Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Multiplexer Multiplexer Single supply SOIC 16 N

SN54AHCT157, SN74AHCT157

QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS

SCLS347K – MAY 1996 – REVISED JULY 2003

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Inputs Are TTL-Voltage Compatible

Latch-Up Performance Exceeds 250 mA Per

JESD 17

description/ordering information

These quadruple 2-line to 1-line data

selectors/multiplexers are designed for 4.5-V to

5.5-V V

operation.

The ’AHCT157 devices feature a common strobe

) input. When the strobe is high, all outputs are

low. When the strobe is low, a 4-bit word is

selected from one of two sources and is routed to

the four outputs. The devices provide true data.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP – N Tube SN74AHCT157N SN74AHCT157N

SOIC – D

Tube SN74AHCT157D

AHCT157

SOIC

–

Tape and reel SN74AHCT157DR

AHCT157

–40

Cto85

SOP – NS Tape and reel SN74AHCT157NSR AHCT157

–

40°C

85°C

SSOP – DB Tape and reel SN74AHCT157DBR HB157

TSSOP PW

Tube SN74AHCT157PW

HB157

TSSOP

–

Tape and reel SN74AHCT157PWR

HB157

TVSOP – DGV Tape and reel SN74AHCT157DGVR HB157

CDIP – J Tube SNJ54AHCT157J SNJ54AHCT157J

–55°C to 125°C

CFP – W Tube SNJ54AHCT157W SNJ54AHCT157W

LCCC – FK Tube SNJ54AHCT157K SNJ54AHCT157FK

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are

available at www.ti.com/sc/package.

UNLESS OTHERWISE NOTED this document contains PRODUCTION

DATA information current as of publication date. Products conform to

specifications per the terms of Texas Instruments standard warranty.

Production processing does not necessarily include testing of all

parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

SN54AHCT157 ...J OR W PACKAGE

SN74AHCT157 . . . D, DB, DGV, N, NS, OR PW PACKAGE

(TOP VIEW)

3212019

910111213

SN54AHCT157 . . . FK PACKAGE

(TOP VIEW)

A/B

GND

A/B

GND

NC – No internal connection

Summary of content (16 pages)

PAGE 1
SN54AHCT157, SN74AHCT157 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS347K – MAY 1996 – REVISED JULY 2003 D D SN54AHCT157 . . . J OR W PACKAGE SN74AHCT157 . . . D, DB, DGV, N, NS, OR PW PACKAGE (TOP VIEW) Inputs Are TTL-Voltage Compatible Latch-Up Performance Exceeds 250 mA Per JESD 17 A /B 1A 1B 1Y 2A 2B 2Y GND description/ordering information These quadruple 2-line to 1-line data selectors/multiplexers are designed for 4.5-V to 5.5-V VCC operation.
PAGE 2
SN54AHCT157, SN74AHCT157 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS347K – MAY 1996 – REVISED JULY 2003 FUNCTION TABLE INPUTS G A/B A B OUTPUT Y H X X X L L L L X L L L H X H L H X L L L H X H H logic diagram (positive logic) 1A 2 4 1B 2A 3 5 7 2B 3A 6 4A 10 G A/B 13 15 1 Pin numbers shown are for the D, DB, DGV, J, N, NS, PW, and W packages.
PAGE 3
SN54AHCT157, SN74AHCT157 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS347K – MAY 1996 – REVISED JULY 2003 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.
PAGE 4
SN54AHCT157, SN74AHCT157 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS347K – MAY 1996 – REVISED JULY 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC IOH = –50 mA VOH 4.4 45V 4.5 IOH = –8 mA IOL = 50 mA VOL ∆ICC† TA = 25°C TYP MAX MIN 4.5 SN74AHCT157 MAX MIN 4.4 4.4 3.8 3.8 MAX UNIT V 0.1 0.1 0.1 0.36 0.44 0.44 ±0.1 ±1* ±1 mA 5.5 V 2 20 20 mA 5.5 V 1.35 1.5 1.
PAGE 5
SN54AHCT157, SN74AHCT157 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCLS347K – MAY 1996 – REVISED JULY 2003 operating characteristics, VCC = 5 V, TA = 25°C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance No load, TYP f = 1 MHz UNIT 11 pF PARAMETER MEASUREMENT INFORMATION From Output Under Test Test Point RL = 1 kΩ From Output Under Test VCC Open S1 TEST GND CL (see Note A) CL (see Note A) S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open Drain Open VCC GND VCC LOAD CIRCUI
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.
PAGE 8
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.6 2.5 12.0 16.0 Q1 SN74AHCT157DBR SSOP DB 16 2000 330.0 16.4 8.2 SN74AHCT157DGVR TVSOP DGV 16 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74AHCT157DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AHCT157DBR SSOP DB 16 2000 367.0 367.0 38.0 SN74AHCT157DGVR TVSOP DGV 16 2000 367.0 367.0 35.0 SN74AHCT157DR SOIC D 16 2500 333.2 345.9 28.6 SN74AHCT157PWR TSSOP PW 16 2000 367.0 367.0 35.
PAGE 10
PAGE 11
MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0°– 8° 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 12
PAGE 13
PAGE 14
PAGE 15
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 16
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.