Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Latch D type, Addressable Standard PDIP 16

SN54259, SN54LS259B, SN74259, SN74LS259B

8-BIT ADDRESSABLE LATCHES

SDLS086 – DECEMBER 1983 – REVISED MARCH 1988

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Summary of content (7 pages)

PAGE 1
SN54259, SN54LS259B, SN74259, SN74LS259B 8-BIT ADDRESSABLE LATCHES SDLS086 – DECEMBER 1983 – REVISED MARCH 1988 Copyright  1988, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
PAGE 2
SN54259, SN54LS259B, SN74259, SN74LS259B 8-BIT ADDRESSABLE LATCHES SDLS086 – DECEMBER 1983 – REVISED MARCH 1988 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PAGE 3
SN54259, SN74259 8-BIT ADDRESSABLE LATCHES SDLS086 – DECEMBER 1983 – REVISED MARCH 1988 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3
PAGE 4
SN54LS259B, SN74LS259B 8-BIT ADDRESSABLE LATCHES SDLS086 – DECEMBER 1983 – REVISED MARCH 1988 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PAGE 5
PACKAGE MATERIALS INFORMATION www.ti.com 23-Jul-2010 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74LS259BDR Package Package Pins Type Drawing SOIC D 16 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2500 330.0 16.4 Pack Materials-Page 1 6.5 B0 (mm) K0 (mm) P1 (mm) 10.3 2.1 8.0 W Pin1 (mm) Quadrant 16.
PAGE 6
PACKAGE MATERIALS INFORMATION www.ti.com 23-Jul-2010 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LS259BDR SOIC D 16 2500 333.2 345.9 28.
PAGE 7
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.