Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Inverter Inverter 74LS PDIP 14

 

  

    

SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

D Package Options Include Plastic

Small-Outline (D, NS), Shrink Small-Outline

(DB), and Ceramic Flat (W) Packages,

Ceramic Chip Carriers (FK), and Standard

Plastic (N) and Ceramic (J) DIPs

D Dependable Texas Instrument Quality and

Reliability

SN5405, SN54LS05, SN54S05 ...J PACKAGE

SN7405 ...N PACKAGE

SN74LS05 . . . D, DB, N, OR NS PACKAGE

SN74S05 . . . D, N, OR NS PACKAGE

(TOP VIEW)

GND

3212019

910111213

SN54LS05, SN54S05 . . . FK PACKAGE

(TOP VIEW)

GND

NC − No internal connection

SN54LS05, SN54S05 ...W PACKAGE

(TOP VIEW)

GND

description/ordering information

These devices contain six independent inverters. To perform correctly, the open-collector outputs require pullup

resistors. These devices may be connected to other open-collector outputs to implement active-low wired-OR

or active-high wire-AND functions. Open-collector devices often are used to generate high V

levels.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

SN7405N SN7405N

PDIP − N Tube

SN74LS05N SN74LS05N

PDIP − N

Tube

SN74S05N SN74S05N

Tube SN74LS05D

LS05

0°C to 70°C

SOIC − D

Tape and reel SN74LS05DR

LS05

0°C to 70°C SOIC − D

Tube SN74S05D

S05

Tape and reel SN74S05DR

S05

SOP − NS

Tape and reel

SN74LS05NSR 74LS05

SOP − NS Tape and reel

SN74S05NSR 74S05

SSOP − DB Tape and reel SN74LS05DBR LS05

CDIP − J

Tube

SNJ54LS05J SNJ54LS05J

CDIP − J Tube

SNJ54S05J SNJ54S05J

−55°C to 125°C

CDIP − W

Tube

SNJ54LS05W SNJ54LS05W

−55°C to 125°C CDIP − W Tube

SNJ54S05W SNJ54S05W

LCCC − FK

Tube

SNJ54LS05FK SNJ54LS05FK

LCCC − FK

Tube

SNJ54S05FK SNJ54S05FK

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design

guidelines are available at www.ti.com/sc/package.

The SN5405 is obsolete

nd no longer is supplie

   ! "#$ !  %#&'" ($)

(#"! "  !%$""! %$ *$ $!  $+! !#$!

!(( ,-) (#" %"$!!. ($!  $"$!!'- "'#($

$!.  '' %$$!)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

 %(#"! "%'  /0121 '' %$$! $ $!$(

#'$!! *$,!$ $()  '' *$ %(#"! %(#"

%"$!!. ($!  $"$!!'- "'#($ $!.  '' %$$!)

Summary of content (22 pages)

PAGE 1
The SN5405 is obsolete and no longer is supplied. D Package Options Include Plastic SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 D Dependable Texas Instrument Quality and Reliability 1A 1Y 2A 2Y 3A 3Y GND 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 6A 6Y 5A 5Y 4A 4Y 1A 2Y 2A 1 14 2 13 3 12 VCC 3A 3Y 4A 4 11 5 10 6 9 7 8 1Y 6A 6Y GND 5Y 5A 4Y SN54LS05, SN54S05 . . .
PAGE 2
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 FUNCTION TABLE (each inverter) INPUT A OUTPUT Y H L L H logic diagram (positive logic) 1A 1 2 1Y 2A 3 4 2Y 3A 5 6 3Y 4A 9 8 4Y 5A 11 10 5Y 6A 13 12 6Y Y=A Pin numbers shown are for the D, DB, J, N, and NS packages.
PAGE 3
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 schematic (each inverter) ’05 ’LS05 VCC 4 kΩ VCC 1.6 kΩ 8 kΩ 20 kΩ Input A Input A Output Y 1 kΩ Output Y 4.5 kΩ GND GND ’S05 VCC 2.8 kΩ 900 Ω Input A Output Y 250 Ω 500 Ω Resistor values shown are nominal.
PAGE 4
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 recommended operating conditions SN5405 SN7405 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 UNIT VCC VIH Supply voltage VIL VOH Low-level input voltage 0.8 0.8 High-level output voltage 5.5 5.
PAGE 5
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 recommended operating conditions SN54LS05 SN74LS05 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 UNIT VCC VIH Supply voltage VIL VOH Low-level input voltage 0.7 0.8 High-level output voltage 5.5 5.
PAGE 6
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 recommended operating conditions SN54S05 SN74S05 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 UNIT VCC VIH Supply voltage VIL VOH Low-level input voltage 0.8 0.8 High-level output voltage 5.5 5.
PAGE 7
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 PARAMETER MEASUREMENT INFORMATION SERIES 54/74 AND 54S/74S DEVICES VCC RL From Output Under Test Test Point CL (see Note A) LOAD CIRCUIT 3V 1.5 V Input 1.5 V 0V tPLH High-Level Pulse 1.5 V VOH In-Phase Output 1.5 V 1.5 V 1.5 V VOL tPHL tw Low-Level Pulse tPHL 1.5 V 1.5 V tPLH VOH Out-of-Phase Output 1.5 V 1.
PAGE 8
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 PARAMETER MEASUREMENT INFORMATION SERIES 54LS/74LS DEVICES VCC RL From Output Under Test Test Point CL (see Note A) LOAD CIRCUIT 3V 1.3 V Input 1.3 V 0V tPLH High-Level Pulse 1.3 V 1.3 V 1.3 V 1.3 V tPLH VOH Out-of-Phase Output 1.3 V 1.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.com 25-Jan-2012 (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SN74LS05DBR SSOP SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) DB 14 2000 330.0 16.4 8.2 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.6 2.5 12.0 16.0 Q1 SN74LS05DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74LS05NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LS05DBR SSOP DB 14 2000 367.0 367.0 38.0 SN74LS05DR SOIC D 14 2500 367.0 367.0 38.0 SN74LS05NSR SO NS 14 2000 367.0 367.0 38.0 SN74S05NSR SO NS 14 2000 367.0 367.0 38.
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 22
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.