Datasheet

Rs = 10 k
Ω
Rs = 100 k
Ω
Rs = 0
Ω
STANDBY
SN65HVD233-EP
www.ti.com ............................................................................................................................................................................................ SLLS944 – NOVEMBER 2008
Figure 29. Typical SN65HVD233 250-kbps Output Pulse Waveforms With Slope Control
If a high-level input (> 0.75 V
CC
) is applied to Rs (pin 8), the circuit enters a low-current, listen only standby mode
during which the driver is switched off and the receiver remains active. The local controller can reverse this
low-power standby mode when the rising edge of a dominant state (bus differential voltage >900 mV typical)
occurs on the bus.
Copyright © 2008, Texas Instruments Incorporated Submit Documentation Feedback 21
Product Folder Link(s): SN65HVD233-EP