Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Inverter Inverter 74AUP SOT 23 5

N.C. V

GND

DBV PACKAGE

(TOP VIEW)

GND

A N.C.

N.C.

DRY PACKAGE

(TOP VIEW)

N.C. V

GND

DCK PACKAGE

(TOP VIEW)

N.C. V

GND

DRL PACKAGE

(TOP VIEW)

GND Y

N.C.

DSF PACKAGE

(TOP VIEW)

YZP PACKAGE

(TOP VIEW)

YFP PACKAGE

(TOP VIEW)

GND

DNU

GND

SN74AUP1G14

www.ti.com

SCES578I –JUNE 2003–REVISED MAY 2010

LOW-POWER SINGLE SCHMITT-TRIGGER INVERTER

Check for Samples: SN74AUP1G14

FEATURES

• Available in the Texas Instruments NanoStar™ • Wide Operating V

Range of 0.8 V to 3.6 V

Package

• Optimized for 3.3-V Operation

• Low Static-Power Consumption

• 3.6-V I/O Tolerant to Support Mixed-Mode

= 0.9 mA Max)

Signal Operation

• Low Dynamic-Power Consumption

• t

= 4.9 ns Max at 3.3 V

= 4.4 pF Typ at 3.3 V)

• Suitable for Point-to-Point Applications

• Low Input Capacitance (C

= 1.5 pF Typ)

• Latch-Up Performance Exceeds 100 mA Per

• Low Noise – Overshoot and Undershoot

JESD 78, Class II

<10% of V

• ESD Performance Tested Per JESD 22

• I

off

Supports Partial-Power-Down Mode

– 2000-V Human-Body Model

Operation

(A114-B, Class II)

• Includes Schmitt-Trigger Inputs

– 1000-V Charged-Device Model (C101)

N.C. – No internal connection.

DNU – Do not use

See mechancial drawings for dimensions.

DESCRIPTION/ORDERING INFORMATION

The AUP family is TI's premier solution to the industry's low power needs in battery-powered portable

applications. This family ensures a very low static and dynamic power consumption across the entire V

range

of 0.8 V to 3.6 V, resulting in an increased battery life. This product also maintains excellent signal integrity (see

Figure 1 and Figure 2).

This device functions as an independent gate with Schmitt-trigger inputs, which allows for slow input transition

and better switching-noise immunity at the input.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (24 pages)

PAGE 1
SN74AUP1G14 www.ti.com SCES578I – JUNE 2003 – REVISED MAY 2010 LOW-POWER SINGLE SCHMITT-TRIGGER INVERTER Check for Samples: SN74AUP1G14 FEATURES 1 • • • • • • • Available in the Texas Instruments NanoStar™ Package Low Static-Power Consumption (ICC = 0.9 mA Max) Low Dynamic-Power Consumption (Cpd = 4.4 pF Typ at 3.3 V) Low Input Capacitance (CI = 1.
PAGE 2
SN74AUP1G14 SCES578I – JUNE 2003 – REVISED MAY 2010 www.ti.com Static-Power Consumption Dynamic-Power Consumption (µA) (pF) 100% 100% 80% 80% Switching Characteristics at 25 MHz† 3.5 3 60% 3.3-V Logic† 40% 40% Voltage − V 60% 3.3-V LVC Logic† AUP 0% † Input 2 1.5 1 Output 0.5 20% 20% 2.5 0 −0.5 AUP 0% Single, dual, and triple gates 0 5 10 15 20 25 30 Time − ns 35 40 45 † AUP1G08 data at C = 15 pF L Figure 1. AUP – The Lowest-Power Family Figure 2.
PAGE 3
SN74AUP1G14 www.ti.com SCES578I – JUNE 2003 – REVISED MAY 2010 ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range –0.5 4.6 V VI Input voltage range (2) –0.5 4.6 V VO Voltage range applied to any output in the high-impedance or power-off state (2) –0.5 4.6 V –0.5 VCC + 0.
PAGE 4
SN74AUP1G14 SCES578I – JUNE 2003 – REVISED MAY 2010 www.ti.com ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VT+ Positive-going input threshold voltage VT– Negative-going input threshold voltage ΔVT Hysteresis (VT+ – VT–) VOH MIN MAX 0.8 V 0.3 1.1 V 0.53 0.6 0.3 0.6 0.9 0.53 0.9 1.4 V 0.74 1.11 0.74 1.11 1.65 V 0.91 1.29 0.91 1.29 2.3 V 1.37 1.77 1.37 1.77 2.29 3V 1.88 2.29 1.88 0.
PAGE 5
SN74AUP1G14 www.ti.com SCES578I – JUNE 2003 – REVISED MAY 2010 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, CL = 5 pF (unless otherwise noted) (see Figure 3 and Figure 4) PARAMETER FROM (INPUT) TO (OUTPUT) MIN TYP 0.8 V tpd A Y TA = –40°C to 85°C TA = 25°C VCC MAX MIN UNIT MAX 16.3 1.2 V ± 0.1 V 4.2 6.9 11.7 0.9 15 1.5 V ± 0.1 V 3.7 5.2 8.4 1.7 10.7 1.8 V ± 0.15 V 3.3 4.4 6.9 1.9 8.5 2.5 V ± 0.2 V 2.8 3.5 4.8 1.8 6.1 3.3 V ± 0.
PAGE 6
SN74AUP1G14 SCES578I – JUNE 2003 – REVISED MAY 2010 www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, CL = 30 pF (unless otherwise noted) (see Figure 3 and Figure 4) PARAMETER FROM (INPUT) TO (OUTPUT) MIN 0.8 V tpd A Y TA = –40°C to 85°C TA = 25°C VCC TYP UNIT MAX MIN MAX 25.7 1.2 V ± 0.1 V 7.4 11.2 17.1 4.5 20.5 1.5 V ± 0.1 V 6.1 8.5 12.3 4.6 14.7 1.8 V ± 0.15 V 5.4 7.2 10.3 4.1 12 2.5 V ± 0.2 V 4.7 5.7 7.4 3.7 8.8 3.
PAGE 7
SN74AUP1G14 www.ti.com SCES578I – JUNE 2003 – REVISED MAY 2010 PARAMETER MEASUREMENT INFORMATION (Propagation Delays, Setup and Hold Times, and Pulse Width) From Output Under Test CL (see Note A) 1 MΩ LOAD CIRCUIT CL VM VI VCC = 0.8 V VCC = 1.2 V ± 0.1 V VCC = 1.5 V ± 0.1 V VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.
PAGE 8
SN74AUP1G14 SCES578I – JUNE 2003 – REVISED MAY 2010 www.ti.com PARAMETER MEASUREMENT INFORMATION (Enable and Disable Times) 2 × VCC S1 5 kΩ From Output Under Test GND CL (see Note A) 5 kΩ TEST S1 tPLZ/tPZL tPHZ/tPZH 2 × VCC GND LOAD CIRCUIT CL VM VI V∆ VCC = 0.8 V VCC = 1.2 V ± 0.1 V VCC = 1.5 V ± 0.1 V VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.3 V 5, 10, 15, 30 pF VCC/2 VCC 0.1 V 5, 10, 15, 30 pF VCC/2 VCC 0.1 V 5, 10, 15, 30 pF VCC/2 VCC 0.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.com 25-Jul-2013 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production.
PAGE 11
PACKAGE MATERIALS INFORMATION www.ti.com 7-Jun-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ SN74AUP1G14DBVR SOT-23 3000 180.0 8.4 DBV 5 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.23 3.17 1.37 4.0 8.0 Q3 SN74AUP1G14DBVT SOT-23 DBV 5 250 180.0 8.4 3.23 3.17 1.37 4.0 8.0 Q3 SN74AUP1G14DCKR SC70 DCK 5 3000 178.0 9.2 2.4 2.4 1.22 4.0 8.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 7-Jun-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AUP1G14DBVR SOT-23 DBV 5 3000 202.0 201.0 28.0 SN74AUP1G14DBVT SOT-23 DBV 5 250 202.0 201.0 28.0 SN74AUP1G14DCKR SC70 DCK 5 3000 180.0 180.0 18.0 SN74AUP1G14DCKR SC70 DCK 5 3000 205.0 200.0 33.0 SN74AUP1G14DCKT SC70 DCK 5 250 180.0 180.0 18.0 SN74AUP1G14DCKT SC70 DCK 5 250 205.0 200.0 33.
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
D: Max = 0.79 mm, Min = 0.73 mm E: Max = 0.79 mm, Min = 0.
PAGE 24
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.