Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Inverter Inverter 74HC TSSOP 14

SN54HC05, SN74HC05

HEX INVERTERS

WITH OPEN-DRAIN OUTPUTS

SCLS080D – MARCH 1984 – REVISED AUGUST 2003

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Wide Operating Voltage Range of 2 V to 6 V

Outputs Can Drive Up To 10 LSTTL Loads

Low Power Consumption, 20-µA Max I

Typical t

= 8 ns

±4-mA Output Drive at 5 V

Low Input Current of 1 µA Max

GND

SN54HC05 ...J OR W PACKAGE

SN74HC05 . . . D, DB, N, NS, OR PW PACKAGE

(TOP VIEW)

3212019

910111213

GND

SN54HC05 . . . FK PACKAGE

(TOP VIEW)

NC – No internal connection

description/ordering information

The ’HC05 devices contain six independent inverters. They perform the Boolean function

Y = A

in positive logic. The open-drain outputs require pullup resistors to perform correctly. They may be

connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

–40 C to 85 C

PDIP – N Tube of 25 SN74HC05N SN74HC05N

–40 C to 85 C

SOIC – D

Tube of 50 SN74HC05D

HC05

–40 C to 85 C

SOIC – D

Reel of 2500 SN74HC05DR

HC05

–40°C to 85°C

Reel of 250 SN74HC05DT

–40°C to 85°C

SOP – NS Reel of 2000 SN74HC05NSR HC05

SSOP – DB Reel of 2000 SN74HC05DBR HC05

TSSOP – PW

Reel of 2000 SN74HC05PWR

HC05

TSSOP – PW

Reel of 250 SN74HC05PWT

HC05

–55 C to 125 C

CDIP – J Tube of 25 SNJ54HC05J SNJ54HC05J

–55

C to 125

CFP – W Tube of 150 SNJ54HC05W SNJ54HC05W

LCCC – FK Tube of 55 SNJ54HC05FK SNJ54HC05FK

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are

available at www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications o

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

On products compliant to MIL-PRF-38535, all parameters are tested

unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

Summary of content (18 pages)

PAGE 1
SN54HC05, SN74HC05 HEX INVERTERS WITH OPEN-DRAIN OUTPUTS SCLS080D – MARCH 1984 – REVISED AUGUST 2003 D D D Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 20-µA Max ICC D D D Typical tpd = 8 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max SN54HC05 . . .
PAGE 2
SN54HC05, SN74HC05 HEX INVERTERS WITH OPEN-DRAIN OUTPUTS SCLS080D – MARCH 1984 – REVISED AUGUST 2003 FUNCTION TABLE (each inverter) INPUT A OUTPUT Y H L L H logic diagram (positive logic) A Y absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . .
PAGE 3
SN54HC05, SN74HC05 HEX INVERTERS WITH OPEN-DRAIN OUTPUTS SCLS080D – MARCH 1984 – REVISED AUGUST 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER IOH VOL II ICC TEST CONDITIONS VI = VIH or VIL, VCC VO = VCC TA = 25°C TYP MAX SN54HC05 SN74HC05 MIN MIN MAX MAX UNIT µA 6V 0.01 0.5 10 5 2V 0.002 0.1 0.1 0.1 IOL = 20 µA A 4.5 V 0.001 0.1 0.1 0.1 6V 0.001 0.1 0.1 0.1 IOL = 4 mA IOL = 5.2 mA 4.5 V 0.17 0.
PAGE 4
SN54HC05, SN74HC05 HEX INVERTERS WITH OPEN-DRAIN OUTPUTS SCLS080D – MARCH 1984 – REVISED AUGUST 2003 PARAMETER MEASUREMENT INFORMATION VCC RL = 1 kΩ From Output Under Test VCC Test Point Input 50% 0V CL = 50 pF (see Note A) tPLH In-Phase Output LOAD CIRCUIT Input 50% 10% 90% VCC 50% 10% 0 V 90% tr 50% tPHL 90% 10% tPHL Out-of-Phase Output 90% tf VOLTAGE WAVEFORM INPUT RISE AND FALL TIMES tPLH 50% 10% 10% VOH 50% 10% V OL tf VOH VOL tf VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT T
PAGE 5
PACKAGE OPTION ADDENDUM www.ti.
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device.
PAGE 8
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74HC05DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HC05DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HC05DR SOIC D 14 2500 330.0 16.8 6.5 9.5 2.3 8.0 16.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74HC05DR SOIC D 14 2500 367.0 367.0 38.0 SN74HC05DR SOIC D 14 2500 333.2 345.9 28.6 SN74HC05DR SOIC D 14 2500 364.0 364.0 27.0 SN74HC05DRG4 SOIC D 14 2500 333.2 345.9 28.6 SN74HC05DRG4 SOIC D 14 2500 367.0 367.0 38.0 SN74HC05DT SOIC D 14 250 367.0 367.0 38.
PAGE 10
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.