Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Inverter Inverter 74LVC SC 70 6

1A 1Y

GND

DBV PACKAGE

(TOP VIEW)

YZP PACKAGE

(BOTTOM VIEW)

DCK PACKAGE

(TOP VIEW)

1A 1Y

GND

See mechanical drawings for dimensions.

SN74LVC2G14

www.ti.com

SCES200M –APRIL 1999–REVISED NOVEMBER 2013

Dual Schmitt-Trigger Inverter

Check for Samples: SN74LVC2G14

FEATURES

DESCRIPTION

This dual Schmitt-trigger inverter is designed for 1.65-

• Available in the Texas Instruments NanoFree™

V to 5.5-V V

operation.

Package

NanoFree™ package technology is a major

• Supports 5-V V

Operation

breakthrough in IC packaging concepts, using the die

• Inputs Accept Voltages to 5.5 V

as the package.

• Max t

of 5.4 ns at 3.3 V

The SN74LVC2G14 contains two inverters and

• Low Power Consumption, 10-μA Max I

performs the Boolean function Y = A. The device

• ±24-mA Output Drive at 3.3 V

functions as two independent inverters, but because

of Schmitt action, it may have different input threshold

• Typical V

OLP

(Output Ground Bounce)

levels for positive-going (V

T+

) and negative-going

<0.8 V at V

= 3.3 V, T

= 25°C

T–

) signals.

• Typical V

OHV

(Output V

Undershoot)

This device is fully specified for partial-power-down

>2 V at V

= 3.3 V, T

= 25°C

applications using I

off

. The I

off

circuitry disables the

• I

off

Supports Live Insertion, Partial Power

outputs, preventing damaging current backflow

Down Mode, and Back Drive Protection

through the device when it is powered down.

• Support Translation Down (5V to 3.3V; 3.3V to

1.8V)

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 1000-V Charged-Device Model (C101)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2NanoFree is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (17 pages)

PAGE 1
SN74LVC2G14 www.ti.com SCES200M – APRIL 1999 – REVISED NOVEMBER 2013 Dual Schmitt-Trigger Inverter Check for Samples: SN74LVC2G14 FEATURES DESCRIPTION • This dual Schmitt-trigger inverter is designed for 1.65V to 5.5-V VCC operation. 1 2 • • • • • • • • • • • Available in the Texas Instruments NanoFree™ Package Supports 5-V VCC Operation Inputs Accept Voltages to 5.5 V Max tpd of 5.4 ns at 3.3 V Low Power Consumption, 10-μA Max ICC ±24-mA Output Drive at 3.
PAGE 2
SN74LVC2G14 SCES200M – APRIL 1999 – REVISED NOVEMBER 2013 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
PAGE 3
SN74LVC2G14 www.ti.com SCES200M – APRIL 1999 – REVISED NOVEMBER 2013 Recommended Operating Conditions (1) VCC Supply voltage VI Input voltage VO Output voltage IOH Operating Data retention only High-level output current MIN MAX 1.65 5.5 1.5 5.5 V 0 VCC V VCC = 1.65 V –4 VCC = 2.3 V –8 –16 VCC = 3 V –32 4 VCC = 2.3 V 8 16 VCC = 3 V (1) Operating free-air temperature mA 24 VCC = 4.5 V TA mA –24 VCC = 1.65 V Low-level output current V 0 VCC = 4.
PAGE 4
SN74LVC2G14 SCES200M – APRIL 1999 – REVISED NOVEMBER 2013 www.ti.com Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC VT+ Positive-going input threshold voltage VT– Negative-going input threshold voltage ΔVT Hysteresis (VT+ – VT–) VOH VOL II A input TYP (1) –40°C to 125°C MAX MIN TYP (1) MAX 1.65 V 0.7 1.4 0.7 1.4 2.3 V 1 1.7 1 1.7 3V 1.3 2.2 1.3 2.2 4.5 V 1.9 3.1 1.9 3.1 5.5 V 2.
PAGE 5
SN74LVC2G14 www.ti.com SCES200M – APRIL 1999 – REVISED NOVEMBER 2013 Switching Characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1) SN74LVC2G14 –40°C to 85°C PARAMETER FROM (INPUT) TO (OUTPUT) tpd A Y VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.3 V VCC = 5 V ± 0.5 V UNIT MIN MAX MIN MAX MIN MAX MIN MAX 3.9 9.5 1.9 5.7 2 5.4 1.5 4.
PAGE 6
SN74LVC2G14 SCES200M – APRIL 1999 – REVISED NOVEMBER 2013 www.ti.com Parameter Measurement Information VLOAD S1 RL From Output Under Test Open TEST GND CL (see Note A) S1 Open VLOAD tPLH/tPHL tPLZ/tPZL tPHZ/tPZH RL GND LOAD CIRCUIT INPUTS VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 3.3 V ± 0.3 V 5 V ± 0.5 V VI tr/tf VCC VCC 3V VCC £2 ns £2 ns £2.5 ns £2.5 ns VM VLOAD CL RL VD VCC/2 VCC/2 1.5 V VCC/2 2 × VCC 2 × VCC 6V 2 × VCC 30 pF 30 pF 50 pF 50 pF 1 kW 500 W 500 W 500 W 0.15 V 0.15 V 0.
PAGE 7
SN74LVC2G14 www.ti.com SCES200M – APRIL 1999 – REVISED NOVEMBER 2013 REVISION HISTORY Changes from Revision L (January 2007) to Revision M Page • Updated document to new TI data sheet format. ................................................................................................................. 1 • Added ESD warning. ............................................................................................................................................................
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.com 30-Oct-2013 NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.
PAGE 10
PACKAGE MATERIALS INFORMATION www.ti.com 23-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) SN74LVC2G14DBVR SOT-23 DBV 6 3000 178.0 9.0 3.17 1.37 4.0 8.0 Q3 SN74LVC2G14DBVR SOT-23 DBV 6 3000 178.0 9.2 SN74LVC2G14DBVR SOT-23 DBV 6 3000 180.0 9.2 3.3 3.2 1.55 4.0 8.0 Q3 3.17 3.23 1.37 4.0 8.0 SN74LVC2G14DBVT SOT-23 DBV 6 250 180.
PAGE 11
PACKAGE MATERIALS INFORMATION www.ti.com 23-Oct-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LVC2G14DBVR SOT-23 DBV 6 3000 180.0 180.0 18.0 SN74LVC2G14DBVR SOT-23 DBV 6 3000 180.0 180.0 18.0 SN74LVC2G14DBVR SOT-23 DBV 6 3000 205.0 200.0 33.0 SN74LVC2G14DBVT SOT-23 DBV 6 250 205.0 200.0 33.0 SN74LVC2G14DBVT SOT-23 DBV 6 250 180.0 180.0 18.0 SN74LVC2G14DCKR SC70 DCK 6 3000 180.
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
D: Max = 1.418 mm, Min =1.358 mm E: Max = 0.918 mm, Min =0.
PAGE 17
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.