Computer Hardware User Manual

MSP-TS430RHA40A

www.ti.com

Table B-12. MSP-TS430RHA40A Bill of Materials

No. per

Position Ref Des Description DigiKey Part No. Comment

Board

1 C1, C2 0 12pF, SMD0805 DNP: C1, C2

2 C5 0 2.2nF, SMD0805 DNP C12

3 C3, C7 2 10uF/10V, SMD0805 5 DNP C11

4 C4, C6 2 100nF, SMD0805 478-3351-2-ND

5 C9 1 470nF, SMD0805

6 D1 1 green LED, SMD0805 P516TR-ND

DNP: headers and receptacles

J1, J2, J3,

7 4 10-pin header, TH enclosed with kit. Keep vias free of

solder. : Header : Receptacle

DNP: headers and receptacles

7.1 4 10-pin header, TH enclosed with kit. Keep vias free of

solder. : Header : Receptacle

J5, JP1,

JP4, JP5, Place jumper on 1-2 of JP4-JP9;

8 8 3-pin header, male, TH SAM1035-03-ND

JP6, JP7, Place on 1-2 on JP1

JP8, JP9

9 JP2, JP3 2 2-pin header, male, TH SAM1035-02-ND place jumper on header

10 9 Jumper 15-38-1024-ND see Pos 8 an 9

14-pin connector, male,

11 JTAG 1 HRP14H-ND

10-pin connector, male,

12 BOOTST 0 DNP. Keep vias free of solder

13 U1 1 Socket: QFN-40B-0.5-01 Manuf.: Enplas

Micro Crystal MS3V-T1R

14 Q1 0 Crystal 32.768kHz, C(Load) = DNP: Q1. Keep vias free of solder

12.5pF

15 R1,R7 2 330R SMD0805 541-330ATR-ND

R2, R3,

16 R5, R6, 2 0 Ohm, SMD0805 541-000ATR-ND DNP:R2, R3, R5, R6

R8, R9,

17 R4 1 47k SMD0805

18 PCB 1 79 x 66 mm 2 layers

Rubber select appropriate; e.g.,

19 4 apply to corners at bottom side

stand off Buerklin: 20H1724

DNP: enclosed with kit. Is supplied by

20 MSP430 2 MSP430N5736IRHA

Hardware SLAU278F–May 2009–Revised December 2010

Submit Documentation Feedback