Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Flip-Flop Preset/reset Differential TSSOP 16

www.ti.com

FEATURES

1CLK

1PRE

GND

1CLR

2CLR

2CLK

2PRE

D, DB, DGV, NS, OR PW PACKAGE

(TOP VIEW)

DESCRIPTION/ORDERING INFORMATION

SN74LVC112A

DUAL NEGATIVE-EDGE-TRIGGERED J-K FLIP-FLOP

WITH CLEAR AND PRESET

SCAS289L – JANUARY 1993 – REVISED AUGUST 2005

• Operates From 1.65 V to 3.6 V

• Inputs Accept Voltages to 5.5 V

• Max t

of 4.8 ns at 3.3 V

• Typical V

OLP

(Output Ground Bounce)

<0.8 V at V

= 3.3 V, T

= 25 ° C

• Typical V

OHV

(Output V

Undershoot)

>2 V at V

= 3.3 V, T

= 25 ° C

• Latch-Up Performance Exceeds 250 mA Per

JESD 17

• ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

This dual negative-edge-triggered J-K flip-flop is designed for 1.65-V to 3.6-V V

operation.

A low level at the preset ( PRE) or clear ( CLR) inputs sets or resets the outputs, regardless of the levels of the

other inputs. When PRE and CLR are inactive (high), data at the J and K inputs meeting the setup-time

requirements is transferred to the outputs on the negative-going edge of the clock pulse. Clock triggering occurs

at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval,

data at the J and K inputs can be changed without affecting the levels at the outputs. The SN74LVC112A can

perform as a toggle flip-flop by tying J and K high.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators

in a mixed 3.3-V/5-V system environment.

ORDERING INFORMATION

PACKAGE

(1)

ORDERABLE PART NUMBER TOP-SIDE MARKING

Tube of 40 SN74LVC112AD

SOIC – D Reel of 2500 SN74LVC112ADR LVC112A

Reel of 250 SN74LVC112ADT

SOP – NS Reel of 2000 SN74LVC112ANSR LVC112A

–40 ° C to 85 ° C SSOP – DB Reel of 2000 SN74LVC112ADBR LC112A

Tube of 90 SN74LVC112APW

TSSOP – PW Reel of 2000 SN74LVC112APWR LC112A

Reel of 250 SN74LVC112APWT

TVSOP – DGV Reel of 2000 SN74LVC112ADGVR LC112A

(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (17 pages)

PAGE 1
SN74LVC112A DUAL NEGATIVE-EDGE-TRIGGERED J-K FLIP-FLOP WITH CLEAR AND PRESET www.ti.com SCAS289L – JANUARY 1993 – REVISED AUGUST 2005 FEATURES • • • • • • • D, DB, DGV, NS, OR PW PACKAGE (TOP VIEW) Operates From 1.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Max tpd of 4.8 ns at 3.3 V Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.
PAGE 2
SN74LVC112A DUAL NEGATIVE-EDGE-TRIGGERED J-K FLIP-FLOP WITH CLEAR AND PRESET www.ti.com SCAS289L – JANUARY 1993 – REVISED AUGUST 2005 FUNCTION TABLE INPUTS (1) OUTPUTS PRE CLR CLK J K Q Q L H X X X H L H L X X X L H L L X X X H (1) H (1) H H ↓ L L Q0 Q0 H H ↓ H L H L H H ↓ L H L H H ↓ H H H H H X X H Toggle Q0 Q0 The output levels in this configuration may not meet the minimum levels for VOH.
PAGE 3
SN74LVC112A DUAL NEGATIVE-EDGE-TRIGGERED J-K FLIP-FLOP WITH CLEAR AND PRESET www.ti.com SCAS289L – JANUARY 1993 – REVISED AUGUST 2005 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range –0.5 6.5 V VI Input voltage range (2) –0.5 6.5 V –0.5 VCC + 0.
PAGE 4
SN74LVC112A DUAL NEGATIVE-EDGE-TRIGGERED J-K FLIP-FLOP WITH CLEAR AND PRESET www.ti.com SCAS289L – JANUARY 1993 – REVISED AUGUST 2005 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = –100 µA VOH 1.65 V to 3.6 V 1.65 V 1.2 IOH = –8 mA 2.3 V 1.7 2.7 V 2.2 3V 2.4 IOH = –24 mA 3V 2.2 IOL = 100 µA 1.65 V to 3.6 V 0.2 IOL = 4 mA 1.65 V 0.45 IOL = 8 mA 2.3 V 0.7 IOL = 12 mA 2.7 V 0.4 3V 0.
PAGE 5
SN74LVC112A DUAL NEGATIVE-EDGE-TRIGGERED J-K FLIP-FLOP WITH CLEAR AND PRESET www.ti.com SCAS289L – JANUARY 1993 – REVISED AUGUST 2005 PARAMETER MEASUREMENT INFORMATION VLOAD S1 RL From Output Under Test CL (see Note A) Open GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 2.7 V 3.3 V ± 0.3 V VI tr/tf VCC VCC 2.7 V 2.7 V ≤2 ns ≤2 ns ≤2.5 ns ≤2.5 ns VM VLOAD CL RL V∆ VCC/2 VCC/2 1.5 V 1.
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.6 2.5 12.0 16.0 Q1 SN74LVC112ADBR SSOP DB 16 2000 330.0 16.4 8.2 SN74LVC112ADGVR TVSOP DGV 16 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74LVC112ADR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.
PAGE 10
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LVC112ADBR SSOP DB 16 2000 367.0 367.0 38.0 SN74LVC112ADGVR TVSOP DGV 16 2000 367.0 367.0 35.0 SN74LVC112ADR SOIC D 16 2500 333.2 345.9 28.6 SN74LVC112ANSR SO NS 16 2000 367.0 367.0 38.0 SN74LVC112APWR TSSOP PW 16 2000 367.0 367.0 35.0 SN74LVC112APWT TSSOP PW 16 250 367.0 367.0 35.
PAGE 11
MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0°– 8° 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 17
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.