Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Inverter Inverter 74LVC SOIC 14

SN74LVC14A . . . RGY PACKAGE

(TOP VIEW)

1 14

7 8

GND

SN54LVC14A . . . J OR W PACKAGE

SN74LVC14A . . . D, DB, DGV, NS,

OR PW PACKAGE

(TOP VIEW)

3 2 1 20 19

9 10 11 12 13

GND

SN54LVC14A . . . FK PACKAGE

(TOP VIEW)

NC - No internal connection

SN54LVC14A, SN74LVC14A

www.ti.com

SCAS285Z –MARCH 1993–REVISED JANUARY 2014

SNx4LVC14A Hex Schmitt-Trigger Inverters

Check for Samples: SN54LVC14A, SN74LVC14A

FEATURES

DESCRIPTION

The SN54LVC14A hex Schmitt-trigger inverter is

• Operate From 1.65 V to 3.6 V

designed for 2.7-V to 3.6-V V

operation, and the

• Specified From –40°C to 85 ° C,

SN74LVC14A hex Schmitt-trigger inverter is designed

–40°C to 125°C, and –55°C to 125°C

for 1.65-V to 3.6-V V

operation.

• Inputs Accept Voltages to 5.5 V

The devices contain six independent inverters and

• Max t

of 6.4 ns at 3.3 V

perform the Boolean function Y = A.

• Typical V

OLP

(Output Ground Bounce)

Inputs can be driven from either 3.3-V or 5-V devices.

<0.8 V at V

= 3.3 V, T

= 25°C

This feature allows the use of these devices as

• Typical V

OHV

(Output V

Undershoot)

translators in a mixed 3.3-V/5-V system environment.

>2 V at V

= 3.3 V, T

= 25°C

• I

off

Support Live Insertion, Partial Power Down

Mode and Back Drive protection

• On Products Compliant to MIL-PRF-38535,

All Parameters Are Tested Unless Otherwise

Noted. On All Other Products, Production

Processing Does Not Necessarily Include

Testing of All Parameters.

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (25 pages)

PAGE 1
SN54LVC14A, SN74LVC14A www.ti.com SCAS285Z – MARCH 1993 – REVISED JANUARY 2014 SNx4LVC14A Hex Schmitt-Trigger Inverters Check for Samples: SN54LVC14A, SN74LVC14A FEATURES DESCRIPTION • • The SN54LVC14A hex Schmitt-trigger inverter is designed for 2.7-V to 3.6-V VCC operation, and the SN74LVC14A hex Schmitt-trigger inverter is designed for 1.65-V to 3.6-V VCC operation. • SN54LVC14A . . . J OR W PACKAGE SN74LVC14A . . .
PAGE 2
SN54LVC14A, SN74LVC14A SCAS285Z – MARCH 1993 – REVISED JANUARY 2014 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
PAGE 3
SN54LVC14A, SN74LVC14A www.ti.com SCAS285Z – MARCH 1993 – REVISED JANUARY 2014 Recommended Operating Conditions (1) SN54LVC14A –55 TO 125°C Operating MIN MAX 2 3.6 UNIT VCC Supply voltage VI Input voltage 0 5.5 V VO Output voltage 0 VCC V IOH High-level output current IOL Low-level output current (1) Data retention only 1.5 VCC = 2.7 V –12 VCC = 3 V –24 VCC = 2.
PAGE 4
SN54LVC14A, SN74LVC14A SCAS285Z – MARCH 1993 – REVISED JANUARY 2014 www.ti.com Electrical Characteristics over operating free-air temperature range (unless otherwise noted) SN54LVC14A PARAMETER TEST CONDITIONS VT+ Positive-going threshold VT– Negative-going threshold ΔVT Hysteresis (VT+ – VT-) VOL ICC ΔICC Ci (1) 4 UNIT TYP MAX 2.7 V 0.8 2 3V 0.9 2 3.6 V 1.1 2 2.7 V 0.4 1.4 3V 0.6 1.5 3.6 V 0.8 1.7 2.7 V 0.3 1.1 3V 0.3 1.2 0.3 1.2 2.7 V to 3.6 V V V V VCC – 0.2 2.
PAGE 5
SN54LVC14A, SN74LVC14A www.ti.com SCAS285Z – MARCH 1993 – REVISED JANUARY 2014 Electrical Characteristics over operating free-air temperature range (unless otherwise noted) SN74LVC14A PARAMETER TEST CONDITIONS VCC VT+ Positive-going threshold VT– Negative-going threshold ΔVT Hysteresis (VT+ – VT-) IOH = –100 μA VOH II ICC ΔICC Ci –40 TO 85°C –40 TO 125°C TYP MAX 1.65 V 0.4 1.3 0.4 1.3 0.4 1.3 1.95 V 0.6 1.5 0.6 1.5 0.6 1.5 2.3 V 0.8 1.7 0.8 1.7 0.8 1.7 2.5 V 0.8 1.7 0.
PAGE 6
SN54LVC14A, SN74LVC14A SCAS285Z – MARCH 1993 – REVISED JANUARY 2014 www.ti.com Switching Characteristics over operating free-air temperature range (unless otherwise noted) (see Figure 1) SN54LVC14A FROM (INPUT) PARAMETER TO (OUTPUT) VCC –55 TO 125°C MIN tpd A 2.7 V Y 7.5 3.3 V ± 0.3 V 1 UNIT MAX 6.
PAGE 7
SN54LVC14A, SN74LVC14A www.ti.com SCAS285Z – MARCH 1993 – REVISED JANUARY 2014 Parameter Measurement Information VLOAD S1 RL From Output Under Test CL (see Note A) Open GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 2.7 V 3.3 V ± 0.3 V VI tr/tf VCC VCC 2.7 V 2.7 V ≤2 ns ≤2 ns ≤2.5 ns ≤2.5 ns VM VLOAD CL RL V∆ VCC/2 VCC/2 1.5 V 1.5 V 2 × VCC 2 × VCC 6V 6V 30 pF 30 pF 50 pF 50 pF 1 kΩ 500 Ω 500 Ω 500 Ω 0.15 V 0.15 V 0.
PAGE 8
SN54LVC14A, SN74LVC14A SCAS285Z – MARCH 1993 – REVISED JANUARY 2014 www.ti.com REVISION HISTORY Changes from Revision Y (October 2010) to Revision Z Page • Updated document to new TI data sheet format. ................................................................................................................. 1 • Updated Features. ................................................................................................................................................................
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.com 27-Jan-2014 (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device.
PAGE 13
PACKAGE OPTION ADDENDUM www.ti.
PAGE 14
PACKAGE MATERIALS INFORMATION www.ti.com 27-Jan-2014 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74LVC14ADBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN74LVC14ADGVR TVSOP DGV 14 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74LVC14ADR SOIC D 14 2500 330.0 16.8 6.5 9.5 2.3 8.0 16.
PAGE 15
PACKAGE MATERIALS INFORMATION www.ti.com 27-Jan-2014 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LVC14ADBR SSOP DB 14 2000 367.0 367.0 38.0 SN74LVC14ADGVR TVSOP DGV 14 2000 367.0 367.0 35.0 SN74LVC14ADR SOIC D 14 2500 364.0 364.0 27.0 SN74LVC14ADR SOIC D 14 2500 333.2 345.9 28.6 SN74LVC14ADR SOIC D 14 2500 367.0 367.0 38.0 SN74LVC14ADRG3 SOIC D 14 2500 364.0 364.0 27.
PAGE 16
PAGE 17
PAGE 18
PAGE 19
MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0°– 8° 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 25
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.