Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - multiplexers, demultiplexers PDIP 16

2Y0

2Y2

2-COM

2Y3

2Y1

INH

GND

1Y2

1Y1

1-COM

1Y0

1Y3

SN54LV4052A . . . JO R W PACKAGE

SN74LV4052A

. . .

(TOP VIEW)

SN74LV4052A . ..RGY PACKAGE

(TOP VIEW)

1 16

8 9

1Y2

1Y1

1-COM

1Y0

1Y3

2Y2

2-COM

2Y3

2Y1

INH

GND

2Y0

GND

D, DB, DGV, N, NS, OR, PW PACKAGE

SN54LV4052A , SN74LV4052A

www.ti.com

SCLS429J –MAY 1999–REVISED OCTOBER 2012

DUAL 4-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS

Check for Samples: SN54LV4052A , SN74LV4052A

FEATURES

• 2-V to 5.5-V V

Operation

• Fast Switching

• High On-Off Output-Voltage Ratio

• Low Crosstalk Between Switches

• Extremely Low Input Current

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

DESCRIPTION

These dual 4-channel CMOS analog

multiplexers/demultiplexers are designed for 2-V to

5.5-V V

operation.

The ’LV4052A devices handle both analog and digital

signals. Each channel permits signals with amplitudes

up to 5.5 V (peak) to be transmitted in either

direction.

Applications include signal gating, chopping,

modulation or demodulation (modem), and signal

multiplexing for analog-to-digital and digital-to-analog

conversion systems.

ORDERING INFORMATION

ORDERABLE TOP-SIDE

PACKAGE

(1)

PART NUMBER MARKING

PDIP − N Tube of 25 SN74LV4052AN SN74LV4052AN

QFN − RGY Reel of 1000 SN74LV4052ARGYR LW052A

Tube of 40 SN74LV4052AD

SOIC – D LV4052A

Reel of 2500 SN74LV4052ADRG3

SOP − NS Reel of 2000 SN74LV4052ANSR 74LV4052A

–40°C to 85°C

SSOP − DB Reel of 2000 SN74LV4052ADBR LW052A

Tube of 90 SN74LV4052APW

TSSOP − PW Reel of 2000 SN74LV4052APWR LW052A

Reel of 250 SN74LV4052APWT

TVSOP − DGV Reel of 2000 SN74LV4052ADGVR LW052A

CDIP − J Tube of 25 SNJ54LV4052AJ SNJ54LV4052AJ

–55°C to 125°C

CFP − W Tube of 150 SNJ54LV4052AW SNJ54LV4052AW

(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

UNLESS OTHERWISE NOTED this document contains

PRODUCTION DATA information current as of publication date.

Products conform to specifications per the terms of Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (27 pages)

PAGE 1
SN54LV4052A , SN74LV4052A www.ti.com SCLS429J – MAY 1999 – REVISED OCTOBER 2012 DUAL 4-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS Check for Samples: SN54LV4052A , SN74LV4052A FEATURES 1 SN54LV4052A . . . JO R W PACKAGE SN74LV4052A . . . D, DB, DGV, N, NS, OR, PW PACKAGE (TOP VIEW) 2Y0 2Y2 2-COM 2Y3 2Y1 INH GND GND Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.
PAGE 2
SN54LV4052A , SN74LV4052A SCLS429J – MAY 1999 – REVISED OCTOBER 2012 www.ti.
PAGE 3
SN54LV4052A , SN74LV4052A www.ti.com SCLS429J – MAY 1999 – REVISED OCTOBER 2012 ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) (1) VALUE UNIT Supply voltage range, VCC –0.5 to 7.0 V Input voltage range, VI (2) –0.5 to 7.0 V Switch I/O voltage range, VIO (2) (3) –0.5 to VCC + 0.
PAGE 4
SN54LV4052A , SN74LV4052A SCLS429J – MAY 1999 – REVISED OCTOBER 2012 www.ti.
PAGE 5
SN54LV4052A , SN74LV4052A www.ti.com SCLS429J – MAY 1999 – REVISED OCTOBER 2012 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 2.5 V ± 0.2 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS COM or Y Y or COM SN54LV4052A TA = 25°C MIN (1) MIN MAX SN74LV4052A TYP MAX MIN CL = 15 pF, (see Figure 4) 1.
PAGE 6
SN54LV4052A , SN74LV4052A SCLS429J – MAY 1999 – REVISED OCTOBER 2012 www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS COM or Y Y or COM SN54LV4052A TA = 25°C MIN (1) MIN MAX SN74LV4052A TYP MAX MIN CL = 15 pF, (see Figure 4) 0.
PAGE 7
SN54LV4052A , SN74LV4052A www.ti.com SCLS429J – MAY 1999 – REVISED OCTOBER 2012 PARAMETER MEASUREMENT INFORMATION VCC VINH = VIL VCC VI = VCC or GND VO (ON) GND r on VI – VO 2 10 –3 W 2 mA V VI − V O Figure 1. On-State Resistance Test Circuit VCC VINH = VIH VCC A VI (OFF) VO GND Condition 1: VI = 0, VO = VCC Condition 2: VI = VCC, VO = 0 Figure 2. Off-State Switch Leakage-Current Test Circuit VCC VINH = VIL VCC A VI (ON) Open GND VI = VCC or GND Figure 3.
PAGE 8
SN54LV4052A , SN74LV4052A SCLS429J – MAY 1999 – REVISED OCTOBER 2012 www.ti.com PARAMETER MEASUREMENT INFORMATION VCC VINH = VIL VCC Input Output (ON) 50 Ω GND CL Figure 4.
PAGE 9
SN54LV4052A , SN74LV4052A www.ti.com SCLS429J – MAY 1999 – REVISED OCTOBER 2012 PARAMETER MEASUREMENT INFORMATION VCC VINH = GND 0.1 μF V I fin VCC VO (ON) GND 50 Ω RL = 600 Ω CL = 50 pF VCC/2 NOTE A: fin is a sine wave. Figure 6. Frequency Response (Switch On) VCC VINH = GND 0.1 μF VCC VI fin VO1 (ON) 600 Ω GND CL = 50 pF RL = 600 Ω 50 Ω VCC/2 VCC VINH = VCC VCC (OFF) GND 600 Ω VO2 RL = 600 Ω CL = 50 pF VCC/2 Figure 7.
PAGE 10
SN54LV4052A , SN74LV4052A SCLS429J – MAY 1999 – REVISED OCTOBER 2012 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) PARAMETER MEASUREMENT INFORMATION VCC VINH = VCC 0.1 μF VI fin 50 Ω VCC VO (OFF) GND 600 Ω RL = 600 Ω CL = 50 pF VCC/2 VCC/2 Figure 9. Feedthrough Attenuation (Switch Off) VCC VINH = GND 10 μF fin 600 Ω VI VCC VO (ON) GND RL = 10 kΩ CL = 50 pF VCC/2 Figure 10.
PAGE 11
SN54LV4052A , SN74LV4052A www.ti.com SCLS429J – MAY 1999 – REVISED OCTOBER 2012 REVISION HISTORY Changes from Original (January 2011) to Revision J • Page Updated ORDERING INFORMATION table. ........................................................................................................................
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.
PAGE 13
PACKAGE OPTION ADDENDUM www.ti.
PAGE 14
PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device.
PAGE 15
PACKAGE MATERIALS INFORMATION www.ti.com 5-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.6 2.5 12.0 16.0 Q1 SN74LV4052ADBR SSOP DB 16 2000 330.0 16.4 8.2 SN74LV4052ADGVR TVSOP DGV 16 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74LV4052ADR SOIC D 16 2500 330.0 16.8 6.5 10.3 2.1 8.0 16.
PAGE 16
PACKAGE MATERIALS INFORMATION www.ti.com 5-Oct-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LV4052ADBR SSOP DB 16 2000 367.0 367.0 38.0 SN74LV4052ADGVR TVSOP DGV 16 2000 367.0 367.0 35.0 SN74LV4052ADR SOIC D 16 2500 364.0 364.0 27.0 SN74LV4052ANSR SO NS 16 2000 367.0 367.0 38.0 SN74LV4052APWR TSSOP PW 16 2000 364.0 364.0 27.0 SN74LV4052APWRG4 TSSOP PW 16 2000 367.0 367.0 35.
PAGE 17
PAGE 18
MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0°– 8° 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
PAGE 25
PAGE 26
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 27
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.