Datasheet

RECEIVER SWITCHING CHARACTERISTICS
DEVICE SWITCHING CHARACTERISTICS
SN65HVD233-EP
www.ti.com ............................................................................................................................................................................................ SLLS944 – NOVEMBER 2008
over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP
(1)
MAX UNIT
t
PLH
Propagation delay time, low-to-high-level output 35 60
t
PHL
Propagation delay time, high-to-low-level output 35 60
t
sk(p)
Pulse skew (|t
PHL
– t
PLH
|) See Figure 6 7 ns
t
r
Output signal rise time 2 6.5
t
f
Output signal fall time 2 6.5
(1) All typical values are at 25 ° C and with a 3.3 V supply. Timing parameters are characterized but not production tested.
over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP
(1)
MAX UNIT
Loopback delay, driver input to
t
(LBK)
HVD233 See Figure 11 7.5 13 ns
receiver output
R
S
= 0 V, See Figure 10 70 135
Total loop delay, driver input to receiver output,
t
(loop1)
R
S
with 10 k Ω to ground, See Figure 10 105 190 ns
recessive to dominant
R
S
with 100 k Ω to ground, See Figure 10 535 1000
R
S
= 0 V, See Figure 10 70 135
Total loop delay, driver input to receiver output,
t
(loop2)
R
S
with 10 k Ω to ground, See Figure 10 105 190 ns
dominant to recessive
R
S
with 100 k Ω to ground, See Figure 10 535 1100
(1) All typical values are at 25 ° C and with a 3.3 V supply. Timing parameters are characterized but not production tested.
Copyright © 2008, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Link(s): SN65HVD233-EP