Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Inverter Inverter 74HCT TSSOP 14

SN54HCT04, SN74HCT04

HEX INVERTERS

SCLS042D – JULY 1986 – REVISED JULY 2003

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Operating Voltage Range of 4.5 V to 5.5 V

Outputs Can Drive Up To 10 LSTTL Loads

Low Power Consumption, 20-µA Max I

Typical t

= 13 ns

±4-mA Output Drive at 5 V

Low Input Current of 1 µA Max

Inputs Are TTL-Voltage Compatible

GND

SN54HCT04 ...J PACKAGE

SN74HCT04 . . . D, N, NS, OR PW PACKAGE

(TOP VIEW)

3212019

910111213

GND

SN54HCT04 . . . FK PACKAGE

(TOP VIEW)

NC – No internal connection

description/ordering information

These devices contain six independent inverters. They perform the Boolean function Y = A in positive logic.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP – N Tube of 25 SN74HCT04N SN74HCT04N

Tube of 50 SN74HCT04D

SOIC – D

Reel of 2500 SN74HCT04DR

HCT04

40°Cto85°C

Reel of 250 SN74HCT04DT

–

40°C

85°C

SOP – NS Reel of 2000 SN74HCT04NSR HCT04

Tube of 90 SN74HCT04PW

TSSOP – PW

Reel of 2000 SN74HCT04PWR

HT04

Reel of 250 SN74HCT04PWT

55°Cto125°C

CDIP – J Tube of 25 SNJ54HCT04J SNJ54HCT04J

–

55°C

125°C

LCCC – FK Tube of 55 SNJ54HCT04FK SNJ54HCT04FK

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are

available at www.ti.com/sc/package.

FUNCTION TABLE

(each inverter)

INPUT

OUTPUT

H L

L H

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

On products compliant to MIL-PRF-38535, all parameters are tested

unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

Summary of content (20 pages)

PAGE 1
SN54HCT04, SN74HCT04 HEX INVERTERS SCLS042D – JULY 1986 – REVISED JULY 2003 D D D Operating Voltage Range of 4.5 V to 5.5 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 20-µA Max ICC D D D D Typical tpd = 13 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Inputs Are TTL-Voltage Compatible SN54HCT04 . . . J PACKAGE SN74HCT04 . . .
PAGE 2
SN54HCT04, SN74HCT04 HEX INVERTERS SCLS042D – JULY 1986 – REVISED JULY 2003 logic diagram (positive logic) A Y absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
SN54HCT04, SN74HCT04 HEX INVERTERS SCLS042D – JULY 1986 – REVISED JULY 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC VOH VI = VIH or VIL IOH = –20 µA IOH = –4 mA 45V 4.5 VOL VI = VIH or VIL IOL = 20 µA IOL = 4 mA 45V 4.5 II ICC VI = VCC or 0 VI = VCC or 0, ∆ICC† MIN MIN MAX SN74HCT04 MIN 4.4 4.499 4.4 4.4 4.3 3.7 3.84 5.5 V 4.5 V to 5.5 V MAX UNIT V 0.001 0.1 0.1 0.1 0.17 0.26 0.
PAGE 4
SN54HCT04, SN74HCT04 HEX INVERTERS SCLS042D – JULY 1986 – REVISED JULY 2003 PARAMETER MEASUREMENT INFORMATION From Output Under Test 3V Test Point Input 1.3 V 1.3 V 0V CL = 50 pF (see Note A) tPLH In-Phase Output LOAD CIRCUIT 1.3 V 10% tPHL 90% 90% tr Input 1.3 V 0.3 V 2.7 V tPHL 3V 2.7 V 1.3 V 0.3 V 0 V tr Out-of-Phase Output 90% tf VOLTAGE WAVEFORM INPUT RISE AND FALL TIMES VOH 1.3 V 10% V OL tf tPLH 1.3 V 10% tf 1.
PAGE 5
PACKAGE OPTION ADDENDUM www.ti.
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 18-Oct-2013 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) SNJ54HCT04J (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs.
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74HCT04DR SOIC D 14 2500 330.0 16.8 6.5 9.5 2.3 8.0 16.0 Q1 SN74HCT04DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HCT04DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.
PAGE 10
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74HCT04DR SOIC D 14 2500 364.0 364.0 27.0 SN74HCT04DR SOIC D 14 2500 367.0 367.0 38.0 SN74HCT04DR SOIC D 14 2500 333.2 345.9 28.6 SN74HCT04DRG4 SOIC D 14 2500 367.0 367.0 38.0 SN74HCT04DRG4 SOIC D 14 2500 333.2 345.9 28.6 SN74HCT04DT SOIC D 14 250 367.0 367.0 38.
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.