Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - transceivers RS485 1/1 PDIP 8

GND

D OR P PACKAGE

(TOP VIEW)

LOGIC DIAGRAM

(POSITIVE LOGIC)

0.5

1.5

2.5

3.5

4.5

0 20 40 60 80 100 120

- Differential Output Voltage - V

DIFFERENTIAL OUTPUT VOLTAGE

DIFFERENTIAL OUTPUT CURRENT

- Differential Output Current - mA

60 Ω Load

Line

30 Ω Load

Line

= 25°C

DE at V

D at V

= 5 V

SN65HVD05, SN65HVD06

SN75HVD05, SN65HVD07

SN75HVD06, SN75HVD07

www.ti.com

SLLS533E –MAY 2002– REVISED AUGUST 2009

HIGH OUTPUT RS-485 TRANSCEIVERS

Check for Samples: SN65HVD05, SN65HVD06, SN75HVD05, SN65HVD07, SN75HVD06, SN75HVD07

FEATURES

DESCRIPTION

• Minimum Differential Output Voltage of 2.5 V

The SN65HVD05, SN75HVD05, SN65HVD06,

Into a 54-Ω Load

SN75HVD06, SN65HVD07, and SN75HVD07

• Open-Circuit, Short-Circuit, and Idle-Bus

combine a 3-state differential line driver and

Failsafe Receiver

differential line receiver. They are designed for

• 1/8

Unit-Load Option Available (Up to 256

balanced data transmission and interoperate with

ANSI TIA/EIA-485-A and ISO 8482E

Nodes on the Bus)

standard-compliant devices. The driver is designed to

• Bus-Pin ESD Protection Exceeds 16 kV HBM

provide a differential output voltage greater than that

• Driver Output Slew Rate Control Options

required by these standards for increased noise

• Electrically Compatible With ANSI

margin. The drivers and receivers have active-high

and active-low enables respectively, which can be

TIA/EIA-485-A Standard

externally connected together to function as direction

• Low-Current Standby Mode: 1 µA Typical

control.

• Glitch-Free Power-Up and Power-Down

The driver differential outputs and receiver differential

Protection for Hot-Plugging Applications

inputs connect internally to form a differential input/

• Pin Compatible With Industry Standard

output (I/O) bus port that is designed to offer

SN75176

minimum loading to the bus whenever the driver is

disabled or not powered. These devices feature wide

APPLICATIONS

positive and negative common-mode voltage ranges,

making them suitable for party-line applications.

• Data Transmission Over Long or Lossy Lines

or Electrically Noisy Environments

• Profibus Line Interface

• Industrial Process Control Networks

• Point-of-Sale (POS) Networks

• Electric Utility Metering

• Building Automation

• Digital Motor Control

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (25 pages)

PAGE 1
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com HIGH OUTPUT RS-485 TRANSCEIVERS Check for Samples: SN65HVD05, SN65HVD06, SN75HVD05, SN65HVD07, SN75HVD06, SN75HVD07 FEATURES 1 • • • • • • • • • Minimum Differential Output Voltage of 2.
PAGE 2
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
PAGE 3
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com RECOMMENDED OPERATING CONDITIONS MIN NOM MAX Supply voltage, VCC Voltage at any bus terminal (separately or common mode) VI or VIC High-level input voltage, VIH D, DE, RE Low-level input voltage, VIL D, DE, RE 5.5 V –7 (1) 12 V 2 High-level output current, IOH Low-level output current, IOL V –12 Differential input voltage, VID (see Figure 7) 0.
PAGE 4
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com DRIVER SWITCHING CHARACTERISTICS over operating free-air temperature range unless otherwise noted MIN TYP (1) MAX HVD05 6.5 11 HVD06 27 40 HVD07 250 400 HVD05 6.5 11 PARAMETER tPLH Propagation delay time, low-to-high-level output tPHL Propagation delay time, high-to-low-level output TEST CONDITIONS HVD06 27 40 HVD07 250 400 3.
PAGE 5
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.
PAGE 6
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com RECEIVER SWITCHING CHARACTERISTICS over operating free-air temperature range unless otherwise noted PARAMETER TEST CONDITIONS MIN TYP (1) MAX UNIT tPLH Propagation delay time, low-to-high-level output 1/2 UL HVD05 14.6 25 ns tPHL Propagation delay time, high-to-low-level output 1/2 UL HVD05 14.
PAGE 7
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com VCC DE D Input 27 Ω ± 1% A A VA B VB VOC(PP) 27 Ω ± 1% B CL = 50 pF ±20% VOC ∆VOC(SS) VOC CL Includes Fixture and Instrumentation Capacitance Input: PRR = 500 kHz, 50% Duty Cycle,tr<6ns, tf<6ns, ZO = 50 Ω Figure 3. Test Circuit and Definitions for the Driver Common-Mode Output Voltage 3V VCC DE D Input Generator VI VOD 1.
PAGE 8
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com IA VA VIC VA + VB 2 VB A IO R VID B VO IB Figure 7. Receiver Voltage and Current Definitions A Input Generator R VI 50 Ω 1.5 V 0V B 3V VO CL = 15 pF ±20% RE CL Includes Fixture and Instrumentation Capacitance Generator: PRR = 100 kHz, 50% Duty Cycle, tr <6 ns, tf <6 ns, Zo = 50 Ω 1.5 V VI 1.5 V 0V tPLH VO tPHL 90% 90% 1.5 V 10% tr VOH 1.5 V 10% V OL tf Figure 8.
PAGE 9
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com A D 0 V or 3 V Generator: PRR = 100 kHz, 50% Duty Cycle, tr <6 ns, tf <6 ns, Zo = 50 Ω 3V B DE RE Input Generator VI 50 Ω A VCC VO S1 R 1 kΩ ± 1% B CL = 15 pF ±20% CL Includes Fixture and Instrumentation Capacitance 3V VI 1.5 V 1.5 V 0V tPZH(1) tPHZ VOH –0.5 V VOH D at 3 V S1 to B 1.5 V VO ≈0V tPZL(1) tPLZ VCC VO 1.5 V D at 0 V S1 to A VOL +0.5 V VOL Figure 9.
PAGE 10
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com Generator: PRR = 100 kHz, 50% Duty Cycle, tr <6 ns, tf <6 ns, Zo = 50 Ω 0V DE RE Input Generator VI 50 Ω A A VCC VO S1 R B 1 kΩ ± 1% B 0 V or 1.5 V 1.5 V or 0 V CL = 15 pF ±20% CL Includes Fixture and Instrumentation Capacitance 3V 1.5 V VI 0V tPZH(2) A at 1.5 V B at 0 V S1 to B VOH 1.5 V VO GND tPZL(2) A at 0 V B at 1.5 V S1 to A VCC 1.5 V VO VOL Figure 10.
PAGE 11
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com FUNCTION TABLES Table 1. DRIVER INPUT ENABLE D DE OUTPUTS A B H L X Open X H H L H Open H L Z H Z L H Z L Z Table 2. RECEIVER (1) DIFFERENTIAL INPUTS ENABLE OUTPUT VID = VA – VB RE R L L L H L L L Open L ? H Z H H H Z VID ≤ –0.2 V –0.2 V < VID < –0.01 V –0.
PAGE 12
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.
PAGE 13
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.
PAGE 14
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com TYPICAL CHARACTERISTICS (continued) HVD07 RMS SUPPLY CURRENT vs SIGNALING RATE 110 90 80 70 60 100 HVD05 50 0 HVD06 HVD07 -50 -150 40 100 400 700 Signaling Rate - kbps -200 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12 VI - Bus Input Voltage - V 1000 Figure 16. Figure 17.
PAGE 15
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com TYPICAL CHARACTERISTICS (continued) DIFFERENTIAL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE DRIVER OUTPUT CURRENT vs SUPPLY VOLTAGE 70 4 3.6 TA = 25°C DE at VCC D at VCC RL = 54 Ω 60 I O - Driver Output Current - mA VOD - Differential Output Voltage - V 3.8 DE at VCC D at VCC VCC = 5 V RL = 54 Ω 3.4 3.2 3 2.8 2.6 2.4 50 40 30 20 10 2.
PAGE 16
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com TYPICAL CHARACTERISTICS (continued) 375 W ± 1% Y D 0 or 3 V -7 V < V(TEST) < 12 V VOD 60 W ± 1% Z DE 375 W ± 1% Input Generator V 50 W 50% tpZH(diff) VOD (high) 1.5 V 0V tpZL(diff) -1.5 V VOD (low) Figure 24. Driver Enable Time From DE to VOD The time tpZL(x) is the measure from DE to VOD(x). VOD is valid when it is greater than 1.5 V.
PAGE 17
SN65HVD05, SN65HVD06 SN75HVD05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS533E – MAY 2002 – REVISED AUGUST 2009 www.ti.com APPLICATION INFORMATION RT RT Device HVD05 HVD06 HVD07 Number of Devices on Bus 64 256 256 NOTE: The line should be terminated at both ends with its characteristic impedance (RT = ZO). Stub lengths off the main line should be kept as short as possible. Figure 25.
PAGE 18
PACKAGE OPTION ADDENDUM www.ti.
PAGE 19
PACKAGE OPTION ADDENDUM www.ti.
PAGE 20
PACKAGE MATERIALS INFORMATION www.ti.com 13-Aug-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN65HVD05DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SN65HVD06DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SN65HVD07DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SN75HVD06DR SOIC D 8 2500 330.
PAGE 21
PACKAGE MATERIALS INFORMATION www.ti.com 13-Aug-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN65HVD05DR SOIC D 8 2500 340.5 338.1 20.6 SN65HVD06DR SOIC D 8 2500 340.5 338.1 20.6 SN65HVD07DR SOIC D 8 2500 340.5 338.1 20.6 SN75HVD06DR SOIC D 8 2500 340.5 338.1 20.6 SN75HVD07DR SOIC D 8 2500 340.5 338.1 20.
PAGE 22
PAGE 23
PAGE 24
PAGE 25
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.