Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Buffer, driver SOT 23 6

GND

VCC

GND

VCC

DRY PACKAGE

(TOP VIEW)

DSF PACKAGE

(TOP VIEW)

GND

VCC

YZP PACKAGE

(BOTTOM VIEW)

GND

VCC

DCK PACKAGE

(TOP VIEW)

VCC

DBV PACKAGE

(TOP VIEW)

GND

SN74LVC2G17

www.ti.com

SCES381M –JANUARY 2002–REVISED NOVEMBER 2013

Dual Schmitt Trigger Buffer

Check for Samples: SN74LVC2G17

FEATURES

DESCRIPTION

This dual Schmitt-trigger buffer is designed for 1.65-V

• Available in the Texas Instruments NanoFree ™

to 5.5-V V

operation.

Package

The SN74LVC2G17 contains two buffers and

• Supports 5-V V

Operation

performs the Boolean function Y = A. The device

• Inputs Accept Voltages to 5.5 V

functions as two independent buffers, but because of

• Max t

of 5.4 ns at 3.3 V

Schmitt action, it may have different input threshold

levels for positive-going (V

T+

) and negative-going

• Low Power Consumption, 10-μA Max I

T–

) signals.

• ±24-mA Output Drive at 3.3 V

NanoFree™ package technology is a major

• Typical V

OLP

(Output Ground Bounce)

breakthrough in IC packaging concepts, using the die

<0.8 V at V

= 3.3 V, T

= 25° C

as the package.

• Typical V

OHV

(Output V

Undershoot)

This device is fully specified for partial-power-down

>2 V at V

= 3.3 V, T

= 25° C

applications using I

off

. The I

off

circuitry disables the

• I

off

Supports Live Insertion, Partial-Power-

outputs, preventing damaging current backflow

Down Mode Operation and Back Drive

through the device when it is powered down.

Protection

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 1000-V Charged-Device Model (C101)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2NanoFree is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (22 pages)

PAGE 1
SN74LVC2G17 www.ti.com SCES381M – JANUARY 2002 – REVISED NOVEMBER 2013 Dual Schmitt Trigger Buffer Check for Samples: SN74LVC2G17 FEATURES DESCRIPTION • This dual Schmitt-trigger buffer is designed for 1.65-V to 5.5-V VCC operation. 1 2 • • • • • • • • • • Available in the Texas Instruments NanoFree™ Package Supports 5-V VCC Operation Inputs Accept Voltages to 5.5 V Max tpd of 5.4 ns at 3.3 V Low Power Consumption, 10-μA Max ICC ±24-mA Output Drive at 3.3 V Typical VOLP (Output Ground Bounce) <0.
PAGE 2
SN74LVC2G17 SCES381M – JANUARY 2002 – REVISED NOVEMBER 2013 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure.
PAGE 3
SN74LVC2G17 www.ti.com SCES381M – JANUARY 2002 – REVISED NOVEMBER 2013 Recommended Operating Conditions (1) MIN MAX 1.65 5.5 V Input voltage 0 5.5 V Output voltage 0 VCC V VCC Supply voltage VI VO Operating VCC = 1.65 V –4 VCC = 2.3 V IOH High-level output current –8 –16 VCC = 3 V –32 VCC = 1.65 V 4 VCC = 2.3 V Low-level output current 8 16 VCC = 3 V (1) Operating free-air temperature mA 24 VCC = 4.5 V TA mA –24 VCC = 4.
PAGE 4
SN74LVC2G17 SCES381M – JANUARY 2002 – REVISED NOVEMBER 2013 www.ti.com Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VT+ Positive-going input threshold voltage VT– Negative-going input threshold voltage ΔVT Hysteresis (VT+ – VT–) –40°C to 85°C VCC MIN 1.4 0.7 1.4 1.7 1.0 1.7 3V 1.3 2.0 1.3 2.0 4.5 V 1.9 3.1 1.9 3.1 5.5 V 2.2 3.7 2.2 3.7 1.65 V 0.3 0.7 0.3 0.7 2.3 V 0.4 1 0.4 1.
PAGE 5
SN74LVC2G17 www.ti.com SCES381M – JANUARY 2002 – REVISED NOVEMBER 2013 Switching Characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1) SN74LVC2G17 –40°C to 125°C PARAMETER FROM (INPUT) TO (OUTPUT) tpd A Y VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.3 V VCC = 5 V ± 0.5 V UNIT MIN MAX MIN MAX MIN MAX MIN MAX 3.9 9.8 1.9 6.2 2.2 5.9 1.5 4.
PAGE 6
SN74LVC2G17 SCES381M – JANUARY 2002 – REVISED NOVEMBER 2013 www.ti.com Parameter Measurement Information VLOAD S1 RL From Output Under Test Open TEST GND CL (see Note A) S1 Open VLOAD tPLH/tPHL tPLZ/tPZL tPHZ/tPZH RL GND LOAD CIRCUIT INPUTS VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 3.3 V ± 0.3 V 5 V ± 0.5 V VI tr/tf VCC VCC 3V VCC £2 ns £2 ns £2.5 ns £2.5 ns VM VLOAD CL RL VD VCC/2 VCC/2 1.5 V VCC/2 2 × VCC 2 × VCC 6V 2 × VCC 30 pF 30 pF 50 pF 50 pF 1 kW 500 W 500 W 500 W 0.15 V 0.15 V 0.
PAGE 7
SN74LVC2G17 www.ti.com SCES381M – JANUARY 2002 – REVISED NOVEMBER 2013 REVISION HISTORY Changes from Revision J (June 2012) to Revision K • Page Updated pin out graphic. ....................................................................................................................................................... 1 Changes from Revision K (July 2012) to Revision L • Page Updated document to new TI datasheet format - no specification changes .....................................................
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE MATERIALS INFORMATION www.ti.com 12-Nov-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) SN74LVC2G17DBVR SOT-23 DBV 6 3000 180.0 9.2 3.23 1.37 4.0 8.0 Q3 SN74LVC2G17DBVR SOT-23 DBV 6 3000 178.0 9.2 SN74LVC2G17DBVR SOT-23 DBV 6 3000 178.0 9.0 3.3 3.2 1.55 4.0 8.0 Q3 3.23 3.17 1.37 4.0 8.0 SN74LVC2G17DBVT SOT-23 DBV 6 250 180.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 12-Nov-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LVC2G17DBVR SOT-23 DBV 6 3000 205.0 200.0 33.0 SN74LVC2G17DBVR SOT-23 DBV 6 3000 180.0 180.0 18.0 SN74LVC2G17DBVR SOT-23 DBV 6 3000 180.0 180.0 18.0 SN74LVC2G17DBVT SOT-23 DBV 6 250 205.0 200.0 33.0 SN74LVC2G17DBVT SOT-23 DBV 6 250 180.0 180.0 18.0 SN74LVC2G17DCKR SC70 DCK 6 3000 205.
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
D: Max = 1.418 mm, Min =1.358 mm E: Max = 0.918 mm, Min =0.
PAGE 22
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.