Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsSN74AVC6T622RGYR

FEATURES

DNU

CCA

GND

DIR2

CCB

DIR1

GND

DIR(345)

DNU

CCA

GND

DIR2

Exposed

Center

Pad

DIR1

CCB

GND

ZXY PACKAGE

(TOP VIEW)

BA C D

DESCRIPTION/ORDERING INFORMATION

SN74AVC6T622

www.ti.com

............................................................................................................................................. SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009

AUDIO CODEC AC ' 97 VOLTAGE-TRANSLATION TRANSCEIVER

• Voltage-Level Transceiver for Interfacing 1.8 V • Latch-Up Performance Exceeds 100 mA Per

Audio Codec (AC'97) Controllers With 3.3 V JESD 78, Class II

AC'97 Codec Links

• ESD Protection Exceeds JESD 22

• Configurable I/O Switching Levels With

– 7000-V Human-Body Model (A114-A)

Dual-Supply Pins Operating Over Full 1.2-V to

– 200-V Machine Model (A115-A)

3.6-V Power-Supply Range

– 1500-V Charged-Device Model (C101)

• For Low-Power Operation, A and B Ports Are

Placed in High-Impedance State When Either

Supply Voltage Is Switched Off

PW PACKAGE RGY PACKAGE

(TOP VIEW) (BOTTOM VIEW)

The exposed center pad, if used, must be

connected as a secondary ground or left

electrically open.

TERMINAL ASSIGNMENTS

(20-Ball ZXY Package)

A B C D

5 V

CCA

DIR2 DIR1 V

CCB

4 A5 A4 B4 B5

3 A6 GND GND B6

2 A3 A1 B2 B1

1 DNU

(1)

A2 DIR(345) B3

(1) DNU – Do not use; should be left unconnected

The SN74AVC6T622 is a voltage-level transceiver for interfacing 1.8 V audio codec (AC ' 97) controllers, the

audio/analog modem functionality found in personal computers, with 3.3V AC ' 97 codec links. With the digital

switching levels of today ' s AC ' 97 codecs lowering to 1.8-V logic levels, the SN74AVC6T622 device can be used

to bridge the gap between legacy 3.3-V AC ' 97 codecs and AC ' 97 controllers that are now operating at 1.8 V. The

6-bit wide SN74AVC6T622 device complies with the AC ' 97 electrical interface (both levels and timing)

specification.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (25 pages)

PAGE 1
SN74AVC6T622 www.ti.com.............................................................................................................................................
PAGE 2
SN74AVC6T622 SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009............................................................................................................................................. www.ti.com Two supply-voltage pins allow the A-port and B-port input switching thresholds to be configured separately. The A port is designed to track VCCA, while the B port is designed to track VCCB. VCCA and VCCB can accept any supply voltage from 1.2 V to 3.6 V.
PAGE 3
SN74AVC6T622 www.ti.com............................................................................................................................................. SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009 TERMINAL FUNCTIONS ZXY BALL NO. RGY, PW PIN NO.
PAGE 4
SN74AVC6T622 SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009............................................................................................................................................. www.ti.
PAGE 5
SN74AVC6T622 www.ti.com.............................................................................................................................................
PAGE 6
SN74AVC6T622 SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009............................................................................................................................................. www.ti.com ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) VCCA VCCB Supply voltage range VI Input voltage range (2) MIN MAX –0.5 4.6 I/O ports (A port) –0.5 4.6 I/O ports (B port) –0.5 4.6 Control inputs –0.5 4.6 A port –0.5 4.6 B port –0.
PAGE 7
SN74AVC6T622 www.ti.com............................................................................................................................................. SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009 RECOMMENDED OPERATING CONDITIONS (1) (2) (3) VCCI VCCO MIN MAX UNIT VCCA Supply voltage 1.2 3.6 V VCCB Supply voltage 1.2 3.6 V VIH High-level input voltage VIL Low-level input voltage VI Input voltage VI/O Input/output voltage IOH All inputs (4) All inputs 2 V 1.
PAGE 8
SN74AVC6T622 SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009............................................................................................................................................. www.ti.com ELECTRICAL CHARACTERISTICS (1) (2) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCCB 1.2 V to 3.6 V 1.2 V to 3.6 V 1.2 V 1.2 V 1.4 V 1.4 V 1.05 1.65 V 1.65 V 1.2 IOH = –4 mA 2.3 V 2.3 V 1.75 IOH = –8 mA 3V 3V 2.
PAGE 9
SN74AVC6T622 www.ti.com............................................................................................................................................. SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009 OUTPUT SLEW RATES (1) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER FROM VCCA = 1.8 V ± 0.15 V, VCCB = 3 V ± 0.3 V TO MIN (1) (2) UNIT MAX tr 10% 90% 3 (2) ns tf 90% 10% 3 (2) ns Values are characterized, but not production tested.
PAGE 10
SN74AVC6T622 SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009............................................................................................................................................. www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 1.8 V ± 0.15 V (see Figure 2) PARAMETER tpd (1) FROM TO (INPUT) (OUTPUT) VCCB = 1.2 V TYP VCCB = 1.5 V ± 0.1 V VCCB = 1.8 V ± 0.15 V VCCB = 2.5 V ± 0.2 V VCCB = 3 V ± 0.3 V VCCB = 3.3 V ± 0.
PAGE 11
SN74AVC6T622 www.ti.com............................................................................................................................................. SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 3.3 V ± 0.3 V (see Figure 2) PARAMETER FROM (INPUT) TO (OUTPUT) A B tpd (1) VCCB = 1.2 V VCCB = 1.5 V ± 0.1 V VCCB = 1.8 V ± 0.15 V VCCB = 2.5 V ± 0.2 V VCCB = 3 V ± 0.
PAGE 12
SN74AVC6T622 SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009............................................................................................................................................. www.ti.com MAXIMUM FREQUENCY AND OUTPUT SKEW over recommended operating free-air temperature range, VCCA = 2.5 V ± 0.2 V (see Figure 2) PARAMETER Clock fmax Data Channeltsk(o) tochannel VCCB = 1.2 V VCCB = 1.5 V ± 0.1 V VCCB = 1.8 V ± 0.15 V VCCB = 2.5 V ± 0.2 V VCCB = 3 V ± 0.3 V VCCB = 3.3 V ± 0.
PAGE 13
SN74AVC6T622 www.ti.com............................................................................................................................................. SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009 OPERATING CHARACTERISTICS TA = 25°C PARAMETER CpdA (1) CpdB (1) (1) A-port input, B-port output B-port input, A-port output A-port input, B-port output B-port input, A-port output TEST CONDITIONS VCCA = VCCB = 1.2 V VCCA = VCCB = 1.5 V VCCA = VCCB = 1.8 V VCCA = VCCB = 2.
PAGE 14
SN74AVC6T622 SCES706A – SEPTEMBER 2008 – REVISED MARCH 2009............................................................................................................................................. www.ti.com PARAMETER MEASUREMENT INFORMATION 2 × VCCO RL From Output Under Test S1 Open GND CL (see Note A) TEST S1 tpd tPLZ/tPZL tPHZ/tPZH Open 2 × VCCO GND RL LOAD CIRCUIT VCCO CL RL VTP 1.5 V ± 0.1 V 1.8 V ± 0.15 V 2.5 V ± 0.2 V 3.3 V ± 0.3 V 15 pF 15 pF 15 pF 15 pF 2 kΩ 2 kΩ 2 kΩ 2 kΩ 0.
PAGE 15
PACKAGE OPTION ADDENDUM www.ti.
PAGE 16
PACKAGE OPTION ADDENDUM www.ti.com 20-May-2013 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties.
PAGE 17
PACKAGE MATERIALS INFORMATION www.ti.com 5-Feb-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74AVC6T622PWR SN74AVC6T622RGYR SN74AVC6T622ZXYR Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TSSOP PW 20 2000 330.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 VQFN RGY 20 3000 330.0 12.4 3.8 4.8 1.6 8.0 12.0 Q1 ZXY 20 2500 330.0 12.4 2.8 3.3 1.0 4.0 12.
PAGE 18
PACKAGE MATERIALS INFORMATION www.ti.com 5-Feb-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AVC6T622PWR TSSOP PW 20 2000 367.0 367.0 38.0 SN74AVC6T622RGYR VQFN RGY 20 3000 367.0 367.0 35.0 SN74AVC6T622ZXYR BGA MICROSTAR JUNIOR ZXY 20 2500 338.1 338.1 20.
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
PAGE 25
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.