Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Buffer, driver TSSOP 20

SN54AC240, SN74AC240

OCTAL BUFFERS/DRIVERS

WITH 3-STATE OUTPUTS

SCAS512E − JUNE 1995 − REVISED OCTOBER 2003

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

D 2-V to 6-V V

Operation

D Inputs Accept Voltages to 6 V

D Max t

of 6.5 ns at 5 V

description/ordering information

These octal buffers and line drivers are designed

specifically to improve the performance and

density of 3-state memory address drivers, clock

drivers, and bus-oriented receivers and

transmitters.

The ’AC240 devices are organized as two 4-bit

buffers/drivers with separate output-enable (OE

)

inputs. When OE

is low, the device passes

inverted data from the A inputs to the Y outputs.

When OE

is high, the outputs are in the

high-impedance state.

To ensure the high-impedance state during power

up or power down, OE should be tied to V

through a pullup resistor; the minimum value of

the resistor is determined by the current-sinking

capability of the driver.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP − N Tube SN74AC240N SN74AC240N

SOIC DW

Tube SN74AC240DW

AC240

SOIC − DW

Tape and reel SN74AC240DWR

AC240

−40°C to 85°C

SOP − NS Tape and reel SN74AC240NSR AC240

40 C

85 C

SSOP − DB Tape and reel SN74AC240DBR AC240

TSSOP PW

Tube SN74AC240PW

AC240

TSSOP − PW

Tape and reel SN74AC240PWR

AC240

CDIP − J Tube SNJ54AC240J SNJ54AC240J

−55°C to 125°C

CFP − W Tube SNJ54AC240W SNJ54AC240W

55 C

125 C

LCCC − FK Tube SNJ54AC240FK SNJ54AC240FK

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are

available at www.ti.com/sc/package.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

SN54AC240 . . . J OR W PACKAGE

SN74AC240 . . . DB, DW, N, NS, OR PW PACKAGE

(TOP VIEW)

3 2 1 20 19

9 10 11 12 13

1Y1

2A4

1Y2

2A3

1Y3

1A2

2Y3

1A3

2Y2

1A4

SN54AC240...FK PACKAGE

(TOP VIEW)

2Y4

1A1

1OE

1Y4

2A2 2OE

2Y1

GND

2A1

1OE

1A1

2Y4

1A2

2Y3

1A3

2Y2

1A4

2Y1

GND

2OE

1Y1

2A4

1Y2

2A3

1Y3

2A2

1Y4

2A1

On products compliant to MIL-PRF-38535, all parameters are tested

unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

Summary of content (21 pages)

PAGE 1
SN54AC240, SN74AC240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCAS512E − JUNE 1995 − REVISED OCTOBER 2003 D 2-V to 6-V VCC Operation D Inputs Accept Voltages to 6 V D Max tpd of 6.5 ns at 5 V SN54AC240 . . . J OR W PACKAGE SN74AC240 . . .
PAGE 2
SN54AC240, SN74AC240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCAS512E − JUNE 1995 − REVISED OCTOBER 2003 FUNCTION TABLE (each buffer) INPUTS OE A OUTPUT Y L H L L L H H X Z logic diagram (positive logic) 1OE 1A1 1A2 1A3 1A4 2OE 2A1 2A2 2A3 2A4 2 1 2 18 4 16 6 14 8 12 1Y1 1Y2 1Y3 1Y4 19 11 9 13 7 15 5 17 3 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2Y1 2Y2 2Y3 2Y4
PAGE 3
SN54AC240, SN74AC240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCAS512E − JUNE 1995 − REVISED OCTOBER 2003 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.
PAGE 4
SN54AC240, SN74AC240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCAS512E − JUNE 1995 − REVISED OCTOBER 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = −50 50 μA IOH = −24 24 mA A MAX SN74AC240 MIN 2.9 2.9 2.9 4.4 4.4 4.4 5.5 V 5.4 5.4 5.4 3V 2.56 2.4 2.46 4.5 V 3.86 3.7 3.76 5.5 V 4.86 4.7 4.76 MAX 5.5 V 3V 0.1 0.1 0.1 IOL = 50 μA 4.5 V 0.1 0.1 0.1 5.5 V 0.1 0.1 0.1 0.
PAGE 5
SN54AC240, SN74AC240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCAS512E − JUNE 1995 − REVISED OCTOBER 2003 switching characteristics over recommended operating VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL tPZH tPZL tPHZ tPLZ FROM (INPUT) TO (OUTPUT) A Y OE Y OE Y free-air TA = 25°C temperature SN54AC240 range, SN74AC240 MIN TYP MAX MIN MAX MIN MAX 1.5 4.5 6.5 1 8.5 1 7 1.5 4.5 6 1 8 1 6.5 1.5 5 7 1 9 1 8 1.5 5.5 8 1 10.
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74AC240DBR SSOP DB 20 2000 330.0 16.4 8.2 7.5 2.5 12.0 16.0 Q1 SN74AC240DWR SOIC DW 20 2000 330.0 24.4 10.8 13.0 2.7 12.0 24.0 Q1 SN74AC240NSR SO NS 20 2000 330.0 24.4 8.2 13.0 2.5 12.0 24.
PAGE 10
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AC240DBR SN74AC240DWR SSOP DB 20 2000 367.0 367.0 38.0 SOIC DW 20 2000 367.0 367.0 45.0 SN74AC240NSR SO NS 20 2000 367.0 367.0 45.0 SN74AC240PWR TSSOP PW 20 2000 367.0 367.0 38.
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 21
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.