Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches PDIP 14

SN74AHC4066

QUADRUPLE BILATERAL ANALOG SWITCH

SCLS511 − JUNE 2003

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

D 2-V to 5.5-V V

Operation

D Supports Mixed-Mode Voltage Operation on

All Ports

D High On-Off Output-Voltage Ratio

D Low Crosstalk Between Switches

D Individual Switch Controls

D Extremely Low Input Current

D ESD Protection Exceeds JESD 22

− 2000-V Human-Body Model (A114-A)

− 200-V Machine Model (A115-A)

− 1000-V Charged-Device Model (C101)

description/ordering information

This quadruple silicon-gate CMOS analog switch

is designed for 2-V to 5.5-V V

operation.

This switch is designed to handle both analog and

digital signals. Each switch permits signals with

amplitudes up to 5.5 V (peak) to be transmitted in

either direction.

Each switch section has its own enable-input

control (C). A high-level voltage applied to C turns

on the associated switch section.

Applications include signal gating, chopping,

modulation or demodulation (modem), and signal

multiplexing for analog-to-digital and

digital-to-analog conversion systems.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP − N Tube SN74AHC4066N SN74AHC4066N

QFN − RGY Tape and reel SN74AHC4066RGYR HA4066

SOIC D

Tube SN74AHC4066D

AHC4066

SOIC − D

Tape and reel SN74AHC4066DR

AHC4066

SOP NS

Tube SN74AHC4066NS

AHC4066

−40°C to 85°C

SOP − NS

Tape and reel SN74AHC4066NSR

AHC4066

SSOP DB

Tube SN74AHC4066DB

HA4066

SSOP − DB

Tape and reel SN74AHC4066DBR

HA4066

TSSOP PW

Tube SN74AHC4066PW

HA4066

TSSOP − PW

Tape and reel SN74AHC4066PWR

HA4066

TVSOP − DGV Tape and reel SN74AHC4066DGVR HA4066

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines

are available at www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

GND

D, DB, DGV, N, NS, OR PW PACKAGE

(TOP VIEW)

RGY PACKAGE

(TOP VIEW)

114

GND

NC − No internal connection

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Summary of content (27 pages)

PAGE 1
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 D 2-V to 5.
PAGE 2
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 FUNCTION TABLE (each switch) INPUT CONTROL (C) SWITCH L OFF H ON logic diagram (positive logic) A VCC VCC B C One of Four Switches absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . .
PAGE 3
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 recommended operating conditions (see Note 5) VCC Supply voltage VCC = 2 V VIH High level input voltage, High-level voltage control inputs MIN MAX 2† 5.5 Low level input voltage, Low-level voltage control inputs V 1.5 VCC = 2.3 V to 2.7 V VCC × 0.7 VCC = 3 V to 3.6 V VCC × 0.7 VCC = 4.5 V to 5.5 V VCC × 0.7 VCC = 2 V VIL UNIT V 0.5 VCC = 2.3 V to 2.7 V VCC × 0.3 VCC = 3 V to 3.6 V VCC × 0.3 VCC = 4.5 V to 5.
PAGE 4
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VCC TA = 25°C MIN TYP MAX MIN MAX UNIT IT = −1 mA,, VI = VCC or GND, VC = VIH (see Figure 1) 2.3 V 38 180 225 3V 29 150 190 4.5 V 21 75 100 IT = −1 mA, VI = VCC to GND, VC = VIH 2.3 V 143 500 600 3V 57 180 225 4.
PAGE 5
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 switching characteristics over recommended operating free-air temperature range, VCC = 2.5 V ± 0.2 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS TA = 25°C MIN TYP MAX MIN MAX UNIT tPLH tPHL Propagation delay time A or B B or A CL = 15 pF, (see Figure 4) 1.2 10 16 ns tPZH tPZL Switch turn-on time C A or B CL = 15 pF, RL = 1 kΩ (see Figure 5) 3.
PAGE 6
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 switching characteristics over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS TA = 25°C MIN TYP MAX MIN MAX UNIT tPLH tPHL Propagation delay time A or B B or A CL = 15 pF, (see Figure 4) 0.3 4 7 ns tPZH tPZL Switch turn-on time C A or B CL = 15 pF, RL = 1 kΩ (see Figure 5) 1.
PAGE 7
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 PARAMETER MEASUREMENT INFORMATION VCC VC = VIH VCC VI = VCC or GND VO (ON) GND r on + VI – VO 10 –3 W 1 mA V VI − VO Figure 1. On-State Resistance Test Circuit VCC VC = VIL VCC VI A (OFF) VO GND Condition 1: VI = 0, VO = VCC Condition 2: VI = VCC, VO = 0 Figure 2. Off-State Switch Leakage-Current Test Circuit VCC VC = VIH VCC VI A (ON) Open GND VI = VCC or GND Figure 3.
PAGE 8
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 PARAMETER MEASUREMENT INFORMATION VCC VC = VIH VCC VI VO (ON) 50 Ω CL GND TEST CIRCUIT tr VI A or B tf 90% 50% 10% VCC 90% 50% 10% tPLH 0V tPHL VOH VO B or A 50% 50% VOL VOLTAGE WAVEFORMS Figure 4.
PAGE 9
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 PARAMETER MEASUREMENT INFORMATION VCC 50 Ω VC VCC VI S1 VO RL = 1 kΩ TEST S1 S2 tPZL tPZH tPLZ tPHZ GND VCC GND VCC VCC GND VCC GND S2 CL GND TEST CIRCUIT VCC VC VCC 50% 50% 0V 0V tPZL tPZH ≈VCC VO VOL VOH 50% 50% ≈0 V (tPZL, tPZH) VCC VC VCC 50% 50% 0V 0V tPLZ tPHZ ≈VCC VO VOL VOH VOL + 0.3 V VOH − 0.3 V ≈0 V (tPLZ, tPHZ) VOLTAGE WAVEFORMS Figure 5.
PAGE 10
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 PARAMETER MEASUREMENT INFORMATION VCC VCC 0.1 μF fin VCC VI VO (ON) GND 50 Ω RL = 600 Ω CL = 50 pF VCC/2 Figure 6. Frequency Response (Switch On) VCC VC = VCC 50 Ω VCC VI fin VO1 (ON) 0.1 μF 600 Ω GND RL = 600 Ω CL = 50 pF VCC/2 VI VCC VC = GND VCC (OFF) 600 Ω VO2 GND RL = 600 Ω CL = 50 pF VCC/2 Figure 7.
PAGE 11
SN74AHC4066 QUADRUPLE BILATERAL ANALOG SWITCH SCLS511 − JUNE 2003 PARAMETER MEASUREMENT INFORMATION VCC VC = GND 0.1 μF fin 50 Ω VI VCC VO (OFF) GND 600 Ω RL = 600 Ω CL = 50 pF VCC/2 VCC/2 Figure 9. Feed-Through Attenuation (Switch Off) VCC VC = VCC 10 μF fin 600 Ω VI 10 μF VCC VO (ON) GND RL = 10 kΩ CL = 50 pF VCC/2 Figure 10.
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.
PAGE 13
PACKAGE OPTION ADDENDUM www.ti.com 8-Dec-2009 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
PAGE 14
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74AHC4066DBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN74AHC4066DGVR TVSOP DGV 14 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74AHC4066DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.
PAGE 15
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AHC4066DBR SSOP DB 14 2000 367.0 367.0 38.0 SN74AHC4066DGVR TVSOP DGV 14 2000 367.0 367.0 35.0 SN74AHC4066DR SOIC D 14 2500 367.0 367.0 38.0 SN74AHC4066NSR SO NS 14 2000 367.0 367.0 38.0 SN74AHC4066PWR TSSOP PW 14 2000 367.0 367.0 35.0 SN74AHC4066RGYR VQFN RGY 14 3000 367.0 367.0 35.
PAGE 16
PAGE 17
MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0°– 8° 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
PAGE 25
PAGE 26
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 27
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.