Datasheet

DRIVER SWITCHING CHARACTERISTICS
SN65HVD233-EP
www.ti.com ............................................................................................................................................................................................ SLLS944 – NOVEMBER 2008
over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP
(1)
MAX UNIT
R
S
= 0 V, See Figure 4 35 95
Propagation delay time,
t
PLH
R
S
with 10 k Ω to ground, See Figure 4 70 125 ns
low-to-high-level output
R
S
with 100 k Ω to ground, See Figure 4 500 870
R
S
= 0 V, See Figure 4 70 120
Propagation delay time,
t
PHL
R
S
with 10 k Ω to ground, See Figure 4 130 180 ns
high-to-low-level output
R
S
with 100 k Ω to ground, SeeFigure 4 870 1200
R
S
= 0 V, See Figure 4 35
t
sk(p)
Pulse skew (|t
PHL
– t
PLH
|) R
S
with 10 k Ω to ground, See Figure 4 60 ns
R
S
with 100 k Ω to ground, SeeFigure 4 370
t
r
Differential output signal rise time 20 70
R
S
= 0 V, See Figure 4 ns
t
f
Differential output signal fall time 20 70
t
r
Differential output signal rise time 30 135
R
S
with 10 k Ω to ground, See Figure 4 ns
t
f
Differential output signal fall time 30 135
t
r
Differential output signal rise time 300 1400
R
S
with 100 k Ω to ground, See Figure 4 ns
t
f
Differential output signal fall time 300 1400
t
en(s)
Enable time from standby to dominant See Figure 8 0.6 1.5 µ s
(1) All typical values are at 25 ° C and with a 3.3 V supply. Timing parameters are characterized but not production tested.
Copyright © 2008, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Link(s): SN65HVD233-EP