Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Buffer, driver SOIC 14

SN54ALS1035, SN74ALS1035

HEX NONINVERTING BUFFERS

WITH OPEN-COLLECTOR OUTPUTS

SDAS243B – APRIL 1982 – REVISED AUGUST 2001

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Noninverting Buffers With

Open-Collector Outputs

description

These devices contain six independent

noninverting buffers. They perform the Boolean

function Y = A. The open-collector outputs require

pullup resistors to perform correctly. They can be

connected to other open-collector outputs to

implement active-low wired-OR or active-high

wired-AND functions. Open-collector devices are

often used to generate higher V

levels.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

SOIC D

Tube SN7ALS1035D

ALS1035

0°C to 70°C

SOIC

–

Tape and reel SN7ALS1035DR

ALS1035

PDIP – N Tube SN74ALS1035N SN74ALS1035N

CDIP – J Tube SNJ54ALS1035J SNJ54ALS1035J

–55°C to 125°C

CFP – W Tube SNJ54ALS1035W SNJ54ALS1035W

LCCC - FK Tube SNJ54ALS1035FK SNJ54ALS1035FK

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines

are available at www.ti.com/sc/package.

FUNCTION TABLE

(each buffer)

INPUT

OUTPUT

H H

L L

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

SN54ALS1035 . . . FK PACKAGE

(TOP VIEW)

3 2 1 20 19

9 10 11 12 13

NC – No internal connection

GND

SN54ALS1035 ...J OR W PACKAGE

SN74ALS1035 ...D OR N PACKAGE

(TOP VIEW)

GND

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

On products compliant to MIL-PRF-38535, all parameters are tested

unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

Summary of content (16 pages)

PAGE 1
SN54ALS1035, SN74ALS1035 HEX NONINVERTING BUFFERS WITH OPEN-COLLECTOR OUTPUTS SDAS243B – APRIL 1982 – REVISED AUGUST 2001 D SN54ALS1035 . . . J OR W PACKAGE SN74ALS1035 . . . D OR N PACKAGE (TOP VIEW) Noninverting Buffers With Open-Collector Outputs description 1A 1Y 2A 2Y 3A 3Y GND These devices contain six independent noninverting buffers. They perform the Boolean function Y = A. The open-collector outputs require pullup resistors to perform correctly.
PAGE 2
SN54ALS1035, SN74ALS1035 HEX NONINVERTING BUFFERS WITH OPEN-COLLECTOR OUTPUTS SDAS243B – APRIL 1982 – REVISED AUGUST 2001 logic diagram (positive logic) 1A 2A 3A 4A 5A 6A 1 2 3 4 5 6 9 8 11 10 13 12 1Y 2Y 3Y 4Y 5Y 6Y Pin numbers shown are for the D, J, N, and W packages. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
SN54ALS1035, SN74ALS1035 HEX NONINVERTING BUFFERS WITH OPEN-COLLECTOR OUTPUTS SDAS243B – APRIL 1982 – REVISED AUGUST 2001 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK SN54ALS1035 TYP† MAX TEST CONDITIONS VCC = 4.5 V, VOL VCC = 4 4.5 5V IOH II VCC = 4.5 V, VCC = 5.5 V, IIH IIL VCC = 5.5 V, VCC = 5.5 V, ICCH ICCL VCC = 5.5 V, VCC = 5.5 V, MIN II = –18 mA IOL = 12 mA SN74ALS1035 TYP† MAX MIN –1.5 0.
PAGE 4
SN54ALS1035, SN74ALS1035 HEX NONINVERTING BUFFERS WITH OPEN-COLLECTOR OUTPUTS SDAS243B – APRIL 1982 – REVISED AUGUST 2001 PARAMETER MEASUREMENT INFORMATION SERIES 54ALS/74ALS AND 54AS/74AS DEVICES 7V RL = R1 = R2 VCC S1 RL R1 Test Point From Output Under Test CL (see Note A) From Output Under Test RL Test Point From Output Under Test CL (see Note A) CL (see Note A) LOAD CIRCUIT FOR BI-STATE TOTEM-POLE OUTPUTS LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS 3.
PAGE 5
PACKAGE OPTION ADDENDUM www.ti.
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.
PAGE 8
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74ALS1035DR Package Package Pins Type Drawing SOIC D 14 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2500 330.0 16.4 Pack Materials-Page 1 6.5 B0 (mm) K0 (mm) P1 (mm) 9.0 2.1 8.0 W Pin1 (mm) Quadrant 16.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74ALS1035DR SOIC D 14 2500 367.0 367.0 38.
PAGE 10
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.