Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - multiplexers, demultiplexers SOIC 16 N

SN54LV4051A, SN74LV4051A

8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS

SCLS428H − MAY 1999 − REVISED APRIL 2005

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

D 2-V to 5.5-V V

Operation

D Support Mixed-Mode Voltage Operation on

All Ports

D High On-Off Output-Voltage Ratio

D Low Crosstalk Between Switches

D Individual Switch Controls

D Extremely Low Input Current

D Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

D ESD Protection Exceeds JESD 22

− 2000-V Human-Body Model (A114-A)

− 200-V Machine Model (A115-A)

− 1000-V Charged-Device Model (C101)

description/ordering information

These 8-channel CMOS analog multiplexers/

demultiplexers are designed for 2-V to 5.5-V V

operation.

The ’LV4051A devices handle both analog and

digital signals. Each channel permits signals with

amplitudes up to 5.5 V (peak) to be transmitted in

either direction.

Applications include signal gating, chopping,

modulation or demodulation (modem), and signal

multiplexing for analog-to-digital and digital-to-

analog conversion systems.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP − N Tube of 25 SN74LV4051AN SN74LV4051AN

QFN − RGY Reel of 1000 SN74LV4051ARGYR LW051A

SOIC D

Tube of 40 SN74LV4051AD

LV4051A

SOIC − D

Reel of 2500 SN74LV4051ADR

LV4051A

40°Cto85°C

SOP − NS Reel of 2000 SN74LV4051ANSR 74LV4051A

−40°C to 85°C

SSOP − DB Reel of 2000 SN74LV4051ADBR LW051A

Tube of 90 SN74LV4051APW

TSSOP − PW

Reel of 2000 SN74LV4051APWR

LW051A

TSSOP

Reel of 250 SN74LV4051APWT

LW051A

TVSOP − DGV Reel of 2000 SN74LV4051ADGVR LW051A

55°C to 125°C

CDIP − J Tube of 25 SNJ54LV4051AJ SNJ54LV4051AJ

−55°C to 125°C

CFP − W Tube of 150 SNJ54LV4051AW SNJ54LV4051AW

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines

are available at www.ti.com/sc/package.

UNLESS OTHERWISE NOTED this document contains PRODUCTION

DATA information current as of publication date. Products conform to

specifications per the terms of Texas Instruments standard warranty.

Production processing does not necessarily include testing of all

parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

COM

INH

GND

SN54LV4051A ...J OR W PACKAGE

SN74LV4051A ...D, DB, DGV, N, NS, OR PW PACKAGE

(TOP VIEW)

SN74LV4051A . . . RGY PACKAGE

(TOP VIEW)

116

COM

INH

GND

Summary of content (25 pages)

PAGE 1
SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H − MAY 1999 − REVISED APRIL 2005 Y4 Y6 COM Y7 Y5 INH GND GND 15 3 14 4 13 5 12 6 11 7 10 8 9 Y6 COM Y7 Y5 INH GND VCC Y2 Y1 Y0 Y3 A B C 1 16 2 15 3 14 Y2 Y1 13 Y0 12 Y3 11 A 10 B 4 5 6 7 8 GND The ’LV4051A devices handle both analog and digital signals. Each channel permits signals with amplitudes up to 5.5 V (peak) to be transmitted in either direction. 16 2 SN74LV4051A . . .
PAGE 2
SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H − MAY 1999 − REVISED APRIL 2005 FUNCTION TABLE INPUTS B A ON CHANNEL INH C L L L L Y0 L L L H Y1 L L H L Y2 L L H H Y3 L H L L Y4 L H L H Y5 L H H L Y6 L H H H Y7 H X X X None logic diagram (positive logic) 3 13 A 14 11 15 B 12 10 1 C 5 9 2 INH 2 4 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 COM Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7
PAGE 3
SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H − MAY 1999 − REVISED APRIL 2005 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7.0 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7.
PAGE 4
SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H − MAY 1999 − REVISED APRIL 2005 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TEST CONDITIONS PARAMETER VCC TA = 25°C MIN SN54LV4051A TYP MAX MIN MAX SN74LV4051A MIN MAX UNIT IT = 2 mA,, VI = VCC or GND, VINH = VIL (see Figure 1) 2.3 V 38 180 225 225 3V 30 150 190 190 4.5 V 22 75 100 100 IT = 2 mA, VI = VCC to GND, VINH = VIL 2.
PAGE 5
SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H − MAY 1999 − REVISED APRIL 2005 switching characteristics over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS COM or Yn Yn or COM TA = 25°C MIN SN54LV4051A MIN MAX SN74LV4051A MIN MAX UNIT TYP MAX CL = 15 pF, (see Figure 4) 1.
PAGE 6
SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H − MAY 1999 − REVISED APRIL 2005 analog switch characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER Frequency response (switch on) Crosstalk (control input to signal output) Feedthrough attenuation (switch off) Sine-wave distortion TA = 25°C FROM (INPUT) TO (OUTPUT) TEST CONDITIONS VCC 20 Yn or COM CL = 50 pF, p , RL = 600 Ω, fin i = 1 MHz (sine wave) (see Note 6 and
PAGE 7
SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H − MAY 1999 − REVISED APRIL 2005 PARAMETER MEASUREMENT INFORMATION VCC VINH = VIH VCC A VI (OFF) VO GND Condition 1: VI = 0, VO = VCC Condition 2: VI = VCC, VO = 0 Figure 2. Off-State Switch Leakage-Current Test Circuit VCC VINH = VIL VCC VI A (ON) Open GND VI = VCC or GND Figure 3. On-State Switch Leakage-Current Test Circuit VCC VINH = VIL VCC (ON) Input 50 Ω Output CL GND Figure 4.
PAGE 8
SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H − MAY 1999 − REVISED APRIL 2005 PARAMETER MEASUREMENT INFORMATION VCC 50 Ω VINH VCC VI S1 VO TEST S1 S2 tPLZ/tPZL tPHZ/tPZH GND VCC VCC GND 1 kΩ S2 CL GND TEST CIRCUIT VCC VCC VINH 50% 50% 0V 0V tPZH tPZL ≈VCC VOH VO 50% 50% VOL ≈0 V (tPZL, tPZH) VCC VCC VINH 50% 50% 0V 0V tPHZ tPLZ ≈VCC VOH VO VOL + 0.3 V VOL VOH − 0.3 V ≈0 V (tPLZ, tPHZ) VOLTAGE WAVEFORMS Figure 5.
PAGE 9
SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H − MAY 1999 − REVISED APRIL 2005 PARAMETER MEASUREMENT INFORMATION VCC 50 Ω VINH VCC VO GND 600 Ω RL VCC/2 CL VCC/2 Figure 7. Crosstalk (Control Input, Switch Output) VCC VINH = VCC 0.1 μF VI fin 50 Ω VCC VO (OFF) GND 600 Ω RL CL VCC/2 VCC/2 Figure 8. Feedthrough Attenuation (Switch Off) VCC VINH = GND 10 μF fin 600 Ω 10 μF VCC VO (ON) GND RL CL VCC/2 Figure 9.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 5-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.6 2.5 12.0 16.0 Q1 SN74LV4051ADBR SSOP DB 16 2000 330.0 16.4 8.2 SN74LV4051ADGVR TVSOP DGV 16 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74LV4051ADR SOIC D 16 2500 330.0 16.8 6.5 10.3 2.1 8.0 16.
PAGE 14
PACKAGE MATERIALS INFORMATION www.ti.com 5-Oct-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LV4051ADBR SSOP DB 16 2000 367.0 367.0 38.0 SN74LV4051ADGVR TVSOP DGV 16 2000 367.0 367.0 35.0 SN74LV4051ADR SOIC D 16 2500 364.0 364.0 27.0 SN74LV4051APWR TSSOP PW 16 2000 364.0 364.0 27.0 SN74LV4051APWRG4 TSSOP PW 16 2000 367.0 367.0 35.0 SN74LV4051APWT TSSOP PW 16 250 367.0 367.0 35.
PAGE 15
PAGE 16
MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0°– 8° 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 25
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.