Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Inverter Inverter 7400 PDIP 14

SN5406, SN5416, SN7406, SN7416

HEX INVERTER BUFFERS/DRIVERS

WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS

SDLS031A – DECEMBER 1983 – REVISED DECEMBER 2001

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Convert TTL Voltage Levels to MOS Levels

High Sink-Current Capability

Input Clamping Diodes Simplify System

Design

Open-Collector Drivers for Indicator Lamps

and Relays

Inputs Fully Compatible With Most TTL

Circuits

description

These TTL hex inverter buffers/drivers feature

high-voltage open-collector outputs for interfacing

with high-level circuits (such as MOS) or for

driving high-current loads (such as lamps or

relays), and also are characterized for use as

inverter buffers for driving TTL inputs. The

SN5406 and SN7406 have minimum breakdown

voltages of 30 V. The SN5416 and SN7416 have

minimum breakdown voltages of 15 V. The

maximum sink current is 30 mA for the SN5406

and SN5416, and 40 mA for the SN7406 and

SN7416.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

Tube SN7406D

7406

SOIC D

Tape and reel SN7406DR

7406

SOIC

–

Tube SN7416D

7416

0°C to 70°C

Tape and reel SN7416DR

7416

PDIP N

Tube

SN7406N SN7406N

PDIP

–

Tube

SN7416N SN7416N

SOP – NS Tape and reel SN7406NSR SN7406

CDIP J

Tube SNJ5406J SNJ5406J

CDIP

–

Tube SNJ5416J SNJ5416J

–55°C to 125°C

CDIP W

Tube SNJ5406W SNJ5406W

CDIP

–

Tube SNJ5416W SNJ5416W

LCCC – FK Tube SNJ5406FK SNJ5406FK

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design

guidelines are available at www.ti.com/sc/package.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

SN5406, SN5416 ...J OR W PACKAGE

SN7406 . . . D, N, OR NS PACKAGE

SN7416 ...D OR N PACKAGE

(TOP VIEW)

GND

3212019

910111213

SN5406 . . . FK PACKAGE

(TOP VIEW)

GND

NC – No internal connection

On products compliant to MIL-PRF-38535, all parameters are tested

unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

Summary of content (17 pages)

PAGE 1
SN5406, SN5416, SN7406, SN7416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS031A – DECEMBER 1983 – REVISED DECEMBER 2001 D D D D D SN5406, SN5416 . . . J OR W PACKAGE SN7406 . . . D, N, OR NS PACKAGE SN7416 . . .
PAGE 2
SN5406, SN5416, SN7406, SN7416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS031A – DECEMBER 1983 – REVISED DECEMBER 2001 logic diagram (positive logic) 1A 1 2 1Y 2A 3 4 2Y 3A 5 6 3Y 4A 9 8 4Y 5A 11 10 5Y 6A 13 12 6Y Y=A schematic (each buffer/driver) ’06, ’16 VCC 6 kΩ 1.4 kΩ 1.6 kΩ Output Y Input A 2 kΩ 100 Ω 1 kΩ GND Resistor values shown are nominal.
PAGE 3
SN5406, SN5416, SN7406, SN7416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS031A – DECEMBER 1983 – REVISED DECEMBER 2001 recommended operating conditions SN5406 SN5416 VCC VIH Supply voltage VIL Low-level input voltage VOH High level output voltage High-level IOL TA Low-level output current High-level input voltage SN7406 SN7416 UNIT MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 2 2 V V 0.8 0.
PAGE 4
SN5406, SN5416, SN7406, SN7416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS031A – DECEMBER 1983 – REVISED DECEMBER 2001 PARAMETER MEASUREMENT INFORMATION VCC RL From Output Under Test Test Point CL (see Note A) LOAD CIRCUIT 3V 1.5 V Input 1.5 V 0V tPLH High-Level Pulse 1.5 V 1.5 V 1.5 V 1.5 V tPLH VOH Out-of-Phase Output 1.5 V 1.5 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES CL includes probe and jig capacitance.
PAGE 5
PACKAGE OPTION ADDENDUM www.ti.
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
PAGE 8
PACKAGE MATERIALS INFORMATION www.ti.com 8-Apr-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN7406DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN7406DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN7406DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN7406NSR SO NS 14 2000 330.0 16.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 8-Apr-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN7406DR SOIC D 14 2500 367.0 367.0 38.0 SN7406DR SOIC D 14 2500 333.2 345.9 28.6 SN7406DRG4 SOIC D 14 2500 333.2 345.9 28.6 SN7406NSR SO NS 14 2000 367.0 367.0 38.0 SN7416DR SOIC D 14 2500 367.0 367.0 38.0 SN7416NSR SO NS 14 2000 367.0 367.0 38.
PAGE 10
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.