Car Stereo System - Car Radio Digital Signal Processor User Manual

www.ti.com
CLKIN1
CLKIN2
POR
RESET
(A)(B)
RESETSTAT
Boot and
Device Configuration Pins
(C)
9
7
6
8
SM320C6455-EP
FIXED-POINT DIGITAL SIGNAL PROCESSOR
SPRS462B – SEPTEMBER 2007 – REVISED JANUARY 2008
A. RESET should only be used after device has been powered up. For more details on the use of the RESET pin, see
Section 7.6 , Reset Controller.
B. A reset signal is generated internally during a Warm Reset. This internal reset signal has the same effect as the
RESET pin during a Warm Reset.
C. Boot and Device Configurations Inputs (during reset) include: AEA[19:0], ABA[1:0], and PCI_EN.
Figure 7-9. Warm Reset and Max Reset Timing
Submit Documentation Feedback C64x+ Peripheral Information and Electrical Specifications 135