SN54AHC157 SN74AHC157 www.ti.com SCLS345J – MAY 1996 – REVISED JUNE 2013 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS Check for Samples: SN54AHC157, SN74AHC157 FEATURES 1 Operating Range 2-V to 5.5-V Latch-Up Performance Exceeds 250 mA Per JESD 17 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC G 4A 4B 4Y 3A 3B 3Y 1A 1B 1Y 2A 2B 2Y 16 1A A/B NC VCC G 1 15 G 14 4A 2 3 13 4B 12 4Y 4 5 11 3A 10 3B 6 7 8 9 SN54AHC157 . . .
SN54AHC157 SN74AHC157 SCLS345J – MAY 1996 – REVISED JUNE 2013 www.ti.com LOGIC DIAGRAM (POSITIVE LOGIC) 2 1A 4 3 1Y 1B 5 2A 7 6 2Y 2B 3A 11 9 10 3Y 3B 4A 14 12 13 4Y 4B G A/B 15 1 Pin numbers shown are for the D, DB, DGV, J, N, NS, PW, RGY, and W packages.
SN54AHC157 SN74AHC157 www.ti.com SCLS345J – MAY 1996 – REVISED JUNE 2013 ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) (1) VALUE UNIT Supply voltage range, VCC –0.5 to 7 V Input voltage range, VI (2) –0.5 to 7 V Output voltage range, VO (2) –0.5 to VCC + 0.
SN54AHC157 SN74AHC157 SCLS345J – MAY 1996 – REVISED JUNE 2013 www.ti.com ELECTRICAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = –50 µA SN54AHC157 SN74AHC157 MAX MIN MAX MIN TA = –40°C TO 125°C Recommended MIN TYP 2V 1.9 2 1.9 1.9 1.9 MAX MIN 2.9 2.9 3 2.9 2.9 4.4 4.5 4.4 4.4 4.4 IOH = –4 mA 3V 2.58 2.48 2.48 2.48 IOH = –8 mA 4.5 V 3.
SN54AHC157 SN74AHC157 www.ti.com SCLS345J – MAY 1996 – REVISED JUNE 2013 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 5 V ± 0.
SN54AHC157 SN74AHC157 SCLS345J – MAY 1996 – REVISED JUNE 2013 www.ti.
SN54AHC157 SN74AHC157 www.ti.com SCLS345J – MAY 1996 – REVISED JUNE 2013 REVISION HISTORY Changes from Revision I (May 1996) to Revision J Page • Changed document format from Quicksilver to DocZone. .................................................................................................... 1 • Extended operating temperature range to 125°C .................................................................................................................
PACKAGE OPTION ADDENDUM www.ti.
PACKAGE OPTION ADDENDUM www.ti.
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 6-Nov-2013 Status (1) SNJ54AHC157W ACTIVE Package Type Package Pins Package Drawing Qty CFP W 16 1 Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) TBD A42 N / A for Pkg Type Op Temp (°C) Device Marking (4/5) -55 to 125 5962-9764201QF A SNJ54AHC157W (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs.
PACKAGE OPTION ADDENDUM www.ti.
PACKAGE MATERIALS INFORMATION www.ti.com 6-Nov-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.6 2.5 12.0 16.0 Q1 SN74AHC157DBR SSOP DB 16 2000 330.0 16.4 8.2 SN74AHC157DGVR TVSOP DGV 16 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74AHC157DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.
PACKAGE MATERIALS INFORMATION www.ti.com 6-Nov-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AHC157DBR SSOP DB 16 2000 367.0 367.0 38.0 SN74AHC157DGVR TVSOP DGV 16 2000 367.0 367.0 35.0 SN74AHC157DR SOIC D 16 2500 333.2 345.9 28.6 SN74AHC157NSR SO NS 16 2000 367.0 367.0 38.0 SN74AHC157PWR TSSOP PW 16 2000 367.0 367.0 35.0 SN74AHC157PWRG3 TSSOP PW 16 2000 364.0 364.0 27.
MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0°– 8° 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters.
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.