 Ohm, SMD0805 541-000ATR-ND DNP R5, R6

R8, R9,

14 R4 1 47k Ohm, SMD0805 541-47000ATR-ND

Socket: OTS

15 U1 1 Manuf.: Enplas

24(28)-065-02-00

16 PCB 1 68.5 x 61 mm 2 layers

Adhesive about 6mm width, 2mm e.g., 3M Bumpons Part

17 4 Apply to corners at bottom side

plastic feet height No. SJ-5302

18 MSP430 2 MSP430AFE2xx DNP: enclosed with kit, supplied by TI

SLAU278F–May 2009–Revised December 2010 Hardware

Submit Documentation Feedback