Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Buffer, driver US 8

DCU PACKAGE

(TOP VIEW)

3 6

1Y2Y

1OE

GND

2OE1A

The exposed center pad, if used, must be connected

only as a secondary GND or left electrically open.

2OE

GND

1OE

RSE PACKAGE

(TOP VIEW)

3 6

1OE

GND

2OE

DQE PACKAGE

(TOP VIEW)

1OE

GND

2OE

YFP OR YZP PACKAGE

(TOP VIEW)

2 7

A1 A2

B1 B2

C1 C2

D1 D2

SN74AUP2G126

www.ti.com

SCES687D –JANUARY 2007–REVISED DECEMBER 2009

LOW-POWER DUAL BUS BUFFER GATE WITH 3-STATE OUTPUTS

Check for Samples: SN74AUP2G126

FEATURES

• Available in the Texas Instruments NanoStar™ • Wide Operating V

Range of 0.8 V to 3.6 V

Package

• Optimized for 3.3-V Operation

• Low Static-Power Consumption

• 3.6-V I/O Tolerant to Support Mixed-Mode

= 0.9 μA Max)

Signal Operation

• Low Dynamic-Power Consumption

• t

= 9.9 ns Max at 3.3 V

= 4 pF Typ at 3.3 V)

• Suitable for Point-to-Point Applications

• Low Input Capacitance (C

= 1.5 pF Typ)

• Latch-Up Performance Exceeds 100 mA Per

• Low Noise – Overshoot and Undershoot

JESD 78, Class II

<10% of V

• ESD Performance Tested Per JESD 22

• Input-Disable Feature Allows Floating Input

– 2000-V Human-Body Model

Conditions

(A114-B, Class II)

• I

off

Supports Partial-Power-Down Mode

– 1000-V Charged-Device Model (C101)

Operation

• Input Hysteresis Allows Slow Input Transition

and Better Switching Noise Immunity at Input

See mechanical drawings for dimensions.

DESCRIPTION/ORDERING INFORMATION

The AUP family is TI's premier solution to the industry's low-power needs in battery-powered portable

applications. This family ensures a very low static and dynamic power consumption across the entire V

range

of 0.8 V to 3.6 V, resulting in an increased battery life. This product also maintains excellent signal integrity (see

Figure 1 and Figure 2).

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (23 pages)

PAGE 1
SN74AUP2G126 www.ti.com SCES687D – JANUARY 2007 – REVISED DECEMBER 2009 LOW-POWER DUAL BUS BUFFER GATE WITH 3-STATE OUTPUTS Check for Samples: SN74AUP2G126 FEATURES 1 • • • • • • • • Available in the Texas Instruments NanoStar™ Package Low Static-Power Consumption (ICC = 0.9 μA Max) Low Dynamic-Power Consumption (Cpd = 4 pF Typ at 3.3 V) Low Input Capacitance (Ci = 1.
PAGE 2
SN74AUP2G126 SCES687D – JANUARY 2007 – REVISED DECEMBER 2009 Static-Power Consumption ( mA) www.ti.com Switching Characteristics Dynamic-Power Consumption at 25 MHz† (pF) 100% 100% 80% 80% 3.5 60% 60% 3.3-V 3.3-V LVC † Logic 40% 40% Voltage - V 3 † Logic 2.5 Input 2 Output 1.5 1 0.5 20% 20% AUP 0% † 0 AUP 0% -0.5 Single, dual, and triple gates 0 † Figure 1. AUP – The Lowest Power Family 5 10 15 20 25 Time - ns 30 35 40 45 AUP1G08 data at CL = 15 pF Figure 2.
PAGE 3
SN74AUP2G126 www.ti.com SCES687D – JANUARY 2007 – REVISED DECEMBER 2009 LOGIC DIAGRAMS (POSITIVE LOGIC) DCU, DQE, YFP, and YZP Packages 1 1OE 2 6 1A 1Y 7 2OE 5 3 2A 2Y RSE Package 7 1OE 6 2 1A 1Y 1 2OE 3 5 2A 2Y ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range –0.5 4.6 V VI Input voltage range (2) –0.5 4.6 V VO Voltage range applied to any output in the high-impedance or power-off state (2) –0.
PAGE 4
SN74AUP2G126 SCES687D – JANUARY 2007 – REVISED DECEMBER 2009 www.ti.com RECOMMENDED OPERATING CONDITIONS (1) VCC Supply voltage VCC = 0.8 V VIH High-level input voltage VCC = 1.1 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V MIN MAX 0.8 3.6 VCC 3.6 0.65 × VCC 3.6 1.6 3.6 2 3.6 VCC = 0.
PAGE 5
SN74AUP2G126 www.ti.com SCES687D – JANUARY 2007 – REVISED DECEMBER 2009 ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VOH TEST CONDITIONS VCC MIN 0.8 V to 3.6 V VCC – 0.1 VCC – 0.1 1.1 V 0.75 × VCC 0.7 × VCC IOH = –1.7 mA 1.4 V 1.11 1.03 IOH = –1.9 mA 1.65 V 1.32 1.3 2.05 1.97 2.3 V IOH = –2.7 mA 3V IOH = –4 mA IOL = 20 μA 1.9 1.85 2.72 2.67 2.6 2.55 0.8 V to 3.6 V MAX UNIT V 0.1 0.1 0.
PAGE 6
SN74AUP2G126 SCES687D – JANUARY 2007 – REVISED DECEMBER 2009 www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, CL = 5 pF (unless otherwise noted) (see Figure 3 and Figure 4) PARAMETER FROM (INPUT) TO (OUTPUT) VCC TA = 25°C MIN 0.8 V tpd A Y OE Y OE Y MIN MAX UNIT 19.2 0.5 7.5 17.9 0.5 18.7 1.5 V ± 0.1 V 0.6 5.2 10.8 0.5 12.4 1.8 V ± 0.15 V 0.8 4.1 8.1 0.5 9.7 2.5 V ± 0.2 V 1.1 2.9 5 0.5 6.5 3.3 V ± 0.3 V 0.5 3 9.5 0.5 9.
PAGE 7
SN74AUP2G126 www.ti.com SCES687D – JANUARY 2007 – REVISED DECEMBER 2009 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 3 and Figure 4) PARAMETER FROM (INPUT) TO (OUTPUT) VCC TA = 25°C MIN 0.8 V tpd A Y OE Y OE Y MIN MAX 23.4 UNIT 26.2 0.5 9.7 22.7 0.5 1.5 V ± 0.1 V 1.7 4.6 13.6 0.5 15 1.8 V ± 0.15 V 1.7 5.4 10.2 0.5 11.7 2.5 V ± 0.2 V 1.7 3.9 6.5 0.5 7.9 3.3 V ± 0.3 V 0.5 3.7 8.4 0.
PAGE 8
SN74AUP2G126 SCES687D – JANUARY 2007 – REVISED DECEMBER 2009 www.ti.com OPERATING CHARACTERISTICS TA = 25°C PARAMETER TEST CONDITIONS Outputs enabled Cpd Power dissipation capacitance Outputs disabled 8 f = 10 MHz f = 10 MHz Submit Documentation Feedback VCC TYP 0.8 V 3.8 1.2 V ± 0.1 V 3.7 1.5 V ± 0.1 V 3.7 1.8 V ± 0.15 V 3.7 2.5 V ± 0.2 V 3.9 3.3 V ± 0.3 V 4 0.8 V 0 1.2 V ± 0.1 V 0 1.5 V ± 0.1 V 0 1.8 V ± 0.15 V 0 2.5 V ± 0.2 V 0 3.3 V ± 0.
PAGE 9
SN74AUP2G126 www.ti.com SCES687D – JANUARY 2007 – REVISED DECEMBER 2009 PARAMETER MEASUREMENT INFORMATION (Propagation Delays, Setup and Hold Times, and Pulse Width) From Output Under Test CL (see Note A) 1 MW LOAD CIRCUIT CL VM VI VCC = 0.8 V VCC = 1.2 V ± 0.1 V VCC = 1.5 V ± 0.1 V VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.
PAGE 10
SN74AUP2G126 SCES687D – JANUARY 2007 – REVISED DECEMBER 2009 www.ti.com PARAMETER MEASUREMENT INFORMATION (Enable and Disable Times) 2 ´ VCC S1 5 kW From Output Under Test GND CL (see Note A) 5 kW TEST S1 tPLZ/tPZL tPHZ/tPZH 2 ´ VCC GND LOAD CIRCUIT CL VM VI VD VCC = 0.8 V VCC = 1.2 V ± 0.1 V VCC = 1.5 V ± 0.1 V VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.3 V 5, 10, 15, 30 pF VCC/2 VCC 0.1 V 5, 10, 15, 30 pF VCC/2 VCC 0.1 V 5, 10, 15, 30 pF VCC/2 VCC 0.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 8-Sep-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74AUP2G126DCUR US8 DCU 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.0 Q3 SN74AUP2G126DQER X2SON DQE 8 5000 180.0 8.4 1.2 1.6 0.55 4.0 8.0 Q1 SN74AUP2G126RSER UQFN RSE 8 5000 180.0 8.4 1.6 1.6 0.66 4.0 8.
PAGE 14
PACKAGE MATERIALS INFORMATION www.ti.com 8-Sep-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AUP2G126DCUR US8 DCU 8 3000 202.0 201.0 28.0 SN74AUP2G126DQER X2SON DQE 8 5000 202.0 201.0 28.0 SN74AUP2G126RSER UQFN RSE 8 5000 202.0 201.0 28.0 SN74AUP2G126YFPR DSBGA YFP 8 3000 220.0 220.0 35.0 SN74AUP2G126YZPR DSBGA YZP 8 3000 220.0 220.0 35.
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
D: Max = 1.918 mm, Min =1.858 mm E: Max = 0.918 mm, Min =0.
PAGE 22
D: Max = 1.59 mm, Min = 1.53 mm E: Max = 0.79 mm, Min = 0.
PAGE 23
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.