Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Gate OR gate 74AS PDIP 20

SN54ALS832A, SN54AS832B, SN74ALS832A, SN74AS832B

HEX 2-INPUT OR DRIVERS

SDAS017C – DECEMBER 1982 – REVISED JANUARY 1995

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

• High Capacitive-Drive Capability

• ′ALS832A Has Typical Delay Time of 4.8 ns

= 50 pF) and Typical Power Dissipation

of 4.5 mW Per Gate

• ′AS832B Has Typical Delay Time of 3.2 ns

= 50 pF) and Typical Power Dissipation

of Less Than 13 mW Per Gate

• Package Options Include Plastic

Small-Outline (DW) Packages, Ceramic

Chip Carriers (FK), and Standard Plastic (N)

and Ceramic (J) 300-mil DIPs

description

These devices contain six independent 2-input

OR drivers. They perform the Boolean functions

Y = A + B or Y = A

• B in positive logic.

The SN54ALS832A and SN54AS832B are

characterized for operation over the full military

temperature range of –55°C to 125°C. The

SN74ALS832A and SN74AS832B are

characterized for operation from 0°C to 70°C.

FUNCTION TABLE

(each driver)

INPUTS

OUTPUT

A B

H X H

X HH

LL L

logic symbol

†

logic diagram (positive logic)

≥1

†

This symbol is in accordance with ANSI/IEEE Std 91-1984 and

IEC Publication 617-12.

GND

SN54ALS832A, SN54AS832B ...J PACKAGE

SN74ALS832A, SN74AS832B . . . DW OR N PACKAGE

(TOP VIEW)

3 2 1 20 19

910111213

SN54ALS832A, SN54AS832B . . . FK PACKAGE

(TOP VIEW)

4B 6B

GND

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Summary of content (17 pages)

PAGE 1
SN54ALS832A, SN54AS832B, SN74ALS832A, SN74AS832B HEX 2-INPUT OR DRIVERS SDAS017C – DECEMBER 1982 – REVISED JANUARY 1995 SN54ALS832A, SN54AS832B . . . J PACKAGE SN74ALS832A, SN74AS832B . . . DW OR N PACKAGE (TOP VIEW) High Capacitive-Drive Capability ′ALS832A Has Typical Delay Time of 4.8 ns (CL = 50 pF) and Typical Power Dissipation of 4.5 mW Per Gate ′AS832B Has Typical Delay Time of 3.
PAGE 2
SN54ALS832A, SN54AS832B, SN74ALS832A, SN74AS832B HEX 2-INPUT OR DRIVERS SDAS017C – DECEMBER 1982 – REVISED JANUARY 1995 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
SN54ALS832A, SN54AS832B, SN74ALS832A, SN74AS832B HEX 2-INPUT OR DRIVERS SDAS017C – DECEMBER 1982 – REVISED JANUARY 1995 switching characteristics (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX† SN54ALS832A SN74ALS832A TO (OUTPUT) A or B MIN MAX MIN MAX 1 13 2 9 1 11 1 8 Y UNIT ns † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
PAGE 4
SN54ALS832A, SN54AS832B, SN74ALS832A, SN74AS832B HEX 2-INPUT OR DRIVERS SDAS017C – DECEMBER 1982 – REVISED JANUARY 1995 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VOH SN54AS832B TYP† MAX TEST CONDITIONS VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = –18 mA IOH = – 2 mA VCC = 4.5 V IOH = – 3 mA IOH = – 40 mA VOL VCC = 4 4.5 5V II IIH VCC = 5.5 V, VCC = 5.5 V, IIL IO‡ VCC = 5.5 V, VCC = 5.5 V, ICCH ICCL VCC = 5.5 V, VCC = 5.
PAGE 5
SN54ALS832A, SN54AS832B, SN74ALS832A, SN74AS832B HEX 2-INPUT OR DRIVERS SDAS017C – DECEMBER 1982 – REVISED JANUARY 1995 PARAMETER MEASUREMENT INFORMATION SERIES 54ALS/74ALS AND 54AS/74AS DEVICES 7V RL = R1 = R2 VCC S1 RL R1 Test Point From Output Under Test CL (see Note A) From Output Under Test RL Test Point From Output Under Test CL (see Note A) CL (see Note A) LOAD CIRCUIT FOR BI-STATE TOTEM-POLE OUTPUTS LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS 3.
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74AS832BDWR Package Package Pins Type Drawing SOIC DW 20 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2000 330.0 24.4 Pack Materials-Page 1 10.8 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 13.0 2.7 12.0 24.
PAGE 10
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AS832BDWR SOIC DW 20 2000 367.0 367.0 45.
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.