Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Inverter Inverter 74AHC TSSOP 14

SN54AHC05, SN74AHC05

HEX INVERTERS

WITH OPEN-DRAIN OUTPUTS

SCLS357H – MAY 1997 – REVISED JULY 2003

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Operating Range 2-V to 5.5-V V

Latch-Up Performance Exceeds 250 mA Per

JESD 17

ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

description/ordering information

The ’AHC05 devices contain six independent

inverters. These devices perform the Boolean

function Y = A

The open-drain outputs require pullup resistors to

perform correctly. They can be connected to other

open-drain outputs to implement active-low

wired-OR or active-high wired-AND functions.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP – N Tube SN74AHC05N SN74AHC05N

SOIC – D

Tube SN74AHC05D

AHC05

SOIC

–

Tape and reel SN74AHC05DR

AHC05

–40°C to 85°C

SSOP – DB Tape and reel SN74AHC05DBR HA05

TSSOP PW

Tube SN74AHC05PW

HA05

TSSOP

–

Tape and reel SN74AHC05PWR

HA05

TVSOP – DGV Tape and reel SN74AHC05DGVR HA05

CDIP – J Tube SNJ54AHC05J SNJ54AHC05J

–55°C to 125°C

CFP – W Tube SNJ54AHC05W SNJ54AHC05W

LCCC – FK Tube SNJ54AHC05FK SNJ54AHC05FK

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines

are available at www.ti.com/sc/package.

UNLESS OTHERWISE NOTED this document contains PRODUCTION

DATA information current as of publication date. Products conform to

specifications per the terms of Texas Instruments standard warranty.

Production processing does not necessarily include testing of all

parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

GND

SN54AHC05 ...J OR W PACKAGE

SN74AHC05 . . . D, DB, DGV, N, OR PW PACKAGE

(TOP VIEW)

3212019

910111213

GND

SN54AHC05 . . . FK PACKAGE

(TOP VIEW)

NC – No internal connection

Summary of content (16 pages)

PAGE 1
SN54AHC05, SN74AHC05 HEX INVERTERS WITH OPEN-DRAIN OUTPUTS SCLS357H – MAY 1997 – REVISED JULY 2003 D D D SN54AHC05 . . . J OR W PACKAGE SN74AHC05 . . . D, DB, DGV, N, OR PW PACKAGE (TOP VIEW) Operating Range 2-V to 5.
PAGE 2
SN54AHC05, SN74AHC05 HEX INVERTERS WITH OPEN-DRAIN OUTPUTS SCLS357H – MAY 1997 – REVISED JULY 2003 FUNCTION TABLE (each inverter) INPUT A OUTPUT Y H L L H logic diagram, each inverter (positive logic) A Y absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . .
PAGE 3
SN54AHC05, SN74AHC05 HEX INVERTERS WITH OPEN-DRAIN OUTPUTS SCLS357H – MAY 1997 – REVISED JULY 2003 recommended operating conditions (see Note 3) SN54AHC05 VCC Supply voltage VIH VCC = 2 V VCC = 3 V High-level input voltage Low-level input voltage VI VO 5.5 2 5.5 UNIT V 1.5 2.1 3.85 V 0.5 0.9 0.9 1.65 1.65 V 0 5.5 0 5.5 V 0 VCC 50 0 VCC 50 mA VCC = 5 V ± 0.5 V VCC = 3.3 V ± 0.3 V Input transition rise or fall rate MAX 2.1 VCC = 2 V VCC = 3.3 V ± 0.
PAGE 4
SN54AHC05, SN74AHC05 HEX INVERTERS WITH OPEN-DRAIN OUTPUTS SCLS357H – MAY 1997 – REVISED JULY 2003 switching characteristics over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE tPLZ tPZL A Y CL = 15 pF tPLZ tPZL A Y CL = 50 pF MIN TA = 25°C TYP MAX SN54AHC05 SN74AHC05 MIN MAX MIN MAX 2.2* 5.5* 1* 6.5* 1 6.5 2.9* 5.5* 1* 6.5* 1 6.5 3.4 7.5 1 8.5 1 8.5 4.2 7.
PAGE 5
SN54AHC05, SN74AHC05 HEX INVERTERS WITH OPEN-DRAIN OUTPUTS SCLS357H – MAY 1997 – REVISED JULY 2003 PARAMETER MEASUREMENT INFORMATION From Output Under Test RL = 1 kΩ From Output Under Test Test Point S1 VCC Open TEST GND CL (see Note A) CL (see Note A) S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open Drain Open VCC GND VCC LOAD CIRCUIT FOR 3-STATE AND OPEN-DRAIN OUTPUTS LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS VCC 50% VCC Timing Input tw tsu VCC Input 50% VCC 50% VCC 0V th VCC 50% VCC Data Input 5
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.com 11-Nov-2009 retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.
PAGE 8
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74AHC05DBR Package Package Pins Type Drawing SSOP SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN74AHC05DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74AHC05PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AHC05DBR SSOP DB 14 2000 367.0 367.0 38.0 SN74AHC05DR SOIC D 14 2500 367.0 367.0 38.0 SN74AHC05PWR TSSOP PW 14 2000 367.0 367.0 35.
PAGE 10
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 16
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.