Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Multivibrator Monostable 18.5 ns SM 8

ext

GND

DCT PACKAGE

(TOP VIEW)

YZP PACKAGE

(BOTTOM VIEW)

DCU PACKAGE

(TOP VIEW)

4 5

ext

GND

CLR

See mechanical drawings for dimensions.

CLR

ext

CLR

ext

SN74LVC1G123

www.ti.com

SCES586C –JULY 2004–REVISED OCTOBER 2013

SINGLE RETRIGGERABLE MONOSTABLE MULTIVIBRATOR

WITH SCHMITT-TRIGGER INPUTS

Check for Samples: SN74LVC1G123

FEATURES

DESCRIPTION

The SN74LVC1G123 is a single retriggerable

• Available in the Texas Instruments NanoFree™

monostable multivibrator designed for 1.65-V to 5.5-V

Package

operation.

• Supports 5-V V

Operation

This monostable multivibrator features output pulse-

• Inputs Accept Voltages to 5.5 V

duration control by three methods. In the first method,

• Max t

of 8 ns at 3.3 V

the A input is low, and the B input goes high. In the

second method, the B input is high, and the A input

• Supports Mixed-Mode Voltage Operation on

goes low. In the third method, the A input is low, the

All Ports

B input is high, and the clear (CLR) input goes high.

• Schmitt-Trigger Circuitry on A and B Inputs for

Slow Input Transition Rates

The output pulse duration is programmed by selecting

external resistance and capacitance values. The

• Edge Triggered From Active-High or Active-

external timing capacitor must be connected between

Low Gated Logic Inputs

ext

and R

ext

(positive) and an external resistor

• Retriggerable for Very Long Output Pulses, up

connected between R

ext

and V

. To obtain

to 100% Duty Cycle

variable pulse durations, connect an external variable

resistance between R

ext

and V

. The output

• Overriding Clear Terminates Output Pulse

pulse duration also can be reduced by taking CLR

• Glitch-Free Power-Up Reset on Outputs

low.

• I

off

Supports Partial-Power-Down Mode

Operation

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2NanoFree is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (24 pages)

PAGE 1
SN74LVC1G123 www.ti.com SCES586C – JULY 2004 – REVISED OCTOBER 2013 SINGLE RETRIGGERABLE MONOSTABLE MULTIVIBRATOR WITH SCHMITT-TRIGGER INPUTS Check for Samples: SN74LVC1G123 FEATURES DESCRIPTION • The SN74LVC1G123 is a single retriggerable monostable multivibrator designed for 1.65-V to 5.5-V VCC operation. 1 2 • • • • • • • • • • • • Available in the Texas Instruments NanoFree™ Package Supports 5-V VCC Operation Inputs Accept Voltages to 5.5 V Max tpd of 8 ns at 3.
PAGE 2
SN74LVC1G123 SCES586C – JULY 2004 – REVISED OCTOBER 2013 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure.
PAGE 3
SN74LVC1G123 www.ti.com SCES586C – JULY 2004 – REVISED OCTOBER 2013 Figure 2. REQUIRED TIMING CIRCUIT VCC R Rext/Cext C Cext Figure 3.
PAGE 4
SN74LVC1G123 SCES586C – JULY 2004 – REVISED OCTOBER 2013 www.ti.com Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT VCC Supply voltage range –0.5 6.5 V VI Input voltage range (2) –0.5 6.5 V VO Voltage range applied to any output in the high-impedance or power-off state (2) –0.5 6.5 V VO Voltage range applied to any output in the high or low state (2) –0.5 VCC + 0.
PAGE 5
SN74LVC1G123 www.ti.com SCES586C – JULY 2004 – REVISED OCTOBER 2013 Recommended Operating Conditions (1) VCC Supply voltage Operating Data retention only VCC = 1.65 V to 1.95 V VIH High-level input voltage VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V MIN MAX 1.65 5.5 1.5 UNIT V 0.65 × VCC 1.7 V 2 0.7 × VCC VCC = 1.65 V to 1.95 V 0.35 × VCC VCC = 2.3 V to 2.7 V 0.7 VCC = 3 V to 3.6 V 0.8 VIL Low-level input voltage VI Input voltage 0 5.
PAGE 6
SN74LVC1G123 SCES586C – JULY 2004 – REVISED OCTOBER 2013 www.ti.com Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS –40°C to 85°C SN74LVC1G123 VCC MIN 1.65 V to 5.5 V IOH = –100 μA VOH 1.2 1.2 2.3 V 1.9 1.9 2.4 2.4 2.3 2.3 3.8 3.8 IOL = 100 μA 1.65 V to 5.5 V 0.1 0.1 IOL = 4 mA 1.65 V 0.45 0.45 IOL = 8 mA 2.3 V 0.3 0.3 0.4 0.4 0.55 0.55 3V B = GND, A = CLR = VCC A, B, CLR VI = 5.
PAGE 7
SN74LVC1G123 www.ti.com SCES586C – JULY 2004 – REVISED OCTOBER 2013 Timing Requirements over recommended operating free-air temperature range (unless otherwise noted) (see Figure 4) SN74LVC1G123 –40°C to 125°C PARAMETER TEST CONDITIONS VCC = 1.8 V ± 0.15 V MIN twIN MIN VCC = 3.3 V ± 0.3 V TYP MIN TYP VCC = 5 V ± 0.5 V MIN 8 4 3 2.5 A or B trigger 8 4 3 2.5 Pulse duration CLR Rext = 1 kΩ trr TYP VCC = 2.5 V ± 0.2 V Pulse retrigger time Rext = 5 kΩ UNIT TYP ns Cext = 100 pF 5.
PAGE 8
SN74LVC1G123 SCES586C – JULY 2004 – REVISED OCTOBER 2013 www.ti.com Switching Characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 5) SN74LVC1G123 –40°C to 125°C PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS VCC = 1.8 V ± 0.15 V MIN A or B tpd CLR Q CLR trigger twOUT (2) (1) (2) Q TYP (1) VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.3 V VCC = 5 V ± 0.5 V UNIT MAX MIN MAX MIN MAX MIN MAX 6 58 3 19.5 2 13.2 1.5 8.
PAGE 9
SN74LVC1G123 www.ti.com SCES586C – JULY 2004 – REVISED OCTOBER 2013 PARAMETER MEASUREMENT INFORMATION VLOAD S1 RL From Output Under Test CL (see Note A) Open GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 3.3 V ± 0.3 V 5 V ± 0.5 V VI tr/tf VCC VCC 3V VCC ≤2 ns ≤2 ns ≤2.5 ns ≤2.5 ns VM VLOAD CL RL V∆ VCC/2 VCC/2 1.5 V VCC/2 2 × VCC 2 × VCC 6V 2 × VCC 15 pF 15 pF 15 pF 15 pF 1 MΩ 1 MΩ 1 MΩ 1 MΩ 0.15 V 0.15 V 0.3 V 0.
PAGE 10
SN74LVC1G123 SCES586C – JULY 2004 – REVISED OCTOBER 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION VLOAD S1 RL From Output Under Test CL (see Note A) Open GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 3.3 V ± 0.3 V 5 V ± 0.5 V VI tr/tf VCC VCC 3V VCC ≤2 ns ≤2 ns ≤2.5 ns ≤2.5 ns VM VLOAD CL RL V∆ VCC/2 VCC/2 1.5 V VCC/2 2 × VCC 2 × VCC 6V 2 × VCC 30 pF 30 pF 50 pF 50 pF 1 kΩ 500 Ω 500 Ω 500 Ω 0.15 V 0.15 V 0.3 V 0.
PAGE 11
SN74LVC1G123 www.ti.com SCES586C – JULY 2004 – REVISED OCTOBER 2013 APPLICATION INFORMATION Operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. OUTPUT PULSE DURATION vs EXTERNAL TIMING CAPACITANCE tw − Output Pulse Duration − ns 109 108 107 VCC = 1.8 V TA = 25°C 106 105 104 103 RL = 5 kΩ 10 kΩ 100 kΩ 200 kΩ 102 101 1 10 102 103 104 105 106 Cext − External Timing Capacitance − pF Figure 6.
PAGE 12
SN74LVC1G123 SCES586C – JULY 2004 – REVISED OCTOBER 2013 OUTPUT PULSE DURATION vs EXTERNAL TIMING CAPACITANCE 109 tw − Output Pulse Duration − ns www.ti.com VCC = 5 V TA = 25°C 108 107 106 105 104 RL = 1 kΩ 5 kΩ 10 kΩ 100 kΩ 200 kΩ 103 102 101 1 10 102 103 104 105 106 Cext − External Timing Capacitance − pF Figure 8. tw − Output Pulse Duration Constant − K OUTPUT PULSE DURATION CONSTANT vs SUPPLY VOLTAGE 1.3 1.25 1000 pF 1.2 1.15 1.1 0.01 µF 1.05 1 0.1 mF 0.95 0.
PAGE 13
SN74LVC1G123 www.ti.com SCES586C – JULY 2004 – REVISED OCTOBER 2013 MINIMUM RETRIGGER TIME vs SUPPLY VOLTAGE Minimum Retrigger Time − µs 10 0.01 µF 1 1000 pF 100 pF 0.1 10 pF 0.01 1.65 2.3 3 3.3 4.5 5 5.5 VCC − Supply Voltage − V Figure 10.
PAGE 14
SN74LVC1G123 SCES586C – JULY 2004 – REVISED OCTOBER 2013 www.ti.com REVISION HISTORY Changes from Revision B (January 2007) to Revision C Page • Updated document to new TI datasheet format - no specification changes ........................................................................ 1 • Removed Ordering Information table. ................................................................................................................................... 2 • Updated operating temperature range. .
PAGE 15
PACKAGE OPTION ADDENDUM www.ti.
PAGE 16
PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined.
PAGE 17
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74LVC1G123DCUR US8 DCU 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.0 Q3 SN74LVC1G123YZPR DSBGA YZP 8 3000 178.0 9.2 1.02 2.02 0.63 4.0 8.
PAGE 18
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LVC1G123DCUR US8 DCU 8 3000 202.0 201.0 28.0 SN74LVC1G123YZPR DSBGA YZP 8 3000 220.0 220.0 35.
PAGE 19
MECHANICAL DATA MPDS049B – MAY 1999 – REVISED OCTOBER 2002 DCT (R-PDSO-G8) PLASTIC SMALL-OUTLINE PACKAGE 0,30 0,15 0,65 8 0,13 M 5 0,15 NOM ÇÇÇÇÇ ÇÇÇÇÇ ÇÇÇÇÇ ÇÇÇÇÇ 2,90 2,70 4,25 3,75 Gage Plane PIN 1 INDEX AREA 1 0,25 4 0° – 8° 3,15 2,75 0,60 0,20 1,30 MAX Seating Plane 0,10 0,10 0,00 NOTES: A. B. C. D. 4188781/C 09/02 All linear dimensions are in millimeters. This drawing is subject to change without notice.
PAGE 20
PAGE 21
PAGE 22
PAGE 23
D: Max = 1.918 mm, Min =1.858 mm E: Max = 0.918 mm, Min =0.
PAGE 24
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.