SN54AHC08 SN74AHC08 www.ti.com SCLS236I – MARCH 1996 – REVISED MAY 2013 QUADRUPLE 2-INPUT POSITIVE-AND GATES Check for Samples: SN54AHC08, SN74AHC08 FEATURES 1 Operating Range 2-V to 5.5-V Latch-Up Performance Exceeds 250 mA Per JESD 17 SN54AHC08 . . . JORWP ACKAGE SN74AHC08 . . . D,DB,DGV,N,NS, OR PW PACKAGE (TOP VIEW) 13 3 12 4 11 5 10 6 9 7 8 SN54AHC08 . . .
SN54AHC08 SN74AHC08 SCLS236I – MARCH 1996 – REVISED MAY 2013 www.ti.com ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) (1) VALUE UNIT Supply voltage range, VCC –0.5 to 7 V Input voltage range, VI (2) –0.5 to 7 V Output voltage range, VO (2) –0.5 to VCC + 0.
SN54AHC08 SN74AHC08 www.ti.com SCLS236I – MARCH 1996 – REVISED MAY 2013 ELECTRICAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS SN74AHC08 MAX MIN MAX MIN Recommended MIN TYP 2V 1.9 2 1.9 1.9 1.9 MAX MIN 2.9 2.9 3 2.9 2.9 4.4 4.5 4.4 4.4 4.4 IOH = –4 mA 3V 2.58 2.48 2.48 2.48 IOH = –8 mA 4.5 V 3.94 VOL ICC VI = VCC or GND, Ci VI = VCC or GND IO = 0 V 3.8 0.1 0.1 0.1 0.1 3V 0.1 0.1 0.1 0.
SN54AHC08 SN74AHC08 SCLS236I – MARCH 1996 – REVISED MAY 2013 www.ti.com NOISE CHARACTERISTICS VCC = 5 V, CL = 50 pF, TA = 25°C (1) SN74AHC08 PARAMETER MIN UNIT MAX VOL(P) Quiet output, maximum dynamic VOL 0.8 V VOL(V) Quiet output, minimum dynamic VOL –0.8 V VOH(V) Quiet output, minimum dynamic VOH 4.4 VIH(D) High-level dynamic input voltage 3.5 VIL(D) Low-level dynamic input voltage (1) V V 1.5 V Characteristics are for surface-mount packages only.
SN54AHC08 SN74AHC08 www.ti.
SN54AHC08 SN74AHC08 SCLS236I – MARCH 1996 – REVISED MAY 2013 www.ti.com REVISION HISTORY Changes from Revision H (July 2003) to Revision I Page • Changed document format from Quicksilver to DocZone. .................................................................................................... 1 • Extended operating temperature range to 125°C .................................................................................................................
PACKAGE OPTION ADDENDUM www.ti.
PACKAGE OPTION ADDENDUM www.ti.
PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
PACKAGE OPTION ADDENDUM www.ti.
PACKAGE MATERIALS INFORMATION www.ti.com 23-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74AHC08DBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN74AHC08DGVR TVSOP DGV 14 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74AHC08DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.
PACKAGE MATERIALS INFORMATION www.ti.com 23-Oct-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AHC08DBR SSOP DB 14 2000 367.0 367.0 38.0 SN74AHC08DGVR TVSOP DGV 14 2000 367.0 367.0 35.0 SN74AHC08DR SOIC D 14 2500 367.0 367.0 38.0 SN74AHC08NSR SO NS 14 2000 367.0 367.0 38.0 SN74AHC08PWR TSSOP PW 14 2000 367.0 367.0 35.0 SN74AHC08PWRG4 TSSOP PW 14 2000 367.0 367.0 35.
MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0°– 8° 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters.
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.